Machine Tools 24/7 is your one stop location source for used machinery.

"Mazak","Quick Turn-10N","1986","LATHES, CNC, 2-AXIS, UNIVERSAL",10128,"Mazatrol T-1","Fair","Yes",,"1986 Mazak Quick Turn-10N Mazatrol T-1","L2150","-1","On Way","17.6""","6.5"" x 21.4""","3,600","1.55""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Quick Turn-15N","1989","LATHES, CNC, 2-AXIS, UNIVERSAL",11423,"Mazatrol T-32-2","Good","Yes",,"1989 Mazak Quick Turn-15N Mazatrol T-32-2","L2150","0","Yes","17.32""","7.09"" x 20.08""","4,500","1.96""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Quick Turn-15N","1992","LATHES, CNC, 2-AXIS, UNIVERSAL",10835,"Mazatrol T-32B","Good","Yes",,"1992 Mazak Quick Turn-15N Mazatrol T-32B","L2150","0","Yes","17.32""","7.09"" x 20.08""","4,500","1.96""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","M-5NR 2000","2001","LATHES, CNC, 2-AXIS, UNIVERSAL",11658,"Mazatrol Fusion 640T","Very Good","Yes",,"2001 Mazak M-5NR 2000 Mazatrol Fusion 640T","L2150","0","Yes","24""","21.25"" x 82""","1,000","6.5""","8 / 6","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Quick Turn-10N","1988","LATHES, CNC, 2-AXIS, UNIVERSAL",9155,"Mazatrol T-2","Very Good","Yes",,"1988 Mazak Quick Turn-10N Mazatrol T-2","L2150","0","Yes","17.6""","6.5"" x 21.4""","3,600","1.55""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Powermaster 3000","1978/1998","LATHES, CNC, 2-AXIS, UNIVERSAL",11386,"Fanuc 21iT","Very Good","Yes",,"1978/1998 Mazak Powermaster 3000 Fanuc 21iT","L2150","0","Yes","30""","22"" x 123""","1,500","4.62""","8 + 4","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Quick Turn-20","1998","LATHES, CNC, 2-AXIS, UNIVERSAL",11005,"Mazatrol T-PLUS","Very Good","Yes",,"1998 Mazak Quick Turn-20 Mazatrol T-PLUS","L2150","0","Yes","17.32""","7.125"" x 20.125""","5,000","2""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mighty Viper","VT-25B","1999","LATHES, CNC, 2-AXIS, UNIVERSAL",11299,"Fanuc 18T","Good","Yes",,"1999 Mighty Viper VT-25B Fanuc 18T","L2150","0","Yes","19.6""","9.44"" x 23.62""","4,000","3""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","SL-600C / 1000","1999","LATHES, CNC, 2-AXIS, UNIVERSAL",11434,"MSC-501 (Fanuc 21T)","Good","Yes",,"1999 Mori-Seiki SL-600C / 1000 MSC-501 (Fanuc 21T)","L2150","0","Yes","40.55""","19.09"" x 45.28""","700","10.8""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","NL-2000 / 500","2009","LATHES, CNC, 2-AXIS, UNIVERSAL",11168,"Mori-Seiki MSX-850","Very Good","Yes",,"2009 Mori-Seiki NL-2000 / 500 Mori-Seiki MSX-850","L2150","-1","Yes","36.4""","10.2"" x 23.2"" x 3.9""","5,000","2.5","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","SL-403C / 2000","2008","LATHES, CNC, 2-AXIS, UNIVERSAL",11405,"Mori-Seiki MSX-500","Excellent","Yes",,"2008 Mori-Seiki SL-403C / 2000 Mori-Seiki MSX-500","L2150","0","Yes","36.8""","13.6"" x 79.1""","1,500","7.2""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","LL-7B 3000","1981/1999","LATHES, CNC, 2-AXIS, UNIVERSAL",11407,"Fanuc 16iT","Good","Yes",,"1981/1999 Mori-Seiki LL-7B 3000 Fanuc 16iT","L2150","0","Yes","42.9""","26.5"" x 120""","1,150","4.1""","4 + 4","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","LL-7B 1500","1980","LATHES, CNC, 2-AXIS, UNIVERSAL",10644,,"Retro Fit Candidate","No",,"1980 Mori-Seiki LL-7B 1500 ","L2150","0","Yes","42.9""","26.5"" x 58""","750","8 5/8""","4 + 8","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","LL-8B 2500","1990","LATHES, CNC, 2-AXIS, UNIVERSAL",11397,"Fanuc 15T","Very Good","Yes",,"1990 Mori-Seiki LL-8B 2500 Fanuc 15T","L2150","0","Yes","54""","28.1"" x 98""","550","10.23""","6 + 4","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","SL-75A","1988","LATHES, CNC, 2-AXIS, UNIVERSAL",11356,"Fanuc 10T","Good","Yes",,"1988 Mori-Seiki SL-75A Fanuc 10T","L2150","0","Yes","35.8""","15.75"" x 61.02""","1,010","6.375""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","SL-65A","1989","LATHES, CNC, 2-AXIS, UNIVERSAL",11114,"Fanuc 10T","Good","Yes",,"1989 Mori-Seiki SL-65A Fanuc 10T","L2150","0","Yes","35""","13.8"" x 33.9""","1,800","3.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","SL-65A","1988","LATHES, CNC, 2-AXIS, UNIVERSAL",11462,"Fanuc 10T","Good","Yes",,"1988 Mori-Seiki SL-65A Fanuc 10T","L2150","0","On Way","35""","13.8"" x 33.9""","1,800","4""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LNC-8","1993","LATHES, CNC, 2-AXIS, UNIVERSAL",11489,"OSP-5020L","Very Good","Yes",,"1993 Okuma LNC-8 OSP-5020L","L2150","0","Yes","21.65""","6.89"" x 20.47""","4,200","1.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","Crown 762 BB","1997","LATHES, CNC, 2-AXIS, UNIVERSAL",11569,"OSP-700L","Good","Yes",,"1997 Okuma Crown 762 BB OSP-700L","L2150","0","Yes","21.65""","7.28"" x 20.47""","3,500","2.75""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","Crown L-1060 SB","1997","LATHES, CNC, 2-AXIS, UNIVERSAL",11499,"OSP-700L","Very Good","Yes",,"1997 Okuma Crown L-1060 SB OSP-700L","L2150","0","Yes","21.65""","7.28"" x 20.47""","4,200","2""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LB-25 II","1996","LATHES, CNC, 2-AXIS, UNIVERSAL",11352,"OSP-7000L","Very Good","Yes",,"1996 Okuma LB-25 II OSP-7000L","L2150","0","Yes","18.9""","11.82"" x 52""","2,500","2.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","Cadet L-1420 / 650 BB","1996","LATHES, CNC, 2-AXIS, UNIVERSAL",11650,"OSP-5020L","Good","Yes",,"1996 Okuma Cadet L-1420 / 650 BB OSP-5020L","L2150","0","Yes","24.41""","9.05"" x 26.38""","3,500","3.15""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","Cadet L-1420 / 650","1997","LATHES, CNC, 2-AXIS, UNIVERSAL",11649,"OSP-700L","Very Good","Yes",,"1997 Okuma Cadet L-1420 / 650 OSP-700L","L2150","0","Yes","24.41""","9.05"" x 26.38""","3,500","3.15""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LB-15 BB","1995","LATHES, CNC, 2-AXIS, UNIVERSAL",11570,"OSP-5020L","Fair","Yes",,"1995 Okuma LB-15 BB OSP-5020L","L2150","0","Yes","15.75""","6.75"" x 20.47""","3,500","2.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LC-30 1SC / 1000","1982","LATHES, CNC, 2-AXIS, UNIVERSAL",10831,"OSP-3000L","Good","Yes","19.69"" Swing, 16.14 SOC, 17.72 Max. Dia., 38.58 Length, 2.5"" Bar Cap., 30 HP, 12 Sta. Turret, Tailstock, 10"" 3-Jaw Chuck, Miscellaneous Tool Holders, Chip Conveyor, Coolant System, RS-232 Port","1982 Okuma LC-30 1SC / 1000 OSP-3000L","L2150","0","Yes","19.69""","11.42"" x 40.16""","3,000","2.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","Cadet LNC-8 BB","1995","LATHES, CNC, 2-AXIS, UNIVERSAL",11640,"OSP-5020L","Good","Yes",,"1995 Okuma Cadet LNC-8 BB OSP-5020L","L2150","0","Yes","21.65""","8.23"" x 19.68""","3,500","2.75""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","Crown L-1420 / 650 BB","2002","LATHES, CNC, 2-AXIS, UNIVERSAL",11639,"OSP-U10L","Very Good","Yes","24.41 Swing, 18.90"" S.O.C. , 14.17"" Turning Dia., 27"" Centers, 2,800 RPM, 30 HP, 4.72 Spindle Bore, 12 Sta. Turret, 15"" 3-Jaw Kitagawa Hydraulic Chuck, Tailstock","2002 Okuma Crown L-1420 / 650 BB OSP-U10L","L2150","0","Yes","24.41""","9.05"" x 26.38""","2,800","3.62""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LB-45 II SBB 1000 C","2008","LATHES, CNC, 2-AXIS, UNIVERSAL",11520,"OSP-P200L","Very Good","Yes",,"2008 Okuma LB-45 II SBB 1000 C OSP-P200L","L2150","0","Yes","33.7""","17.32"" x 42.91""","900","10.23""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma and Howa","ACT-30","1992","LATHES, CNC, 2-AXIS, UNIVERSAL",11596,"Fanuc 18T","Good","Yes",,"1992 Okuma and Howa ACT-30 Fanuc 18T","L2150","0","Yes","18.28""","6.16"" x 23.85""","3,500","3.125""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Stanko","CAK6163D",,"LATHES, CNC, 2-AXIS, UNIVERSAL",9597,"Fanuc 0iTC","Very Good","Yes","24.8"" Swing, 1,000 RPM, 5 HP, 112.2"" x 12.6"" Travels, 4.9"" Spindle Bore, 4 Position Turret, Two (2) Steady Rests, Tailstock, Coolant System"," Stanko CAK6163D Fanuc 0iTC","L2150","0","Yes","24.8""","12.6"" x 112.2""","1,000","4.9""","4","Swing","Travels","RPM","Bar Cap.","Stations"
"Supermax","GT-250B","2007","LATHES, CNC, 2-AXIS, UNIVERSAL",11300,"TXP-100E","Very Good","Yes",,"2007 Supermax GT-250B TXP-100E","L2150","0","Yes","21.6""","9.4"" x 22.3""","3,500","2.9","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Toolmex","TUR-930 MN/236","2008","LATHES, CNC, 2-AXIS, UNIVERSAL",7750,"Fanuc 21iT","New","Yes",,"2008 Toolmex TUR-930 MN/236 Fanuc 21iT","L2150","0","Yes","37.4""","19.3"" x 238""","1,200","5.5""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Daewoo","Puma-230 SA","2001","LATHES, CNC, 2-AXIS, W-SUB-SPINDLE",11410,"Fanuc 18iT","Good","Yes",,"2001 Daewoo Puma-230 SA Fanuc 18iT","L2125S","0","Yes","20.1""","8.7"" x 22.83""","6,000","1.55""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Haas","TL-25","2007","LATHES, CNC, 2-AXIS, W-SUB-SPINDLE",11503,"Haas 32 BIT","Very Good","Yes",,"2007 Haas TL-25 Haas 32 BIT","L2125S","-1","Yes","30""","11.3"" x 36""","3,500","3""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Doosan","Puma-800M","2009","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",11720,"Fanuc 21iT","Very Good","Yes",,"2009 Doosan Puma-800M Fanuc 21iT","L2150M","0","Yes","40.5""","18.5"" x 65""","750","12.6""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Doosan","Lynx-220LM","2007","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",11707,"Fanuc OiTC","Excellent","Yes",,"2007 Doosan Lynx-220LM Fanuc OiTC","L2150M","0","Yes","20.1""","6.3"" x 20.9""","4,000","2.62""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Haas","SL-20TM","2006","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",10899,"Haas 32 BIT","Very Good","Yes",,"2006 Haas SL-20TM Haas 32 BIT","L2150M","0","Yes","23”","8.45"" x 20""","4,000","2","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Haas","SL-20TM","2006","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",10898,"Haas 32 BIT","Very Good","Yes",,"2006 Haas SL-20TM Haas 32 BIT","L2150M","0","Yes","23""","8.45"" x 20""","4,000","2.06""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Haas","SL-30TM","2000","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",11442,"Haas 32 BIT","Very Good","Yes","Swing Over Bed 30"", Swing Over Saddle 19"", Maximum Turning Diameter 14.5"", Length 25"", 3,400 RPM, 30 HP, 12 Sta. Turret, 15"" 3-Jaw Chuck, Programmable Tailstock, Rigid Tapping, Tool Pre-Setter, Rebuilt Spindle (under 1,000 hours), Parts Catcher, New Non-Pullback S-26 Collet Chuck","2000 Haas SL-30TM Haas 32 BIT","L2150M","0","Yes","30""","17"" x 34""","3,000","3""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Hitachi-Seiki","Hi-Cell CA-40","1998","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",11170,"Seicos Sigma LIII","Good","Yes",,"1998 Hitachi-Seiki Hi-Cell CA-40 Seicos Sigma LIII","L2150M","0","Yes","27.6""","13"" x 41.3""","1,800","4""","24","Swing","Travels","RPM","Bar Cap.","Stations"
"Emco Maier","Emco-Turn 365","1998","LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE",11505,"Siemens 840D","Excellent","Yes",,"1998 Emco Maier Emco-Turn 365 Siemens 840D","L21254MS","-1","Yes","23.62""","8.2677"" x 24.0157""","4,200","2.56""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Emco Maier","Emco-Turn 332","2000","LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE",9450,"Siemens 840D","Very Good","No","16.92"" Swing, 11.42"" SOC, 8.66"" Max. Cut Dia., 18.99"" Max. Cut Length, 8,000 RPM, 2 - 12 Sta. Turrets, 17 HP Main, 13 HP Sub., 16C Collet Chuck on Main and Sub Spindle, Coolant Through Sub-Spindle, Parts Catcher, Bar Feed Interface, Live Tooling, LNS Quick Load Servo 2 Bar Feed, Parts Ejector on Sub-Spindle, Mist / Oil Collector, High Pressure Coolant, Live and Standard Tool Holders","2000 Emco Maier Emco-Turn 332 Siemens 840D","L21254MS","-1","Yes","16.92""","6.299"" x 20.07""","8,000","1.25""","24","Swing","Travels","RPM","Bar Cap.","Stations"
"Hardinge","Conquest TT-65Y","2001","LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE",11554,"Fanuc 18iT","Very Good","Yes",,"2001 Hardinge Conquest TT-65Y Fanuc 18iT","L21254MS","0","Yes","19.45""","5.51"" x 20.47""","4,000","2.56""","10 x 2","Swing","Travels","RPM","Bar Cap.","Stations"
"Hardinge","Conquest TT-65 MC","2000","LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE",11566,"Fanuc 18iT","Very Good","Yes",,"2000 Hardinge Conquest TT-65 MC Fanuc 18iT","L21254MS","-1","Yes","19.45""","5.51"" x 20.47""","4,000","2.5""","12 x 2","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","ZL-153 SMC","2003","LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE",10768,"Mori-Seiki MSG-501","Very Good","Yes",,"2003 Mori-Seiki ZL-153 SMC Mori-Seiki MSG-501","L21254MS","0","Yes","26.77""","9.15"" x 21.64""","5,000","2.2""","12 + 12","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LR-15 W","1993","LATHES, CNC, 4-AXIS, W-SUB-SPINDLE",10711,"OSP-5020L","Good","Yes",,"1993 Okuma LR-15 W OSP-5020L","L21254S","0","Yes","17.72""","8.5"" x 23.62""","3,800","2.56""","10 / 8","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LT-25","1999","LATHES, CNC, 4-AXIS, W-SUB-SPINDLE",9795,"OSP-7000L","Good","Yes",,"1999 Okuma LT-25 OSP-7000L","L21254S","0","Yes","19.67""","10.24"" x 22.05""","3,500","2.75""","24","Swing","Travels","RPM","Bar Cap.","Stations"
"Gildemeister","Twin 65","2005","LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE",10923,"Siemens 840D","Very Good","Yes","d","2005 Gildemeister Twin 65 Siemens 840D","L21256MS","0","Yes","5.71""","8.66"" x 12.60""","5,600","2.56""","36","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","MacTurn 350-BBW 2S / 1500","2005","LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE",10866,"OSP-E100L","Good","Yes",,"2005 Okuma MacTurn 350-BBW 2S / 1500 OSP-E100L","L21256MS","0","Yes","21.65""","19.88"" x 65.75""","5,000","2.5""","84 ATC","Swing","Travels","RPM","Bar Cap.","Stations"
"Superior","Force 4000","2004","SAWS, SLAB",11138,,"Very Good","Yes",,"2004 Superior Force 4000 ","S1298","-1","Yes","144"" x 84""","21.25""","25","90°",,"Length x Width","Blade Diameter","Motor","Miter",
"Haas","TR-310 5XB","2007","TABLES, NC and CNC",11603,,"Excellent","Yes",,"2007 Haas TR-310 5XB ","T0130","0","Yes","12.2""","360,000°","120°",,,"Table","Indexing","Tilt",,
"Haas","HRT-310","2006","TABLES, NC and CNC",11109,,"Good","No",,"2006 Haas HRT-310 ","T0130","0","Yes","12.2""","360,000°","0°",,,"Table","Indexing","Tilt",,
"Haas","HRT-310","1999","TABLES, NC and CNC",11580,,"Good","Yes","12.2"" Round Table, Indexing 360,000°, Brush Servo","1999 Haas HRT-310 ","T0130","-1","Yes","12.2""","360,000°","0°",,,"Table","Indexing","Tilt",,
"Nikken","CNC 250FA-M",,"TABLES, NC and CNC",11716,,"Good","Yes",," Nikken CNC 250FA-M ","T0130","-1","Yes","12""","360,000°",,,,"Table","Indexing","Tilt",,
"Ohio","72""","1968","TABLES, NC and CNC",7101,,"Very Good","Yes","Table Size (T-Slotted) - 72"", 360,000°, Full Brake, Shot Pins at 90°","1968 Ohio 72"" ","T0130","-1","Yes","72""","360,000°","0°",,,"Table","Indexing","Tilt",,
"Giddings and Lewis","60"" x 60"" Rotary Table",,"TABLES, ROTARY",11302,,"Good","No",," Giddings and Lewis 60"" x 60"" Rotary Table ","T0140","0","Yes","60"" x 60""","1°","Manual","20,000",,"Table","Indexing","Type","Weight Cap.",
"Giddings and Lewis","48""",,"TABLES, ROTARY",7596,,"Good","Yes",," Giddings and Lewis 48"" ","T0140","0","Yes","48""","1/2°","Manual","27,000 Lbs",,"Table","Indexing","Type","Weight Cap.",
"Pratt and Whitney","50"" Table",,"TABLES, ROTARY",11306,,"Very Good","Yes",," Pratt and Whitney 50"" Table ","T0140","0","Yes","50"" Round","1°","Electric","5,000",,"Table","Indexing","Type","Weight Cap.",
"Precitech Precision","FMS 8150","2002","TESTERS, ROUNDNESS",8328,,"Very Good","Yes",,"2002 Precitech Precision FMS 8150 ","T2300","-1","Yes","Gantry","16"" x 17""",,,,"Machine Style","Max. Work Area","Max. Work Surface",,
"Reed","A22 B","1979","THREAD ROLLERS",11557,,"Good","Yes",,"1979 Reed A22 B ","T2520","0","Yes","2.625""","1.5""","642""",,,"Work Diameter","Thread Length","Die Speeds","Teeth Per Inch","Roll Pressure"
"Reed","A22",,"THREAD ROLLERS",11525,,"Good","Yes",," Reed A22 ","T2520","-1","Yes","2.625""","1.5""","642""",,,"Work Diameter","Thread Length","Die Speeds","Teeth Per Inch","Roll Pressure"
"Almco","OR-10","1987","VIBRATORS (Incl. Vibratory Finishers)",9818,,"Very Good","Yes",,"1987 Almco OR-10 ","V2753","-1","Yes","9","48""",,"28""","7.5","Cubic Feet","Tub","Load","Max. Part","HP"
"Sweco","FC-70","1977","VIBRATORS (Incl. Vibratory Finishers)",7105,,"Good","Yes","Bowl Capacity - 70 Cubic Feet, Barrel Diameter - 92"", 20 HP, Internal Separation / Automatic Unloading, Polyurethane Lined Bowl, Additional 10"" Collar Added to the Top","1977 Sweco FC-70 ","V2753","-1","Yes","70","92""",,,"20","Cubic Feet","Tub","Load","Max. Part","HP"
"Esab","Precision Hydrocut LR","1999","WATER JET CUTTING, CNC",11305,"Esab","Good","Yes","108"" x 240"" Table, 250"" x 100"" x 20"" Tavels, 50 HP 50,000 PSI Jet Edge Pump, Floor Mounted Rail Gantry","1999 Esab Precision Hydrocut LR Esab","W0760","-1","Yes","108"" x 240""","20,000 Lbs","250"" x 100"" x 20""","50","50,000","Table","Table Load","Travels","HP","PSI"
"Okamoto","PSG-125","1980","GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ.",11167,,"Good",,"24"" x 16"" Chuck, 37.5"" x 17.5"" Travels, 3 HP, Hydraulic Over The Wheel Dresser, Incremental Downfeed, Walker Fine Line Chuck, Many Extras","1980 Okamoto PSG-125 ","G8025","0","Yes","48"" x 20""","20""","51.22"" x 20.86""","18""","15","Table","U/W","Travels","Grind Wheel","HP"
"Okamoto","ACC-124 DX","1989","GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ.",11166,,"Good","Yes",,"1989 Okamoto ACC-124 DX ","G8025","0","Yes","24"" x 12""","13.6""","29.5"" x 13.5""","12""","5","Table","U/W","Travels","Grind Wheel","HP"
"Okamoto","ACC-3280 DX","2000","GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ.",11094,"Okamoto","Very Good","Yes",,"2000 Okamoto ACC-3280 DX Okamoto","G8025","0","Yes","80"" x 32""","27.5""","89"" x 34""","20""","20","Table","U/W","Travels","Grind Wheel","HP"
"Sharp","820-3A","2004","GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ.",11724,,"Very Good","Yes",,"2004 Sharp 820-3A ","G8025","0","Yes","21"" x 8""","13""","22.6"" x 9""","8""","2","Table","U/W","Travels","Grind Wheel","HP"
"Blanchard","20K-36","1954","GRINDERS, SURFACE, ROTARY TYPE, VERT. SPDL",9937,,"Good","Yes","36"" Chuck, 38"" Swing, 12 Under Wheel, 20"" Grinding Wheel, 36"" Neutrifier Magnetic Chuck Control, Coolant System, Splash Guards","1954 Blanchard 20K-36 ","G8100","-1","Yes","36""","38""","12""","20""","30","Table","Swing","U/W","Grind Wheel","HP"
"Anca","TG-4 Fastgrind","1994","GRINDERS, TOOL and CUTTER, NC-CNC",8164,"Anca Series 2000","Good","Yes","Max. Swing 3.15"", Max. Length 15.86"", 5,167 Spindle, Anca Series 2000 Control, Paper Coolant Filtration System, RS-232 Port, One (1) 50 Taper Holder with 1/8 - 1"" Collets, Two (2) Wheel Arbors, Operating Only With Oil, High End Production End Mill Software (all end mills, conical taper, wordriff)","1994 Anca TG-4 Fastgrind Anca Series 2000","G8507","-1","Yes","3.15""","15.86""","15.86"" x 7.91"" x 5.86""","5,167","4.4","Dia.","Length","Travels","RPM","HP"
"Anca","RG-7","1998","GRINDERS, TOOL and CUTTER, NC-CNC",8841,"Anca System 32","Very Good","Yes","Min. - Max. Tool Dia. / Length - .079 - 6"" / 13"", Travels - 13.386"" x 9.449"" x 9.449"" x 9.449"", A-Axis Length / Rotation / Taper - 5.9"" / 360° / ISO 50, Hoffman 600 CFM Mist Collector, PROjection Fluting, Large Selection of Tooling Including Mandrels, Collets, Wheels, Etc, Step Tool Package, Many Other Options, Machine Rebuilt by Anca in 2004, Not Used Since","1998 Anca RG-7 Anca System 32","G8507","-1","Yes","6""","13""","13.38"" x 9.45"" x 9.45","10,000","8","Dia.","Length","Travels","RPM","HP"
"Anca","RGX","1999","GRINDERS, TOOL and CUTTER, NC-CNC",10159,"Anca 3DX-NT","Very Good","Yes","Max. Tool Dia. / Length - 9.8"" / 6"", Travels - 15"" x 15.4"" x 15.4"" x 9.449"", A-Axis Length / Rotation / Taper - 5.9"" / 180° / ISO 30, C-Axis - +/- 270°, 20,000 RPM, 11 HP, Color Monitor with Graphics, Ethernet Port, Dual Bi-Directional Spindles, Very Large Software Package, Forty (40) Tool Auto Loader, Approximately One Hundred Seventy Five (175) Collets For Auto Loader","1999 Anca RGX Anca 3DX-NT","G8507","0","Yes","9.8""","6""","15"" x 15.4"" x 15.4""","20,000","11","Dia.","Length","Travels","RPM","HP"
"Walter","Power Production","1997","GRINDERS, TOOL and CUTTER, NC-CNC",7711,"Walter HMC 400","Good","Yes","Maximum Tool Diameter / Length - 12.59"" / 14.46"", Walter HMC 400 Control, Windows DOS Packages 1, Two (2) Wheel Arbors, Operating Only With Oil, Fire Supression Equipment","1997 Walter Power Production Walter HMC 400","G8507","-1","Yes","12.59""","12.59""","19.68"" x 12.5"" x 25.98""","7,000","12","Dia.","Length","Travels","RPM","HP"
"Peddinghaus","210 Super 13",,"IRONWORKERS",9765,,"Very Good","Yes",," Peddinghaus 210 Super 13 ","P8915","-1","Yes","65","1 1/16""","8"" x 1/2""","1 5/8""","5","Tons","Punch","Shear","Bar","HP"
"Froriep","10KZ300","1968","BORING MILLS, VERTICAL and VTL, CNC and NC",8140,"Allen Bradley 550","Good","Yes",,"1968 Froriep 10KZ300 Allen Bradley 550","B6200","0","Yes","120""","132""","72""","56","70","Table","Swing","U/R","RPM","HP"
"Giddings and Lewis","48""","1998","BORING MILLS, VERTICAL and VTL, CNC and NC",11729,"Fanuc 21iT","Very Good","Yes",,"1998 Giddings and Lewis 48"" Fanuc 21iT","B6200","0","Yes","48""","53""","48""","400","50","Table","Swing","U/R","RPM","HP"
"Giddings and Lewis","54""","1980/2003","BORING MILLS, VERTICAL and VTL, CNC and NC",11340,"Fanuc 21iTB","Good","Yes",,"1980/2003 Giddings and Lewis 54"" Fanuc 21iTB","B6200","0","Yes","54""","60""","45""","333","60","Table","Swing","U/R","RPM","HP"
"King","56""","1953/1990","BORING MILLS, VERTICAL and VTL, CNC and NC",9902,"Centroid T 400","Very Good","Yes","56"" Table, 64"" Swing, 42"" UR, 100 RPM, 50 HP, 56"" 4-Jaw Chuck, One Overhead Loading Winch, Set of Four (4) Table Jaws, Roll Around Control, Coolant System, Power Indexing Turret, Centroid T-400 Conversational Control Same As GE Fanuc","1953/1990 King 56"" Centroid T 400","B6200","0","Yes","56""","62""","42""","100","50","Table","Swing","U/R","RPM","HP"
"O-M Ltd.","VT-5 12N","1982","BORING MILLS, VERTICAL and VTL, CNC and NC",11715,"Fanuc 6TB",,"Yes",,"1982 O-M Ltd. VT-5 12N Fanuc 6TB","B6200","-1",,"49 1/4""","59""","49 1/4""","300","50","Table","Swing","U/R","RPM","HP"
"Shibaura","TSS 30/55","1985/2011","BORING MILLS, VERTICAL and VTL, CNC and NC",11395,"Fanuc 16T","Rebuilt","Yes",,"1985/2011 Shibaura TSS 30/55 Fanuc 16T","B6200","0","Yes","118""","118"" / 216.5""","102""","80","50","Table","Swing","U/R","RPM","HP"
"Summit","48""",,"BORING MILLS, VERTICAL and VTL, CNC and NC",11555,"Fanuc OT","Very Good","Yes",," Summit 48"" Fanuc OT","B6200","0","Yes","48""","55""","50""","260","50","Table","Swing","U/R","RPM","HP"
"Summit","60""","1986","BORING MILLS, VERTICAL and VTL, CNC and NC",11660,"Fanuc OT","Good","Yes",,"1986 Summit 60"" Fanuc OT","B6200","0","Yes","60""","78""","58""","250","50","Table","Swing","U/R","RPM","HP"
"Summit","60""","1986","BORING MILLS, VERTICAL and VTL, CNC and NC",11660,"Fanuc OT","Good","Yes",,"1986 Summit 60"" Fanuc OT","B6200","0","Yes","60""","78""","58""","250","50","Table","Swing","U/R","RPM","HP"
"Summit","48""",,"BORING MILLS, VERTICAL and VTL, CNC and NC",11555,"Fanuc OT","Very Good","Yes",," Summit 48"" Fanuc OT","B6200","0","Yes","48""","55""","50""","260","50","Table","Swing","U/R","RPM","HP"
"Amera-Seiki","VT-1600 ATC","2011","BORING MILLS, VERTICAL and VTL, CNC W-ATC",11055,"Fanuc 18iTB","New","Yes",,"2011 Amera-Seiki VT-1600 ATC Fanuc 18iTB","B6200A","-1","Yes","63""","78.74""","78.74""","256""","100","Table","Swing","U/R","RPM","HP"
"Amera-Seiki","VT-2000 MC","2011","BORING MILLS, VERTICAL and VTL, CNC W-ATC",10635,"Fanuc 18iTB","New","No",,"2011 Amera-Seiki VT-2000 MC Fanuc 18iTB","B6200A","-1","Yes","78.74""","98.43""","69""","200","100","Table","Swing","U/R","RPM","HP"
"Bullard","52"" Dyn-Au-Tape","1980/2006","BORING MILLS, VERTICAL and VTL, CNC W-ATC",11217,"Fanuc 18iT","Good","Yes",,"1980/2006 Bullard 52"" Dyn-Au-Tape Fanuc 18iT","B6200A","0","Yes","52""","58""","44""","33","60","Table","Swing","U/R","RPM","HP"
"Bullard","86""","2007","BORING MILLS, VERTICAL and VTL, CNC W-ATC",10716,"Fanuc 18iT","Excellent","Yes",,"2007 Bullard 86"" Fanuc 18iT","B6200A","-1","Yes","86""","98""","92""","130","100","Table","Swing","U/R","RPM","HP"
"Doosan","Puma V-550","1999","BORING MILLS, VERTICAL and VTL, CNC W-ATC",11060,"Fanuc 18T","Good","Yes",,"1999 Doosan Puma V-550 Fanuc 18T","B6200A","0","Yes","30.31""","15.4"" x 31""","2,000","1.75""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Doosan","Puma-V550M","2004","BORING MILLS, VERTICAL and VTL, CNC W-ATC",11136,"Fanuc 21iTB","Very Good","Yes",,"2004 Doosan Puma-V550M Fanuc 21iTB","B6200A","0","Yes","31.5""","15.4"" x 31""","2,000","1.75""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Giddings and Lewis","VTC-1600","2008","BORING MILLS, VERTICAL and VTL, CNC W-ATC",11362,"Siemens 840D","Excellent","Yes",,"2008 Giddings and Lewis VTC-1600 Siemens 840D","B6200A","0","Yes","62.99""","78.74""","98.42""","400","100","Table","Swing","U/R","RPM","HP"
"Giddings and Lewis","Series 512","1991","BORING MILLS, VERTICAL and VTL, CNC W-ATC",10583,"Giddings & Lewis 8000","Good","Yes",,"1991 Giddings and Lewis Series 512 Giddings & Lewis 8000","B6200A","0","Yes","48""","58""","42""","483","75","Table","Swing","U/R","RPM","HP"
"Gray","VFR","1988","BORING MILLS, VERTICAL and VTL, CNC W-ATC",11682,"Gemini D17","Good","Yes",,"1988 Gray VFR Gemini D17","B6200A","0","Yes","32""","50""","40","550","75","Table","Swing","U/R","RPM","HP"
"HNK","VTC-30/40E","2001","BORING MILLS, VERTICAL and VTL, CNC W-ATC",11361,"Fanuc 18iT","Very Good","Yes",,"2001 HNK VTC-30/40E Fanuc 18iT","B6200A","0","Yes","118.12""","157""","86.6","80","100","Table","Swing","U/R","RPM","HP"
"Ikegai","VT-1100","1981","BORING MILLS, VERTICAL and VTL, CNC W-ATC",11533,"Fanuc 6TB","Good","Yes",,"1981 Ikegai VT-1100 Fanuc 6TB","B6200A","0","Yes","49 1/2""","51 1/8""","50""","280","50","Table","Swing","U/R","RPM","HP"
"Monarch","VLN14","1996","BORING MILLS, VERTICAL and VTL, CNC W-ATC",11139,"Fanuc 15TTA","Very Good","Yes",,"1996 Monarch VLN14 Fanuc 15TTA","B6200A","0","Yes","57""","67""","66.1","235","75","Table","Swing","U/R","RPM","HP"
"Motch","125 TS","2001","BORING MILLS, VERTICAL and VTL, CNC W-ATC",11727,"Fanuc 21iT","Very Good","Yes",,"2001 Motch 125 TS Fanuc 21iT","B6200A","0","Yes","24""","25""","22""","2,410","47","Table","Swing","U/R","RPM","HP"
"O-M Ltd.","Omega 50","2002","BORING MILLS, VERTICAL and VTL, CNC W-ATC",11357,"Fanuc 18iM","Good","Yes",,"2002 O-M Ltd. Omega 50 Fanuc 18iM","B6200A","0","Yes","36""","49.21""","31.49""","800","50","Table","Swing","U/R","RPM","HP"
"O-M Ltd.","TDC-12N","1986","BORING MILLS, VERTICAL and VTL, CNC W-ATC",8883,"Fanuc 11T","Very Good","Yes",,"1986 O-M Ltd. TDC-12N Fanuc 11T","B6200A","0","Yes","49.25""","63""","39.37""","350","50","Table","Swing","U/R","RPM","HP"
"Schiess","16DS-125","1981","BORING MILLS, VERTICAL and VTL, CNC W-ATC",10546,"Fanuc 8T","Good","Yes",,"1981 Schiess 16DS-125 Fanuc 8T","B6200A","0","Yes","49.21""","62.99""","49.21""","315","40","Table","Swing","U/R","RPM","HP"
"Toshiba","TUE-15","2001","BORING MILLS, VERTICAL and VTL, CNC W-ATC",10913,"Fanuc 18T","Very Good","Yes",,"2001 Toshiba TUE-15 Fanuc 18T","B6200A","0","Yes","59""","70.86""","67.75""","250","50","Table","Swing","U/R","RPM","HP"
"Toshiba","TMC-13","1985/2011","BORING MILLS, VERTICAL and VTL, CNC W-ATC",11017,"Fanuc 32Ti","Rebuilt","Yes",,"1985/2011 Toshiba TMC-13 Fanuc 32Ti","B6200A","0","Yes","49.2""","63""","52""","200","60","Table","Swing","U/R","RPM","HP"
"Toshiba","TUE-20","2005","BORING MILLS, VERTICAL and VTL, CNC W-ATC",10423,"Fanuc 18M","Very Good","Yes",,"2005 Toshiba TUE-20 Fanuc 18M","B6200A","0","Yes","78.7""","90.5""","67.7""","200","60","Table","Swing","U/R","RPM","HP"
"Toshiba","TMC-16","1982/2011","BORING MILLS, VERTICAL and VTL, CNC W-ATC",11392,"Fanuc 18T","Rebuilt","Yes",,"1982/2011 Toshiba TMC-16 Fanuc 18T","B6200A","0","Yes","71""","78.7""","63""","250","73""","Table","Swing","U/R","RPM","HP"
"Vanguard","TAC-16A","2007","BORING MILLS, VERTICAL and VTL, CNC W-ATC",11072,"Fanuc Oi","Excellent","Yes",,"2007 Vanguard TAC-16A Fanuc Oi","B6200A","0","Yes","63""","78.74""","68""","254""","60","Table","Swing","U/R","RPM","HP"
"Toshiba","TMD-16 APC","1996","BORING MILLS, VERTICAL and VTL, CNC W-MILLING and ATC",11363,"Fanuc 15TA","Very Good","Yes",,"1996 Toshiba TMD-16 APC Fanuc 15TA","B6175A","0","Yes","63""","78.7""","53.14""","280","60","Table","Swing","U/R","RPM","HP"
"Pacific","750-18","1969","BRAKES, PRESS, HYDRAULIC",10865,,"Very Good","Yes","750 Tons, 18' Bed, 16' Between Housings, Autogauge Model G24 Multi Axis Back Gauge","1969 Pacific 750-18 ","B7015","-1","Yes","750","18'","12""","14""","55","Ton","Bed","Stoke","Throat","HP"
"Pacific","200-10","1966","BRAKES, PRESS, HYDRAULIC",7099,,"Good","Yes","200 Tons, 10' Bed, 8' 4"" Between Housings, 7.5"" Stroke, 25 HP, Hurco AutoBend 5 Back Gauge","1966 Pacific 200-10 ","B7015","-1","Yes","200","10'","7.5""","10""","25","Ton","Bed","Stoke","Throat","HP"
"Verson","H-400-10","1996","BRAKES, PRESS, HYDRAULIC",10780,,"Good","Yes",,"1996 Verson H-400-10 ","B7015","-1","Yes","400","10'","12""","19""","40","Ton","Bed","Stoke","Throat","HP"
"Wysong","PH-6096","1996","BRAKES, PRESS, HYDRAULIC",9134,"Wysong GC 6000","Very Good","Yes","60 Tons, 1/4"" Mild Steel Capacity, 8' Bed, 104"" Between housings, 6"" Stroke, 15"" Open Height, 300 IPM Approach, 22 IPM Working, 225 IPM Return, 15 HP, 24"" Two (2) Axis CNC Back Gauge, Operator Control Pedestal, Flush Mount Frame","1996 Wysong PH-6096 Wysong GC 6000","B7015","-1","Yes","60","96""","6""","10""","15","Ton","Bed","Stoke","Throat","HP"
"Dreis and Krump","1012-L",,"BRAKES, PRESS, MECHANICAL",10853,,"Very Good","Yes",," Dreis and Krump 1012-L ","B7020","-1","Yes","90","12'","3""","8""","25","Ton","Bed","Stoke","Throat","HP"
"Dreis and Krump","1012-L",,"BRAKES, PRESS, MECHANICAL",10852,,"Very Good","Yes",," Dreis and Krump 1012-L ","B7020","-1","Yes","90","12'","3""","8""","25","Ton","Bed","Stoke","Throat","HP"
"Hyde Guardian","HG-250","2000","COOLANT FILTERING SYSTEMS",10767,,"Very Good","Yes",,"2000 Hyde Guardian HG-250 ","C5761","-1","Yes","1,500 GPH","500",,,,"Flow Rate","Max PSI","Filtration","HP",
"ChipBlaster","CV-36","2001","COOLANT PUMP SYSTEM",11697,,"Good","No",,"2001 ChipBlaster CV-36 ","C5760","0","On Way","1,000 PSI","36 GPM","240 Gallons","30",,"Max. Presuure","Max. CFM","Tank Capacity","HP",
"Brown and Sharpe","Xcel 9159 DCC","1998","COORDINATE MEASURING MACHINES",10822,,"Very Good","Yes",,"1998 Brown and Sharpe Xcel 9159 DCC ","C5901","0","Yes","Gantry","35.4"" x 59.1"" x 33.5""","82.7"" x 35""","4,000",,"Style","Travels","Work Area","Work Load",
"Metris","LK 10.7.5","2008","COORDINATE MEASURING MACHINES",10821," LK MCC200","Excellent","Yes",,"2008 Metris LK 10.7.5 LK MCC200","C5901","0","Yes","Gantry","39.37"" x 27.56"" x 19.69""","32"" x 28""","3,000",,"Style","Travels","Work Area","Work Load",
"Mitutoyo","FN-905","1987","COORDINATE MEASURING MACHINES",11556,,"Very Good","Yes",,"1987 Mitutoyo FN-905 ","C5901","-1","Yes","Gantry","36.22"" x 21.65""","36.22"" x 21.65"" x 24""","9,500",,"Style","Travels","Work Area","Work Load",
"Sheffield","RS 30","19??","COORDINATE MEASURING MACHINES",10931,,"Very Good","Yes",,"19?? Sheffield RS 30 ","C5901","-1","On Way","Gantry","40"" x 30"" x 25""","42"" x 32""","2,200",,"Style","Travels","Work Area","Work Load",
"Star","VNC-20","1984","AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL",9754,"Fanuc 3T",,"Yes",,"1984 Star VNC-20 Fanuc 3T","A8175MS","-1","On Way","3/4""","6""","7,500","5","18","Max. Dia.","Length","RPM","HP","Tools"
"Tsugami","BS-32C MKII","1999","AUTO SCREW MACHINES, SWISS, CNC-MILL and SUB SPDL",11250,"Fanuc LH1","Good","Yes","Work Diameter 0.315"" - 1.26"", 200 - 6,000 RPM, 7.37 HP Main 2.95 HP Sub, Barfeed, Live Tooling","1999 Tsugami BS-32C MKII Fanuc LH1","A8175MS","0","Yes","1.26""","9.84""","6,000","7.5","16 Tools","Max. Dia.","Length","RPM","HP","Tools"
"CNC Enhancement","Auto Bar 400","2001","BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL",11129,,"Very Good","No",,"2001 CNC Enhancement Auto Bar 400 ","B1120","0","Yes","4""","72""","1",,,"Max. Bar","Length","Tubes",,
"Haas","Servo Bar 300","2001","BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL",11229,,"Good","No","Bar Capacity 1/4"" to 3-1/8"", Maximum Bar Length 60"", Barfeed in Good Condition","2001 Haas Servo Bar 300 ","B1120","0","Yes","3 1/8""","60""","1",,,"Max. Bar","Length","Tubes",,
"Iemca","TAL-65","1999","BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL",10967,,"Good","No","Maximum Bar Capacity Round / Square / Hex - 2.56"" / 1.75"" / 2.18"", 12' Bar Length","1999 Iemca TAL-65 ","B1120","0","Yes","2 9/16""","12'","1",,,"Max. Bar","Length","Tubes",,
"LNS","Sprint 565","2007","BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL",11610,,"Excellent","Yes",,"2007 LNS Sprint 565 ","B1120","-1","Yes","2 5/8""","12' 6""","1",,,"Max. Bar","Length","Tubes",,
"LNS","Hydrobar HYS 6-45-5.2","1997","BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL",11131,,"Very Good","No",,"1997 LNS Hydrobar HYS 6-45-5.2 ","B1120","0","No","2""","12'","6",,,"Max. Bar","Length","Tubes",,
"LNS","Quick Load Servo S3","2008","BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL",11326,,"Very Good","No",,"2008 LNS Quick Load Servo S3 ","B1120","-1","Yes","4""","56""","1",,,"Max. Bar","Length","Tubes",,
"LNS","Quick Load Servo","1998","BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL",11327,,"Good","No",,"1998 LNS Quick Load Servo ","B1120","-1","Yes","2 1/2""","55""","1",,,"Max. Bar","Length","Tubes",,
"SMW","Space Saver 2000","1997","BAR LOADER-MAGAZINE TYPE, HYDRAULIC, PNEUMATIC and MECHANICAL",11146,,"Very Good","No","60"" x 1/4"" - 3 1/8"" Bar Capacity","1997 SMW Space Saver 2000 ","B1120","0","Yes","3 1/8""","60""","1",,,"Max. Bar","Length","Tubes",,
"Pines","#1","1981/2000","BENDERS, PIPE and TUBE",11588,,"Very Good","Yes",,"1981/2000 Pines #1 ","B1804","0","Yes","1"" O.D.",,,"7 1/2",,"Capacity","Max. Radius","Max. Length","HP",
"Nissan","Super Flex 3D","2001","BENDERS, PIPE and TUBE, CNC",11592,,"Excellent","Yes",,"2001 Nissan Super Flex 3D ","B1835","0","Yes",".75"" - 1.25"" x .06""",,"78.74""","7.5",,"Capacity","Max. Radius","Max. Length","HP",
"Cincinnati-Gilbert","J Series","1969","BORING MILLS, HORIZ, FLOOR TYPE",11015,,"Very Good","Yes",,"1969 Cincinnati-Gilbert J Series ","B5400","0","Yes","5 3/8""","50","1,000","30","240"" x 120""","Spindle","Taper","RPM","HP","Table"
"Mitsubishi","MAF-150RS","1981/2004","BORING MILLS, HORIZ, FLOOR TYPE CNC and NC",8082,"Fanuc 16M","Good","No",,"1981/2004 Mitsubishi MAF-150RS Fanuc 16M","B5420","0","Yes","5.9""","50","1,450","40","62.99"" x 62.99""","Spindle","Taper","RPM","HP","Table"
"Scharmann","WF-132","1964/2007","BORING MILLS, HORIZ, FLOOR TYPE CNC and NC",10089,"Heidenhain TNC-320","Excellent","Yes",,"1964/2007 Scharmann WF-132 Heidenhain TNC-320","B5420","-1","Yes","5 1/4""","50","1,000","60","300"" x 96""","Spindle","Taper","RPM","HP","Table"
"Ceruti","ABC-75",,"BORING MILLS, HORIZ, TABLE TYPE",11617,,"Very Good","Yes",," Ceruti ABC-75 ","B5500","-1","Yes","2.953""","#5 Morse Taper","1,500","10","39.7"" X 32.7""","Spindle","Taper","RPM","HP","Table"
"Giddings and Lewis","PMC-5","1969","BORING MILLS, HORIZ, TABLE TYPE",11684,,"Good","Yes",,"1969 Giddings and Lewis PMC-5 ","B5500","0","Yes","5""","50","1,120","25","96"" x 48""","Spindle","Taper","RPM","HP","Table"
"Giddings and Lewis","DA5-T5","1969","BORING MILLS, HORIZ, TABLE TYPE",8231,,"Good","Yes",,"1969 Giddings and Lewis DA5-T5 ","B5500","0","Yes","5""","6 MT","1,000","15","98"" x 48""","Spindle","Taper","RPM","HP","Table"
"Giddings and Lewis","340-T","1962","BORING MILLS, HORIZ, TABLE TYPE",7600,,"Good","Yes",,"1962 Giddings and Lewis 340-T ","B5500","0","No","4""","5 MT","600","25","48"" x 98""","Spindle","Taper","RPM","HP","Table"
"Ingersoll","7""","2000/2006","BORING MILLS, HORIZ, TABLE TYPE",11620,"Heidenhain 855","Good","Yes",,"2000/2006 Ingersoll 7"" Heidenhain 855","B5500","0","Yes","7""","50","918","60","144"" X 312""","Spindle","Taper","RPM","HP","Table"
"Lucas","542B-120","1967","BORING MILLS, HORIZ, TABLE TYPE",9443,,"Very Good","Yes",,"1967 Lucas 542B-120 ","B5500","0","Yes","5""","50","1,200","25","48"" x 122""","Spindle","Taper","RPM","HP","Table"
"Nomura","B-100WR","1982","BORING MILLS, HORIZ, TABLE TYPE",11338,,"Good","Yes",,"1982 Nomura B-100WR ","B5500","0","Yes","3.94""","50","1,200","20","63"" x 55""","Spindle","Taper","RPM","HP","Table"
"Skoda","W-160A","1963","BORING MILLS, HORIZ, TABLE TYPE",8236,,"Good","Yes",,"1963 Skoda W-160A ","B5500","0","Yes","6.29""","100 Metric","800","47.5","108.26"" x 78.74""","Spindle","Taper","RPM","HP","Table"
"Stanko","2B622",,"BORING MILLS, HORIZ, TABLE TYPE",10979,,"Very Good","Yes",," Stanko 2B622 ","B5500","-1","Yes","5""","50","2,500","40","49.21"" x 44""","Spindle","Taper","RPM","HP","Table"
"Tos","W-100","1974","BORING MILLS, HORIZ, TABLE TYPE",11689,,"Good","Yes",,"1974 Tos W-100 ","B5500","0","Yes","3.94""","50","1,120","20","55"" x 55""","Spindle","Taper","RPM","HP","Table"
"Cincinnati-Gilbert","5D","1992","BORING MILLS, HORIZ, TABLE TYPE CNC and NC",11040,"Fanuc 11M","Good","Yes",,"1992 Cincinnati-Gilbert 5D Fanuc 11M","B5751","0","Yes","5""","50","1,450","30","60"" x 120""","Spindle","Taper","RPM","HP","Table"
"DeVlieg","43K-72","1964","BORING MILLS, HORIZ, TABLE TYPE CNC and NC",11498,"Diatrol III","Good","Yes","4"" Spindle, 7.5 HP, 1,450 RPM, 50 Taper, 72"" x 48"" x 20"" x 20"" Travels, 40"" x 72"" Table, Diatrol III Two Axis Control","1964 DeVlieg 43K-72 Diatrol III","B5751","-1","Yes","4""","50","1,450","7 1/2","40"" x 72""","Spindle","Taper","RPM","HP","Table"
"DeVlieg","JMC-4360","1961/1984","BORING MILLS, HORIZ, TABLE TYPE CNC and NC",10140,"Centroid M 400","Good","Yes","4"" Spindle, 30 HP, 3,000 RPM, 50 Taper, 60"" x 48"" x 16"" x 14"" Travels, 48"" x 60"" Table, Centroid M 400, Remote Jog Handle, Steel Way Covers, Coolant Chiller, Probe System, Tapered and Straight Thread Milling, Coordinate System Rotation","1961/1984 DeVlieg JMC-4360 Centroid M 400","B5751","-1","Yes","4""","50","3,000","30","48"" x 60""","Spindle","Taper","RPM","HP","Table"
"Femco","WBMC-100R2","1996","BORING MILLS, HORIZ, TABLE TYPE CNC and NC",11522,"Fanuc 15M","Very Good","Yes",,"1996 Femco WBMC-100R2 Fanuc 15M","B5751","0","Yes","3.93""","50","1,300","25","57"" x 63""","Spindle","Taper","RPM","HP","Table"
"Giddings and Lewis","70-H5-T","1968/1998","BORING MILLS, HORIZ, TABLE TYPE CNC and NC",11075,"Heidenhain TNC-406","Good","Yes",,"1968/1998 Giddings and Lewis 70-H5-T Heidenhain TNC-406","B5751","0","Yes","5""","50","1,250","40","146"" X 60""","Spindle","Taper","RPM","HP","Table"
"Giddings and Lewis","PMC-5","1970/1990","BORING MILLS, HORIZ, TABLE TYPE CNC and NC",11102,"Giddings & Lewis 8000B","Very Good","Yes",,"1970/1990 Giddings and Lewis PMC-5 Giddings & Lewis 8000B","B5751","0","Yes","5""","50","1,120","25","120"" x 60","Spindle","Taper","RPM","HP","Table"
"Giddings and Lewis","PMC-50","1975/83","BORING MILLS, HORIZ, TABLE TYPE CNC and NC",11472,"Fanuc 6M","Very Good","Yes",,"1975/83 Giddings and Lewis PMC-50 Fanuc 6M","B5751","0","Yes","5""","50","1,120","40","122"" x 48""","Spindle","Taper","RPM","HP","Table"
"Giddings and Lewis","65 4"" JEB","1965","BORING MILLS, HORIZ, TABLE TYPE CNC and NC",10875,"G&L 400","Very Good","Yes",,"1965 Giddings and Lewis 65 4"" JEB G&L 400","B5751","0","Yes","4""","50","1,300","30","65"" x 38""","Spindle","Taper","RPM","HP","Table"
"Giddings and Lewis","PC-50","1981/2004","BORING MILLS, HORIZ, TABLE TYPE CNC and NC",11653,"MachineMate CNC","Excellent","Yes","5"" Spindle, 25 HP, 1,200 RPM, 50 Taper, 96"" x 72"" x 42"" x 36"" Travels, Power Draw Bar, Hardened Bed Ways, Giddings & Lewis Hydrostatic Rotary Table, New Baldor Spindle Drive","1981/2004 Giddings and Lewis PC-50 MachineMate CNC","B5751","0","Yes","5""","50","1,200","30","96"" x 60""","Spindle","Taper","RPM","HP","Table"
"Lucas","30T-99","1978/1994","BORING MILLS, HORIZ, TABLE TYPE CNC and NC",10993,"Fanuc OM","Very Good","Yes",,"1978/1994 Lucas 30T-99 Fanuc OM","B5751","0","Yes","5""","50","1,400","30","110"" x 60""","Spindle","Taper","RPM","HP","Table"
"Scharmann","FB-100","1972/1999","BORING MILLS, HORIZ, TABLE TYPE CNC and NC",11496,"Heidenhain TNC-426 CB","Good","Yes",,"1972/1999 Scharmann FB-100 Heidenhain TNC-426 CB","B5751","0","Yes","4""","50","1,050","20","51 1/2"" X 37 1/2""","Spindle","Taper","RPM","HP","Table"
"Union","BFT-130/6","1995","BORING MILLS, HORIZ, TABLE TYPE CNC and NC",10921,"Fanuc 16iM","Very Good","No",,"1995 Union BFT-130/6 Fanuc 16iM","B5751","0","Yes","5""","50","930","50","55.11"" x 62.99""","Spindle","Taper","RPM","HP","Table"
"Union","BFT-130","1985","BORING MILLS, HORIZ, TABLE TYPE CNC and NC",11452,"Heidenhain TNC-155","Very Good","Yes",,"1985 Union BFT-130 Heidenhain TNC-155","B5751","0","Yes","5""","50","1,000","40","79"" X 71""","Spindle","Taper","RPM","HP","Table"
"Union","BFT-110","1987/2000","BORING MILLS, HORIZ, TABLE TYPE CNC and NC",11470,"Heidenhain TNC-360","Good","Yes",,"1987/2000 Union BFT-110 Heidenhain TNC-360","B5751","0","Yes","5""","50","1,120","20","55"" x 49""","Spindle","Taper","RPM","HP","Table"
"Union","BFT-130/6","1995","BORING MILLS, HORIZ, TABLE TYPE CNC and NC",11469,"Fanuc 16iM","Very Good","No",,"1995 Union BFT-130/6 Fanuc 16iM","B5751","0","Yes","5""","50","1,131","50","55.11"" x 62.99""","Spindle","Taper","RPM","HP","Table"
"DeVlieg","JMC-550R-80","1986","BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC",11471,"GE 2000 MC","Good","Yes","5"" Bar, 30 HP, 50 Taper, 40 ATC, 50"" x 40"" Table, Full 4th Rotary, Dual Pallet Shuttle, Coolant Through Spindle, Spindle Orientation, Adaptive Control","1986 DeVlieg JMC-550R-80 GE 2000 MC","B5751A","0","Yes","5""","50","3,000","30","50"" x 40""","Spindle","Taper","RPM","HP","Table"
"Doosan","DBC-130L","2009","BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC",11705,"Fanuc 18iMB","Excellent","Yes",,"2009 Doosan DBC-130L Fanuc 18iMB","B5751A","0","Yes","5.12""","50","2,500","35","70.86"" x 78.96""","Spindle","Taper","RPM","HP","Table"
"Femco","BMC-110 R2","2008","BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC",11408,"Fanuc 21iMB","Excellent","Yes",,"2008 Femco BMC-110 R2 Fanuc 21iMB","B5751A","0","Yes","4.33""","50","2,500","35","62.99"" x 57.08""","Spindle","Taper","RPM","HP","Table"
"Giddings and Lewis","PC-50","1982","BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC",11662,"Giddings & Lewis 800","Good","Yes","5"" Spindle, 25 HP, 3,000 RPM, 50 Taper, 72"" x 60"" x 41"" x 36"" Travels, 40 ATC, Power Draw Bar, Ball Screws and Independent Drive","1982 Giddings and Lewis PC-50 Giddings & Lewis 800","B5751A","0","Yes","5""","72"" x 60"" x 41""","1,120","25","72"" x 48""","Spindle","Taper","RPM","HP","Table"
"Giddings and Lewis","MC-50","1988/1995","BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC",11719,"Giddings & Lewis 8000B","Good","Yes","5"" Spindle, 25 HP, 3,000 RPM, 50 Taper, 72"" x 54"" x 30"" x 50"" Travels, 120 ATC, Full 4th, Two (2) 36"" x 48"" Pallets, Outrigger Saddle Supports, Power Draw Bar, Hardened Bed Ways, Coolant Through Spindle, Dual Chip Conveyors, Remote Jog Handle","1988/1995 Giddings and Lewis MC-50 Giddings & Lewis 8000B","B5751A","0","Yes","5""","50","1,120","25","36"" x 48""","Spindle","Taper","RPM","HP","Table"
"Kuraki","KBT-11 WDXA","2001","BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC",11137,"Fanuc 16iM","Very Good","Yes",,"2001 Kuraki KBT-11 WDXA Fanuc 16iM","B5751A","0","Yes","4.33""","50","3,000","20","55.1"" x 62.9""","Spindle","Taper","RPM","HP","Table"
"Toshiba","BTD-13.FR22","2000","BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC",11372,"Tosnuc 888","Good","Yes",,"2000 Toshiba BTD-13.FR22 Tosnuc 888","B5751A","0","Yes","5.12""","50","2,500","30","70.8"" x 86.66""","Spindle","Taper","RPM","HP","Table"
"Union","KCX-130","2002","BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC",10586,"Heidenhain TNC-426","Very Good","Yes",,"2002 Union KCX-130 Heidenhain TNC-426","B5751A","0","Yes","5.11","50","6,000","60","100"" x 80""","Spindle","Taper","RPM","HP","Table"
"Union","CBFK-150","1998/2002","BORING MILLS, HORIZ, TABLE TYPE CNC W-ATC",11143,"Fanuc 16MA","New","Yes",,"1998/2002 Union CBFK-150 Fanuc 16MA","B5751A","0","Yes","6""","50","2,500","77","79"" x 63""","Spindle","Taper","RPM","HP","Table"
"Berthiez","BM-180","1974","BORING MILLS, VERTICAL and VTL",10926,,"Good","Yes",,"1974 Berthiez BM-180 ","B6006","0","Yes","72""","142""","60""","65","50","Table","Swing","U/R","RPM","HP"
"Bertram","100""",,"BORING MILLS, VERTICAL and VTL",10902,,"Good","Yes",," Bertram 100"" ","B6006","0","Yes","97""","102""","74""","37.5","40","Table","Swing","U/R","RPM","HP"
"Bertram","60""","1956","BORING MILLS, VERTICAL and VTL",7569,,"Good","Yes",,"1956 Bertram 60"" ","B6006","0","Yes","60""","64""","48""","75","30","Table","Swing","U/R","RPM","HP"
"Bullard","36"" Spiral Drive","1942","BORING MILLS, VERTICAL and VTL",11535,,"Very Good","Yes",,"1942 Bullard 36"" Spiral Drive ","B6006","0","Yes","36""","40""","26""","200","20","Table","Swing","U/R","RPM","HP"
"Bullard","52"" Dynatrol","1967","BORING MILLS, VERTICAL and VTL",5860,,"Good","Yes",,"1967 Bullard 52"" Dynatrol ","B6006","0","Yes","52""","58""","50 3/8""","250","50","Table","Swing","U/R","RPM","HP"
"Bullard","42"" Cutmaster","1954","BORING MILLS, VERTICAL and VTL",6223,,"Good","No",,"1954 Bullard 42"" Cutmaster ","B6006","-1","Yes","42""","54""","37""","150","30","Table","Swing","U/R","RPM","HP"
"Bullard","36"" Cutmaster","1943","BORING MILLS, VERTICAL and VTL",10914,,"Good","Yes",,"1943 Bullard 36"" Cutmaster ","B6006","0","Yes","36""","45""","30""","180","30","Table","Swing","U/R","RPM","HP"
"Bullard","36"" Cutmaster","1954","BORING MILLS, VERTICAL and VTL",10915,,"Good","Yes",,"1954 Bullard 36"" Cutmaster ","B6006","0","Yes","36""","45""","30""","180","25","Table","Swing","U/R","RPM","HP"
"Bullard","36"" Dynatrol","1967","BORING MILLS, VERTICAL and VTL",6549,,"Very Good","Yes",,"1967 Bullard 36"" Dynatrol ","B6006","0","Yes","36""","48""","54""","585","50","Table","Swing","U/R","RPM","HP"
"Bullard","74"" Cutmaster",,"BORING MILLS, VERTICAL and VTL",11685,,"Good","Yes",," Bullard 74"" Cutmaster ","B6006","0","Yes","74""","82""","60""","90","30","Table","Swing","U/R","RPM","HP"
"Bullard","36"" Dynatrol",,"BORING MILLS, VERTICAL and VTL",10809,,"Good","Yes",," Bullard 36"" Dynatrol ","B6006","0","Yes","36""","49""","42""","585","60","Table","Swing","U/R","RPM","HP"
"Bullard","42"" Spiral Drive","1942","BORING MILLS, VERTICAL and VTL",11536,,"Good","Yes",,"1942 Bullard 42"" Spiral Drive ","B6006","0","Yes","42""","50""","33""","100","25","Table","Swing","U/R","RPM","HP"
"Bullard","36"" Cutmaster","1951","BORING MILLS, VERTICAL and VTL",10661,,"Very Good","Yes",,"1951 Bullard 36"" Cutmaster ","B6006","0","Yes","36""","39""","30""","240","30","Table","Swing","U/R","RPM","HP"
"Bullard","86"" Dynatrol","1976","BORING MILLS, VERTICAL and VTL",10794,,"Very Good","Yes",,"1976 Bullard 86"" Dynatrol ","B6006","0","Yes","86""","98""","132""","120","75","Table","Swing","U/R","RPM","HP"
"Bullard","46"" Dynatrol","1966","BORING MILLS, VERTICAL and VTL",10190,,"Good","Yes",,"1966 Bullard 46"" Dynatrol ","B6006","0","Yes","46""","58""","54""","250","50","Table","Swing","U/R","RPM","HP"
"Bullard","36"" Cutmaster","1958","BORING MILLS, VERTICAL and VTL",8124,,"Very Good","Yes",,"1958 Bullard 36"" Cutmaster ","B6006","0","Yes","36""","45""","30""","180","30","Table","Swing","U/R","RPM","HP"
"Bullard","36"" Spiral Drive",,"BORING MILLS, VERTICAL and VTL",10874,,"Very Good","Yes",," Bullard 36"" Spiral Drive ","B6006","0","Yes","36""","39""","24""","200","20","Table","Swing","U/R","RPM","HP"
"Bullard","42"" Spiral Drive","1946","BORING MILLS, VERTICAL and VTL",8067,,"Good","Yes","42"" 4-Jaw Chuck, 45"" Swing - Side Up, 54"" Swing Side Down, 37"" Under Rail, 120 RPM, 30 HP, One (1) Five Sided Turret Head, One (1) Side Head","1946 Bullard 42"" Spiral Drive ","B6006","0","Yes","42""","54""","33""","120","30","Table","Swing","U/R","RPM","HP"
"Bullard","74"" Dynatrol",,"BORING MILLS, VERTICAL and VTL",10922,,"Very Good","Yes",," Bullard 74"" Dynatrol ","B6006","0","Yes","74""","86""","76""","210","100","Table","Swing","U/R","RPM","HP"
"Cincinnati","72"" Hypro","1952","BORING MILLS, VERTICAL and VTL",10804,,"Very Good","Yes",,"1952 Cincinnati 72"" Hypro ","B6006","0","Yes","72""","76""","50""","106","40","Table","Swing","U/R","RPM","HP"
"Cincinnati","92"" Hypro",,"BORING MILLS, VERTICAL and VTL",8388,,"Good","No","92"" 4-Jaw Chuck, 102"" Swing, 64"" Under Rail, 43 RPM, 40 HP, Two (2) Ram Head(s), One (1) Side Head, Pendant Controls, No Pit Required"," Cincinnati 92"" Hypro ","B6006","0","Yes","92""","102""","64""","43","40","Table","Swing","U/R","RPM","HP"
"Cincinnati","84"" Hypro",,"BORING MILLS, VERTICAL and VTL",9574,,"Good","No","84"" 4-Jaw Chuck, 89"" Swing, 70"" Under Rail, 70 RPM, 30 HP, Two (2) Swivel Type Ram Heads, Pendant Controls, Table Guarding, Power Rail Elevation, Anti-Friction Table Track, Coolant System, Floor Standing - No Pit Required"," Cincinnati 84"" Hypro ","B6006","0","Yes","84""","89""","70""","70","30","Table","Swing","U/R","RPM","HP"
"Craven","84""","1955","BORING MILLS, VERTICAL and VTL",11473,,"Good","Yes",,"1955 Craven 84"" ","B6006","0","Yes","84""","92""","74""","22.5","25","Table","Swing","U/R","RPM","HP"
"Froriep","KE-12","1977","BORING MILLS, VERTICAL and VTL",10805,,"Very Good","Yes",,"1977 Froriep KE-12 ","B6006","0","Yes","49""","57""","60.5""","300","50","Table","Swing","U/R","RPM","HP"
"Froriep","6KE 260/610-120","1970","BORING MILLS, VERTICAL and VTL",8200,,"Very Good","No",,"1970 Froriep 6KE 260/610-120 ","B6006","0","Yes","102""","240""","53","38","75","Table","Swing","U/R","RPM","HP"
"Giddings and Lewis","52"" Hypro","1947","BORING MILLS, VERTICAL and VTL",10916,,"Good","Yes",,"1947 Giddings and Lewis 52"" Hypro ","B6006","0","Yes","52""","57""","46""","72","40","Table","Swing","U/R","RPM","HP"
"Giddings and Lewis","72"" Hypro","1955","BORING MILLS, VERTICAL and VTL",11517,,"Good","No",,"1955 Giddings and Lewis 72"" Hypro ","B6006","0","Yes","72""","75","120","100","40","Table","Swing","U/R","RPM","HP"
"Giddings and Lewis","84"" Hypro","19??","BORING MILLS, VERTICAL and VTL",10824,,"Very Good","No",,"19?? Giddings and Lewis 84"" Hypro ","B6006","-1","Yes","84""","92""","84""","70","50","Table","Swing","U/R","RPM","HP"
"King","72""","1954","BORING MILLS, VERTICAL and VTL",11597,,"Very Good","Yes",,"1954 King 72"" ","B6006","0","Yes","72""","78""","74""","100","50","Table","Swing","U/R","RPM","HP"
"King","84""",,"BORING MILLS, VERTICAL and VTL",8390,,"Very Good","No",," King 84"" ","B6006","0","Yes","84""","90""","70""","55","40","Table","Swing","U/R","RPM","HP"
"Pensotti","KN-950","1968","BORING MILLS, VERTICAL and VTL",9103,,"Very Good","Yes","34"" 4-Jaw Chuck, 36"" Swing, 35.43"" Under Rail, 200 RPM, 25 HP, Turret Head, Side Head, Threading, Power Rapids, Floor Mount","1968 Pensotti KN-950 ","B6006","-1","Yes","33.9""","36""","35.433""","200","25","Table","Swing","U/R","RPM","HP"
"Schiess","KE-100","1976/95","BORING MILLS, VERTICAL and VTL",8277,,"Very Good","Yes",,"1976/95 Schiess KE-100 ","B6006","0","Yes","39""","45""","52""","310","25","Table","Swing","U/R","RPM","HP"
"Summit","SC-17 DC","1984","BORING MILLS, VERTICAL and VTL",11450,,"Very Good","Yes",,"1984 Summit SC-17 DC ","B6006","-1","Yes","57""","65""","62""","203","62","Table","Swing","U/R","RPM","HP"
"Summit","SCV-48","1991","BORING MILLS, VERTICAL and VTL",11626,,"Very Good","Yes",,"1991 Summit SCV-48 ","B6006","0","On Way","47""","55""","39.37""","252","74","Table","Swing","U/R","RPM","HP"
"Summit","59""","1975","BORING MILLS, VERTICAL and VTL",11445,,"Very Good","Yes",,"1975 Summit 59"" ","B6006","0","Yes","59""","70""","47.25""","165","40","Table","Swing","U/R","RPM","HP"
"Amera-Seiki","VT-600 MC","2008","BORING MILLS, VERTICAL and VTL, CNC and NC",10773,"Fanuc OiTC","Excellent","Yes",,"2008 Amera-Seiki VT-600 MC Fanuc OiTC","B6200","-1","Yes","24""","29.43""","23.62""","2,000","50","Table","Swing","U/R","RPM","HP"
"Bullard","36"" Dynatrol","1968/1994","BORING MILLS, VERTICAL and VTL, CNC and NC",9939,"Fanuc 16TT","Good","Yes","36"" 4-Jaw Manual Chuck, 39"" Maximum Swing Side Head Up, 46"" Maximum Swing Side Head Down, 30"" Under Rail, 468 RPM, Turret Head, Side Head, Pendant Control, Power Indexing Turret Head, Power Indexing Turret Side Head, Variable Rapid Traverse","1968/1994 Bullard 36"" Dynatrol Fanuc 16TT","B6200","-1","Yes","36""","46""","30""","500","50","Table","Swing","U/R","RPM","HP"
"Bullard","56""","1985/1997","BORING MILLS, VERTICAL and VTL, CNC and NC",11616,"GE 2000 MC","Good","Yes",,"1985/1997 Bullard 56"" GE 2000 MC","B6200","0","Yes","56""","62""","40""","200","50","Table","Swing","U/R","RPM","HP"
"Bullard","56""","1965/97","BORING MILLS, VERTICAL and VTL, CNC and NC",11501,"Fanuc OT","Very Good","Yes",,"1965/97 Bullard 56"" Fanuc OT","B6200","0","Yes","56""","68""","72""","200","60","Table","Swing","U/R","RPM","HP"
"Bullard","56"" Dynatrol","1968","BORING MILLS, VERTICAL and VTL, CNC and NC",11587,"Fanuc OT","Very Good","Yes",,"1968 Bullard 56"" Dynatrol Fanuc OT","B6200","0","Yes","56""","68""","48""","300","75","Table","Swing","U/R","RPM","HP"
"Doosan","VT-850 M","2006","BORING MILLS, VERTICAL and VTL, CNC and NC",11659,"Fanuc OiTB","Very Good","Yes",,"2006 Doosan VT-850 M Fanuc OiTB","B6200","0","Yes","24""","39.46""","33.3""","1,800","50","Table","Swing","U/R","RPM","HP"
"Brother","TC-221","1994","DRILLING and TAPPING MACHINES CNC",9981,"Brother CNC 400","Good","Yes",,"1994 Brother TC-221 Brother CNC 400","D3797","-1","Yes","23.6"" x 11.8""","16.5"" x 11.8"" x 9.8""","6,000","2","10","Table","Travels","RPM","HP","ATC"
"Brother","TC-S2A","2007","DRILLING and TAPPING MACHINES CNC",11091,"Brother CNC AOO","Excellent","Yes",,"2007 Brother TC-S2A Brother CNC AOO","D3797","0","Yes","31.5"" x 11.8"" /","18.9"" x 14.2"" x 10.6""","10,000","8.5","14","Table","Travels","RPM","HP","ATC"
"Brother","TC-324N","1998","DRILLING and TAPPING MACHINES CNC",11044,"Brother CNC 830","Very Good","Yes",,"1998 Brother TC-324N Brother CNC 830","D3797","0","Yes","33.1"" x 19.7""","16.5"" x 12.5"" x 10.2","10,000","6","14","Table","Travels","RPM","HP","ATC"
"Brother","TC-321","1995","DRILLING and TAPPING MACHINES CNC",11412,"Brother CNC 500","Needs Repair","No",,"1995 Brother TC-321 Brother CNC 500","D3797","-1","On Way","13"" x 12""","27.6"" x 11.8"" x 9.84""","6,000","5","10","Table","Travels","RPM","HP","ATC"
"Brother","TC-323","1996","DRILLING and TAPPING MACHINES CNC",11043,"Brother CNC","Good","Yes","11.81"" x 19.69"" Pallets, 16.5"" x 12.6"" x 10.2"" Travels, 10,000 RPM, 30 Taper, 6 HP, 10 ATC, Quick Table Two Surface Pallet Changer","1996 Brother TC-323 Brother CNC","D3797","0","Yes","11.81"" x 19.69""","16.54"" x 11.81"" x 9.84""","10,000","4.6","10","Table","Travels","RPM","HP","ATC"
"Brother","TC-32A","2001","DRILLING and TAPPING MACHINES CNC",10800,"Brother CNC AOO","Very Good","Yes",,"2001 Brother TC-32A Brother CNC AOO","D3797","0","Yes","21.65"" x 13.77""","17.71"" x 12.59"" x 16.14""","12,000","7.5","26","Table","Travels","RPM","HP","ATC"
"Enshu","DTCL APC","1995","DRILLING and TAPPING MACHINES CNC",10285,"Fanuc OM","Good","Yes",,"1995 Enshu DTCL APC Fanuc OM","D3797","-1","Yes","23"" x 11 3/4""","19.7"" x 15.7"" x 11.8""","10,000","7.4","16","Table","Travels","RPM","HP","ATC"
"Excel","SMT-350","2000","DRILLING and TAPPING MACHINES CNC",11481,"Fanuc 21MB","Good","Yes",,"2000 Excel SMT-350 Fanuc 21MB","D3797","-1","Yes","19.6"" x 10.2""","13.7"" x 9.8"" x 12.9""","15,000","5","20","Table","Travels","RPM","HP","ATC"
"Fanuc","Robodrill A-T14iBL","2001","DRILLING and TAPPING MACHINES CNC",10955,"Fanuc16iMA","Good","Yes",,"2001 Fanuc Robodrill A-T14iBL Fanuc16iMA","D3797","0","Yes","33.5"" x 17.5""","27.26"" x 15.75"" x 12.99""","8,000","7.5","14","Table","Travels","RPM","HP","ATC"
"Haas","MDC-500","2005","DRILLING and TAPPING MACHINES CNC",10479,"Haas 32 BIT","Very Good","Yes",,"2005 Haas MDC-500 Haas 32 BIT","D3797","0","Yes","20"" x 12.75""","20"" x 14"" x 20""","7,500","20","24","Table","Travels","RPM","HP","ATC"
"Haas","MDC-500","2004","DRILLING and TAPPING MACHINES CNC",11068,"Haas 32 BIT","Very Good","Yes",,"2004 Haas MDC-500 Haas 32 BIT","D3797","-1","Yes","20"" x 12.75""","20"" x 14"" x 20""","10,000","20","24","Table","Travels","RPM","HP","ATC"
"Hyundai","SPT-V30TD","1999","DRILLING and TAPPING MACHINES CNC",8435,"Yasnac J-50M","Very Good","Yes","Tables - 23.62"" x 17.7, Travels - 19.68"" x 11.81"" x 11.81"", 8,000 RPM, 7.5 HP, 14 ATC, Spindle Taper Air Blow, EIA / ISO, RS-232 Port Programming, Splash Guard","1999 Hyundai SPT-V30TD Yasnac J-50M","D3797","-1","Yes","23.62"" x 17.7""","19.68"" x 11.81"" x 11.81""","8,000","7.5","14","Table","Travels","RPM","HP","ATC"
"Natco",,"1981","DRILLS, H.D. and SENSITIVE, MULTI SPINDLE",9869,,"Good","No",,"1981 Natco ","D4803","-1","Yes","2 1/2""","16""",,"25","16","Max. Cap.","Stoke","RPM","HP","Spindles"
"Giddings and Lewis","Model 28","1967","DRILLS, HEAVY DUTY and SENSITIVE, SGL. VERT. SPDL.",10182,,"Good","Yes",,"1967 Giddings and Lewis Model 28 ","D4810","-1","Yes","14""",,"1,200","10","1","Max. Cap.","Stoke","RPM","HP","Spindles"
"American","Whole Wizard","1946","DRILLS, RADIAL",11206,,"Good","Yes",,"1946 American Whole Wizard ","D5700","-1","Yes","5'","15""","30"" x 24"" x 17""","1,200","1,200","Arm","Column","Table","RPM","HP"
"Carlton","4A","1954","DRILLS, RADIAL",9269,,"Very Good","Yes","6' Arm, 19"" Column, 72"" Under Spindle, 15 HP, 1,500 RPM, Power Clamping, Power Elevation, Box Table","1954 Carlton 4A ","D5700","-1","Yes","6'","19""","83"" x 50""","1,500","15","Arm","Column","Table","RPM","HP"
"Cegielski (Polamco)","GRV-554","1980","DRILLS, RADIAL",7552,,"Very Good","Yes","8' Arm, 18"" Column, 68.9"" Under Spindle, 20 HP, 1,600 RPM, Drilling Capacity Mild Steel 2.5"", Drilling Capacity Mild Cast 3.1"", Box Table, Power Clamping, Power Elevation","1980 Cegielski (Polamco) GRV-554 ","D5700","-1","Yes","8'","18""","94"" x 50""","1,600","20","Arm","Column","Table","RPM","HP"
"Giddings and Lewis","6' x 15""","1962","DRILLS, RADIAL",9938,,"Very Good","Yes","15"" Column, 6' Arm, 25 HP, # 6 Taper, Power Clamping to Arm and Head, Power Elevation of Arm, Power Rapid Head Traverse, Box Table","1962 Giddings and Lewis 6' x 15"" ","D5700","-1","Yes","6'","17""","83"" x 50""","1,500","25","Arm","Column","Table","RPM","HP"
"Agie","Mondo 2","1998","EDM - RAM, CNC",11224,"Agie Futura IV","Very Good","Yes",,"1998 Agie Mondo 2 Agie Futura IV","E2425","0","Yes","11.81"" x 15.75""","11.8"" x 15"" x 12""","28"" x 21"" x 14""","40 Amp",,"Table","Travel","Tank","Power","ATC"
"Agie","Mondo 2","1997","EDM - RAM, CNC",11207,"Agie Futura III","Very Good","Yes",,"1997 Agie Mondo 2 Agie Futura III","E2425","0","Yes","11.81"" x 15.75""","11.8"" x 15"" x 12""","28"" x 21"" x 14""","40 Amp",,"Table","Travel","Tank","Power","ATC"
"Charmilles","Roboform 35P","2006","EDM - RAM, CNC",11373,,"Like New","Yes",,"2006 Charmilles Roboform 35P ","E2425","-1","On Way","19.68"" x 15.76""","13.98"" x 9.8"" x 11.8""","99 Gallons","64",,"Table","Travel","Tank","Power","ATC"
"Hansvedt","MS- 4 3050 Foreman","1998","EDM - RAM, CNC",9767,,"Very Good","Yes",,"1998 Hansvedt MS- 4 3050 Foreman ","E2425","-1","Yes","15"" x 9""","12"" x 7"" x 8""","24"" x 11"" x 16""","30 / 50 Amp","6","Table","Travel","Tank","Power","ATC"
"Sodick","A3C","1986","EDM - RAM, CNC",9355,"Sodick Mark VII","Good","Yes",,"1986 Sodick A3C Sodick Mark VII","E2425","-1","Yes","30"" x 20""","12"" x 8"" x 10""","36"" x 16"" x 22""","40 Amp",,"Table","Travel","Tank","Power","ATC"
"Agie","Agicut 300C","1987","EDM - WIRE, CNC",10679,"Agiematic C","Very Good","Yes",,"1987 Agie Agicut 300C Agiematic C","E2475","-1","Yes","51.18"" x 47.24""","27.56"" x 15.75"" x 10.08""","65 Gallons",,,"Table","Travel","Tank","Power",
"Agie","Classic 2","2001","EDM - WIRE, CNC",10241,"Agievision 2","Excellent","Yes","Maximum Workpiece Size - 29.5"" x 21.6"" x 9.8"", Travels - 13.8"" x 9.8"" x 10.1"" x 2.8"" x 2.8"", AWT, Dial Arm and Indicator, Affinity Chiller, Manual Pulse Generator, Full Five Axis Control, High Speed Super Surface (HSSC) Generator, Wire Extraction and Chopping System, Alignment Device","2001 Agie Classic 2 Agievision 2","E2475","-1","Yes","31"" x 22""","13.7795"" x 9.8425"" x 10.07872""","45 Gallons",,,"Table","Travel","Tank","Power",
"Agie","Agitron 50","1991","EDM - WIRE, CNC",9749,"Agiematic D",,"Yes",,"1991 Agie Agitron 50 Agiematic D","E2475","-1","On Way","21 1/2"" x 17 1/2""","23"" x 19"" x 10""","317 Gallons","30 Amp",,"Table","Travel","Tank","Power",
"Leblond-Makino","Model EE3","1990","EDM - WIRE, CNC",10504,,"Good","Yes",,"1990 Leblond-Makino Model EE3 ","E2475","-1","Yes","19.5"" x 14.5""","14.2"" x 9.8"" x 9""","40 Gallons",,,"Table","Travel","Tank","Power",
"Mitsubishi","FX-10 K","1999","EDM - WIRE, CNC",10017,"Mitsubishi","Very Good","Yes",,"1999 Mitsubishi FX-10 K Mitsubishi","E2475","0","Yes","24.80"" x 20.86""","13.79"" x 9.84"" x 8.66""","105 Gallons","50 Amp",,"Table","Travel","Tank","Power",
"Timesaver","137-1HDMW","1994","GRINDERS, BELT",10501,,"Very Good","Yes","37"" Wide Belt, 36"" x 8"" Part Cap., 20 HP, Wet Base, Fully Equipped, Many Extra Grinding Belts","1994 Timesaver 137-1HDMW ","G3975","-1","Yes","37""","36""","8""","20","Wet","Conveyor Width","Max. Part Width","Max. Part Height","HP","Collector System"
"Ohmiya","Model OC 18","1988","GRINDERS, CENTERLESS",10924,,"Rebuilt","Yes",,"1988 Ohmiya Model OC 18 ","G4306","0","Yes","4""","4 3/4""","1,100","18"" x 12"" x 8.9""","10"" x 5.9"" x 4.37""","Cap.","Cap. Through","RPM","Grind Wheel","Reg. Wheel"
"Van Norman","Model 1C","19??","GRINDERS, CENTERLESS",10727,,"Fair","Yes",,"19?? Van Norman Model 1C ","G4306","-1","Yes","1.5""","4.75""","1,725","14"" x 4"" x 8""","8"" x 4"" x 3""","Cap.","Cap. Through","RPM","Grind Wheel","Reg. Wheel"
"Okuma","GA-44","1992","GRINDERS, CYLINDRICAL, NC and CNC",11052,"OSP-5020G","Good","No",,"1992 Okuma GA-44 OSP-5020G","G4601","-1","Yes","16.93""","39.37""","11.61"" x 42""","2,421","7.5","Max. Dia.","Length","Travels","RPM","HP"
"Okuma","GI-20N","199?","GRINDERS, CYLINDRICAL, NC and CNC",10851,"OSP-5020G",,"Yes",,"199? Okuma GI-20N OSP-5020G","G4601","-1","On Way","11.81","20""","7.874"" x 19.685""","50,000","7.3","Max. Dia.","Length","Travels","RPM","HP"
"Chevalier","Super 818","1995","GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ.",9961,,"Very Good","Yes",,"1995 Chevalier Super 818 ","G8025","-1","Yes","8"" x 18""","12""","18"" x 8""","8""","2","Table","U/W","Travels","Grind Wheel","HP"
"Chevalier","FSG-2060-TC",,"GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ.",11461,,"Very Good","Yes",," Chevalier FSG-2060-TC ","G8025","0","Yes","59"" x 19 5/8""","28 5/8""","60"" x 20""","20""","15","Table","U/W","Travels","Grind Wheel","HP"
"Harig","618 W","1988","GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ.",11722,"Bridgeport","Good","Ye","18"" x 6"" Walker Magnetic Chuck, 12"" Under Wheel, 19"" x 6 3/4"" Travels, 1 HP, 100 FPM, Wet Grinding Attachment With Pump and Tank, Bridgeport PC Based Programmble Control","1988 Harig 618 W Bridgeport","G8025","0","Yes","18"" x 6""","12""","19"" x 6 3/4""","6""","1","Table","U/W","Travels","Grind Wheel","HP"
"Harig","612 Super","1977","GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ.",9766,,"Very Good","Ye","12"" x 6"" Chuck, 13 1/2"" X Travel, 7"" Y Travel, 1 1/2 HP, 3,450 RPM, Power Longitudinal & Cross Feed, Coolant System, Walker Elector Magnetic Chuck, Fine Feed Adjust For Cross and Down Feed, New Crossfeed Screw","1977 Harig 612 Super ","G8025","-1","Yes","1","10""","13 1/2"" x 7""","7""","1 1/2","Table","U/W","Travels","Grind Wheel","HP"
"Mattison","16"" x 48""","1962","GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ.",11491,,"Good","No",,"1962 Mattison 16"" x 48"" ","G8025","-1","Yes","48"" x 16""","24""","16"" x 48""","20""","20","Table","U/W","Travels","Grind Wheel","HP"
"Okamoto","820A","1999","GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ.",9270,,"Very Good","Yes","18"" x 8"" Walker Magnetic Chuck, 18"" Under Wheel, 20"" x 8"" Travels, 1 1/3 HP, Two (2) Axis DRO, Fine Cross and Vertical Feeds, Power Elevation, External Coolant Pump and Tank","1999 Okamoto 820A ","G8025","-1","Yes","1","18""","23"" x 13""","8""","1 1/3","Table","U/W","Travels","Grind Wheel","HP"
"Okamoto","ACC-618 DX II","1995","GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ.",11723,,"Very Good","Yes","32"" x 16"" Chuck, 37.5"" x 17.5"" Travels, 3 HP, Hydraulic Over The Wheel Dresser, Incremental Downfeed, Walker Fine Line Chuck, Many Extras","1995 Okamoto ACC-618 DX II ","G8025","0","Yes","20"" x 6""","11.7""","20.9"" x 8""","8""","1","Table","U/W","Travels","Grind Wheel","HP"
"Okamoto","ACC-1224 DXNC","2004","GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ.",11223,,"Very Good","Yes",,"2004 Okamoto ACC-1224 DXNC ","G8025","0","Yes","24"" x 12""","13.6","29.5 x 13.5""","12""","5","Table","U/W","Travels","Grind Wheel","HP"
"Okamoto","ACC-52-ST","2006","GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ.",11112,,"Very Good","Yes",,"2006 Okamoto ACC-52-ST ","G8025","0","Yes","20"" x 8""","12.79""","25.59"" x 9.4""","8""","5","Table","U/W","Travels","Grind Wheel","HP"
"Okamoto","ACC-1632 DX III","2001","GRINDERS, SURFACE, RECIPROCATING TABLE, HORZ.",11690,,"Very Good","Yes","33.5"" x 15.75"" Chuck, 37.4"" x 17.3"" Travels, 5 HP, Auto Dresser and Compensation, Incremental Downfeed, Fully Automatic","2001 Okamoto ACC-1632 DX III ","G8025","0","Yes","33.5"" x 15.75""","21.5""","37.4"" x 17.3""","12""","5","Table","U/W","Travels","Grind Wheel","HP"
"Cincinnati","Maxim-500","1992","MACHINING CENTERS, HORIZONTAL CNC",11339,"Acramatic 950","Good","No","Two (2) 19.7"" x 19.7"" Pallets, 1° Indexing, 29.5"" x 29.5"" x 29.5"" Travels, 33.5 HP, 7,000 RPM, 50 Taper, 40 ATC, Chip Conveyor, Coolant Through Spindle, Color Graphics, Full Tool Library, High Speed DNC, RS-232 Port, Floppy Drive, Pallet Wash Down, Pallet Wash Down, Renishaw Receiver, Thousands of Dollars In Spare Parts, Two (2) Extra Pallets","1992 Cincinnati Maxim-500 Acramatic 950","M0130","-1","Yes","19.7"" x 19.7""","1°","7,000","50","40","Pallets","Indexing","RPM","Taper","ATC"
"Cincinnati","Maxim-630","1995","MACHINING CENTERS, HORIZONTAL CNC",11337,"Acramatic 950","Good","Yes",,"1995 Cincinnati Maxim-630 Acramatic 950","M0130","0","Yes","24.8"" x 24.8""","360,000°","10,000","50","40","Pallets","Indexing","RPM","Taper","ATC"
"Daewoo","Ace H-80","1997","MACHINING CENTERS, HORIZONTAL CNC",10633,"Fanuc 16M","Very Good","Yes",,"1997 Daewoo Ace H-80 Fanuc 16M","M0130","-1","Yes","31.5"" x 31.5""","360,000°","49.3"" x 39.4"" x 39.4""","50","60","Pallets","Indexing","RPM","Taper","ATC"
"Doosan","DHM-800","2007","MACHINING CENTERS, HORIZONTAL CNC",11475,"Fanuc 21iMB","Very Good","Yes",,"2007 Doosan DHM-800 Fanuc 21iMB","M0130","0","Yes","31.5"" x 31.5""","1°","6,000","50","60","Pallets","Indexing","RPM","Taper","ATC"
"Doosan","DHP-4000","2009","MACHINING CENTERS, HORIZONTAL CNC",11186,"Fanuc 18iMB","Excellent","Yes",,"2009 Doosan DHP-4000 Fanuc 18iMB","M0130","0","Yes","15.75"" x 15.75""","1°","14,000","40","262","Pallets","Indexing","RPM","Taper","ATC"
"Giddings and Lewis","HMC-170","2002","MACHINING CENTERS, HORIZONTAL CNC",11509,"Siemens 840D","Excellent","Yes",,"2002 Giddings and Lewis HMC-170 Siemens 840D","M0130","0","Yes","24.8"" x 49.2""","360,000°","10,000","50","50 x 2","Pallets","Indexing","RPM","Taper","ATC"
"Giddings and Lewis","Orion 2300","1996","MACHINING CENTERS, HORIZONTAL CNC",11354,"Giddings & Lewis 8000M","Good","Yes",,"1996 Giddings and Lewis Orion 2300 Giddings & Lewis 8000M","M0130","0","Yes","39.4"" x 39.4""","360,000°","14,000","50","140","Pallets","Indexing","RPM","Taper","ATC"
"Haas","HS-1RP","1999","MACHINING CENTERS, HORIZONTAL CNC",11212,"Haas 32 BIT","Good","Yes",,"1999 Haas HS-1RP Haas 32 BIT","M0130","0","Yes","15.7"" x 15.7""","360,000°","10,000","40","24","Pallets","Indexing","RPM","Taper","ATC"
"Haas","HS-1RP","1999","MACHINING CENTERS, HORIZONTAL CNC",11455,"Haas 32 BIT","Very Good","Yes",,"1999 Haas HS-1RP Haas 32 BIT","M0130","0","Yes","15.7"" x 15.7""","360,000°","7,500","40","24","Pallets","Indexing","RPM","Taper","ATC"
"Hitachi-Seiki","HC-630","1987","MACHINING CENTERS, HORIZONTAL CNC",10637,"Fanuc 11M","Needs Repair","Yes",,"1987 Hitachi-Seiki HC-630 Fanuc 11M","M0130","-1","Yes","24.8"" x 24.8""","1°","4,000","50","40","Pallets","Indexing","RPM","Taper","ATC"
"Hitachi-Seiki","HS-630","1999","MACHINING CENTERS, HORIZONTAL CNC",11530,"Seicos Sigma 16M","Very Good","Yes","Two 24.8"" Pallets, 360,000° Indexing, 2,640 Lbs Table Load, 33.5"" x 31.5"" x 33.5"" Travels, 10,000 RPM, 50 Taper, 40 HP, 60 ATC, Coolant Through Spindle, Synchronized Tapping, Helical Interpolation, Chip Conveyor, Remote Jog Handle","1999 Hitachi-Seiki HS-630 Seicos Sigma 16M","M0130","0","Yes","24.8"" x 24.8""","360,000°","10,000","50","60","Pallets","Indexing","RPM","Taper","ATC"
"Kia","H-63","2005","MACHINING CENTERS, HORIZONTAL CNC",11219,"Fanuc 18iMC","Very Good","Yes",,"2005 Kia H-63 Fanuc 18iMC","M0130","0","Yes","24.8"" x 24.8""","1°","8,000","50","60","Pallets","Indexing","RPM","Taper","ATC"
"Kitamura","H-400","1996","MACHINING CENTERS, HORIZONTAL CNC",10801,"Fanuc 15M","Very Good","Yes",,"1996 Kitamura H-400 Fanuc 15M","M0130","-1","Yes","15.7"" X 15.7""","360,000°","10,000","40","100","Pallets","Indexing","RPM","Taper","ATC"
"Kitamura","HX-400i","1999","MACHINING CENTERS, HORIZONTAL CNC",11541,"Fanuc 16iM","Good","Yes",,"1999 Kitamura HX-400i Fanuc 16iM","M0130","0","Yes","15.7"" x 15.7""","360,000°","13,000","40","50","Pallets","Indexing","RPM","Taper","ATC"
"Kitamura","HX-300","1999","MACHINING CENTERS, HORIZONTAL CNC",9518,"Fanuc 15M","Very Good","Yes","12"" x 12"" Pallets, Full 4th, 20.1"" x 20.1"" x 15.7"" Travels, 10,000 RPM, 20 HP, 40 Taper, 40 ATC, 512K Memory, Expanded Macros, Coolant Through Spindle, Geared Head, New Spindle March in 2003, 200 Tool Offsets, Expanded Work Offsets, Low Hours Cutting Aluminum and Plastic","1999 Kitamura HX-300 Fanuc 15M","M0130","-1","Yes","12"" x 12""","360,000°","10,000","40","40","Pallets","Indexing","RPM","Taper","ATC"
"Kiwa","KNH-426x","2005","MACHINING CENTERS, HORIZONTAL CNC",11315,"Fanuc 18iMB","Very Good","Yes",,"2005 Kiwa KNH-426x Fanuc 18iMB","M0130","0","Yes","15.7"" x 15.7""","360,000°","15,000","40","120","Pallets","Indexing","RPM","Taper","ATC"
"Leadwell","MCH-500D","1997","MACHINING CENTERS, HORIZONTAL CNC",10751,"Fanuc OMF","Good","Yes",,"1997 Leadwell MCH-500D Fanuc OMF","M0130","0","Yes","19.7"" x 19.7""","360,000°","4,000","50","60","Pallets","Indexing","RPM","Taper","ATC"
"Makino","A-55 Delta","1992","MACHINING CENTERS, HORIZONTAL CNC",10947,"Fanuc Pro 3","Good","Yes",,"1992 Makino A-55 Delta Fanuc Pro 3","M0130","0","Yes","15.74"" x 15.74""","360,000°","12,000","40","40","Pallets","Indexing","RPM","Taper","ATC"
"Makino","A-55","1998","MACHINING CENTERS, HORIZONTAL CNC",10944,"Fanuc Pro 3","Good","Yes",,"1998 Makino A-55 Fanuc Pro 3","M0130","0","Yes","15.74"" x 15.74""","360,000°","14,000","40","40","Pallets","Indexing","RPM","Taper","ATC"
"Makino","A-71","2003","MACHINING CENTERS, HORIZONTAL CNC",11437,"Fanuc Pro 3","Very Good","Yes",,"2003 Makino A-71 Fanuc Pro 3","M0130","0","Yes","19.7"" x 19.7""","1°","10,000","50","40","Pallets","Indexing","RPM","Taper","ATC"
"Makino","A-99","1998","MACHINING CENTERS, HORIZONTAL CNC",11042,"Fanuc Pro 3","Very Good","Yes",,"1998 Makino A-99 Fanuc Pro 3","M0130","0","Yes","31.5"" X 31.5""","1°","10,000","50","40","Pallets","Indexing","RPM","Taper","ATC"
"Makino","A-99","2001","MACHINING CENTERS, HORIZONTAL CNC",11041,"Fanuc 16i","Very Good","Yes",,"2001 Makino A-99 Fanuc 16i","M0130","0","Yes","31.5"" X 31.5""","360,000°","12,000","50","40","Pallets","Indexing","RPM","Taper","ATC"
"Mazak","H-400","1990","MACHINING CENTERS, HORIZONTAL CNC",11053,"Mazatrol M-32B","Good","Yes",,"1990 Mazak H-400 Mazatrol M-32B","M0130","-1","On Way","15.7"" x 15.7""","360,000°","10,000","40","100","Pallets","Indexing","RPM","Taper","ATC"
"Mazak","FH-4800","2000","MACHINING CENTERS, HORIZONTAL CNC",10757,"Mazatrol Fusion 640M","Very Good","Yes",,"2000 Mazak FH-4800 Mazatrol Fusion 640M","M0130","0","Yes","15.75"" x 15.75""","1°","25,000","40","80","Pallets","Indexing","RPM","Taper","ATC"
"Mazak","FH-480","1994","MACHINING CENTERS, HORIZONTAL CNC",11353,"Mazatrol M-32","Good","Yes",,"1994 Mazak FH-480 Mazatrol M-32","M0130","0","Yes","15.75"" x 15.75""","360,000°","15,000","40","60","Pallets","Indexing","RPM","Taper","ATC"
"Mazak","H-12","1993","MACHINING CENTERS, HORIZONTAL CNC",10856,"Fanuc 6M","Needs Work","Yes",,"1993 Mazak H-12 Fanuc 6M","M0130","-1","Yes","19.7"" x 19.7""","360,000°","5,000","40","60","Pallets","Indexing","RPM","Taper","ATC"
"Mitsubishi","M-H60E","1997","MACHINING CENTERS, HORIZONTAL CNC",11314,"Mitsubishi Meldas 520M","Good","Yes","24.8"" X 24.8"" Pallets, Full 4th, 39.4"" x 31.5"" x 31.5"" Travels, 6,000 RPM, 50 Taper, 20 HP, 80 ATC, Coolant Through Spindle, Chip Conveyor","1997 Mitsubishi M-H60E Mitsubishi Meldas 520M","M0130","0","Yes","24.8"" X 24.8""","360,000°","6,000","50","80","Pallets","Indexing","RPM","Taper","ATC"
"Mitsubishi","M-H4050","2004","MACHINING CENTERS, HORIZONTAL CNC",10667,"Fanuc 18iMB","Very Good","Yes",,"2004 Mitsubishi M-H4050 Fanuc 18iMB","M0130","-1","Yes","19.7"" x 19.7""","1°","14,000","40","60","Pallets","Indexing","RPM","Taper","ATC"
"Mitsubishi","M-H60D","1995","MACHINING CENTERS, HORIZONTAL CNC",11121,"Mitsubishi Meldas 330HMV","Good","Yes",,"1995 Mitsubishi M-H60D Mitsubishi Meldas 330HMV","M0130","0","Yes","24.75"" x 24.75""","360,000°","4,000","50","120","Pallets","Indexing","RPM","Taper","ATC"
"Mitsubishi","M-H80D","1994","MACHINING CENTERS, HORIZONTAL CNC",9980,"Mitsubishi 300","Good","Yes",,"1994 Mitsubishi M-H80D Mitsubishi 300","M0130","-1","Yes","31.5"" x 31.5""","360,000°","4,000","50","80","Pallets","Indexing","RPM","Taper","ATC"
"Mitsubishi","M-H4050","2006","MACHINING CENTERS, HORIZONTAL CNC",11056,"Fanuc 18iMB","Very Good","Yes",,"2006 Mitsubishi M-H4050 Fanuc 18iMB","M0130","0","Yes","19.7"" x 19.7""","360,000°","14,000","40","60","Pallets","Indexing","RPM","Taper","ATC"
"Scotchman","4014","2001","IRONWORKERS",10626,,"Excellent","No",,"2001 Scotchman 4014 ","P8915","-1","Yes","40","1""","6"" x 1/2""","2""","3","Tons","Punch","Shear","Bar","HP"
"Lockformer","PMX","2000","LASERS OR PLASMA",11612,,"Very Good","Yes",,"2000 Lockformer PMX ","L0850","0","Yes","60"" x 120""","1,900","120"" x 60""","3,000","1,000 IPM","Table","Table Load","Travels","Watts","Cut Rate"
"Mazak","Fabri Gear 150 3D","2005","LASERS OR PLASMA",11181,"Mazak","Very Good","Yes",,"2005 Mazak Fabri Gear 150 3D Mazak","L0850","0","Yes","312""",,"6"" x 6""","4,000",,"Table","Table Load","Travels","Watts","Cut Rate"
"Mazak","Space Gear 510 Mark II","2002","LASERS OR PLASMA",11071,"Fanuc L64","Very Good","Yes",,"2002 Mazak Space Gear 510 Mark II Fanuc L64","L0850","0","Yes","98"" x 49""","1,780 Lbs","131"" x 60.8"" x 16.5""","4,000","590 IPM","Table","Table Load","Travels","Watts","Cut Rate"
"Daewoo","Puma-V10","1996","LATHES, CNC, 2-AXIS, CHUCKER",9845,"Fanuc OT","Good","Yes",,"1996 Daewoo Puma-V10 Fanuc OT","L2125","-1","Yes","18.5""","15.4"" x 13""","3,600","1.75""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Daewoo","Puma-V300 G","2000","LATHES, CNC, 2-AXIS, CHUCKER",9894,,"Good","Yes",,"2000 Daewoo Puma-V300 G ","L2125","-1","Yes","18.5""","15.4"" x 13""","2,000","1.75""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Daewoo","Puma-V10","1996","LATHES, CNC, 2-AXIS, CHUCKER",9846,"Fanuc OT","Need Minor Repairs","Yes",,"1996 Daewoo Puma-V10 Fanuc OT","L2125","-1","Yes","18.5""","15.4"" x 13""","2,000","1.75""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Daewoo","Lynx-200A","2001","LATHES, CNC, 2-AXIS, CHUCKER",11034,"Meldas 64","Very Good","Yes",,"2001 Daewoo Lynx-200A Meldas 64","L2125","0","Yes","18.11""","6.3"" x 13""","5,000","1.5""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Dainichi","MC-95B X 200","1985","LATHES, CNC, 2-AXIS, CHUCKER",11313,"Fanuc 6TB","Good","Yes",,"1985 Dainichi MC-95B X 200 Fanuc 6TB","L2125","0","Yes","37.4""","24.8"" x 59""","750","9.375","6","Swing","Travels","RPM","Bar Cap.","Stations"
"Doosan","Lynx-220A","2007","LATHES, CNC, 2-AXIS, CHUCKER",10526,"Fanuc 0iTE","Very Good","Yes",,"2007 Doosan Lynx-220A Fanuc 0iTE","L2125","0","Yes","20.1""","6.3"" x 20.9""","6,000","1.75""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Doosan","Lynx-220A","2007","LATHES, CNC, 2-AXIS, CHUCKER",11287,"Fanuc 0iTC","Very Good","Yes",,"2007 Doosan Lynx-220A Fanuc 0iTC","L2125","0","Yes","20.08""","6.3"" x 20.9""","6,000","1.75""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Emco Maier","Emco Turn 340","1987","LATHES, CNC, 2-AXIS, CHUCKER",11711,"Siemens 810T","Good","Yes","13.38"" Swing, 6.22"" SOC, 9.13"" Turning Length, 6,000 RPM, 2.08"" Spindle Bore, 1.1875"" Bar Capacity, A2-5 Nose, 15 HP, 8 Station Turret, 8"" 3-Jaw Air Chuck, Mayfran Chip Conveyor, Tool Holders, Turret Rebuild Four (4) Years Ago","1987 Emco Maier Emco Turn 340 Siemens 810T","L2125","-1","Yes","13.38""","6.22"" x 11.8""","6,000","1.65""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Haas","SL-20","2005","LATHES, CNC, 2-AXIS, CHUCKER",11680,"Fanuc OTD","Good","Yes",,"2005 Haas SL-20 Fanuc OTD","L2125","0","Yes","20”","8.45"" x 20""","4,000","2""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Hardinge","Cobra-65","2000","LATHES, CNC, 2-AXIS, CHUCKER",7666,"Fanuc 21iT","Good","Yes",,"2000 Hardinge Cobra-65 Fanuc 21iT","L2125","0","Yes","21.3""","8.45"" x 20""","4,500","2.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Powermaster 1100","1980","LATHES, CNC, 2-AXIS, CHUCKER",10386,"Fanuc 5T","Good","Yes","33"" Swing, 37"" Swing In Gap, 16.5"" Length of Gap, 27"" Swing OCS, 25"" Turning Length, 1,200 RPM, 9.5"" Spindle Bore and Bar Capacity,, 60 HP, 8 Station Turret, 21"" x 29"" Travels, 24"" 3-Jaw Manual Chuck, Turret Tooling, Chip Conveyor, Tape Reader","1980 Mazak Powermaster 1100 Fanuc 5T","L2125","-1","Yes","33""","21"" x 29""","1,200","9.5""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","CL-200B","1998","LATHES, CNC, 2-AXIS, CHUCKER",11709,"MSC-803L","Very Good","Yes","Swing Over Bed 20.3"", Swing Over Saddle 9.5"", Maximum Turning Diameter 16.14"", Length 14.6"", 4,500 RPM, 15 HP, 10 Sta. Turret, Tailstock, Parts Catcher, 8"" 3-Jaw Chuck, Chip Conveyor, Iemca TAL 12' Bar Feed, Oil Mist Extraction Unit, Specialized 12’ Bar Carrier With Crane","1998 Mori-Seiki CL-200B MSC-803L","L2125","-1","Yes","20.3""","9.25"" x 12.2""","4,500","2.55""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","SL-35 B","1994","LATHES, CNC, 2-AXIS, CHUCKER",11184,"Fanuc 16T",,,,"1994 Mori-Seiki SL-35 B Fanuc 16T","L2125","-1","Yes","23.6""","9.4"" x 33.7""","2,500","3.5""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","SL-4A","1979","LATHES, CNC, 2-AXIS, CHUCKER",10857,"Fanuc 5T","Fair","Yes","Swing - 25.5"", Swing OCS - 16.53"", 2,500 RPM, 30 HP, 3"" Bore, 10 Sta. Turret, X-Travel - 9.25"", Z-Travel - 24"", 10"" 3-Jaw Hydraulic Chuck, 5-C Collet Closer, Cimnet BTR Board For Direct Computer Input","1979 Mori-Seiki SL-4A Fanuc 5T","L2125","-1","Yes","25.5""","9.25"" x 24""","2,500","2.5""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","CL-25A","1996","LATHES, CNC, 2-AXIS, CHUCKER",10288,"Yasnac LX-3","Very Good","Yes",,"1996 Mori-Seiki CL-25A Yasnac LX-3","L2125","-1","Yes","20.5""","10.2"" x 19.7""","3,000","2.6""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","CL-150","1998","LATHES, CNC, 2-AXIS, CHUCKER",11382,"Mori-Seiki MSC-803L","Good","Yes","20.28"" Swing, 15.74"" Swing Over Cross Slide, 13.5"" Maximum Turning Diameter, 11.93"" Maximum Turning Length, 6,000 RPM, 10 HP, 12 Sta. Turret, 6"" 3-Jaw Chuck, Turbo Chip Conveyor, Manual Tool Presetter","1998 Mori-Seiki CL-150 Mori-Seiki MSC-803L","L2125","0","Yes","20.28""","9.25"" x 12.20""","6,000","1.3","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LNC-8","1994","LATHES, CNC, 2-AXIS, CHUCKER",11435,"OSP-5020L","Good","Yes",,"1994 Okuma LNC-8 OSP-5020L","L2125","0","Yes","21.65""","6.89"" x 16.53""","4,200","1.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Daewoo","Puma-8HC","1995","LATHES, CNC, 2-AXIS, UNIVERSAL",11584,"Fanuc OTC","Good","Yes",,"1995 Daewoo Puma-8HC Fanuc OTC","L2150","0","Yes","19.7","8.3"" x 21.7""","4,000","2.05""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Daewoo","Puma-6H S","1987","LATHES, CNC, 2-AXIS, UNIVERSAL",7999,"Fanuc 10T","Good","Yes",,"1987 Daewoo Puma-6H S Fanuc 10T","L2150","-1","Yes","17.75""","6.3"" x 16.4""","6,000","1.26""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Daewoo","Puma-8 S","1995","LATHES, CNC, 2-AXIS, UNIVERSAL",8773,"Fanuc OTC","Good","Yes","19.7"" Swing, 12.2"" SOC, 18"" Centers, 5,000 RPM,2"" Bar Cap., 20 HP, 12 Sta. Turret, 8"" 3-Jaw Hydraulic Chuck, Programmable Tailstock, Chip Conveyor, Tool Eye, RS-232 Port","1995 Daewoo Puma-8 S Fanuc OTC","L2150","-1","Yes","19.7""","7.9"" x 15""","5,000","2.05""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Daewoo","Puma-8HC","1995","LATHES, CNC, 2-AXIS, UNIVERSAL",11484,"Fanuc OT","Good","Yes",,"1995 Daewoo Puma-8HC Fanuc OT","L2150","0","Yes","19.7""","8.3"" x 21.7""","4,000","2""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Daewoo","Puma-700L","2007","LATHES, CNC, 2-AXIS, UNIVERSAL",11252,"Fanuc 21iTB","Very Good","Yes",,"2007 Daewoo Puma-700L Fanuc 21iTB","L2150","0","Yes","40.5""","18.5"" x 127.98""","1,500","6.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Daewoo","Lynx-210 LC","2002","LATHES, CNC, 2-AXIS, UNIVERSAL",11255,"Fanuc OiTC","Very Good","Yes",,"2002 Daewoo Lynx-210 LC Fanuc OiTC","L2150","0","Yes","20.1""","6.3"" x 20.9""","4,000","2.62""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Daewoo","Puma-200C","1997","LATHES, CNC, 2-AXIS, UNIVERSAL",11257,"Mitsubishi 520L","Good","Yes","20.08"" Swing, 13.78"" Turn Diameter, 20.8"" Centers, 4,500 RPM, 15 HP, 12 Sta. Turret, 8"" 3-Jaw Hydraulic Chuck, Parts Catcher, Collet Nose, Tool Presetter, Tailstock With Programmable Quill, SMW Spacesaver 2000 Bar Feed","1997 Daewoo Puma-200C Mitsubishi 520L","l2150","0","Yes","20.08""","9.5"" x 17.3""","4,500","3.56""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Dainichi","MX-75 1500","1993","LATHES, CNC, 2-AXIS, UNIVERSAL",11135,"Fanuc 15T","Good","Yes",,"1993 Dainichi MX-75 1500 Fanuc 15T","L2150","0","Yes","29.5""","12.1"" x 59.06""","1,400","5.71""","8 / 4","Swing","Travels","RPM","Bar Cap.","Stations"
"Doosan","Puma-400","2010","LATHES, CNC, 2-AXIS, UNIVERSAL",11667,"Fanuc OiTC","Excellent","Yes",,"2010 Doosan Puma-400 Fanuc OiTC","L2150","0","Yes","30.3""","14.3"" x 43.5""","2,500","4""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Doosan","Puma-280","2006","LATHES, CNC, 2-AXIS, UNIVERSAL",11675,"Fanuc 21iTB","Very Good","Yes",,"2006 Doosan Puma-280 Fanuc 21iTB","L2150","0","Yes","24.8""","11.1"" x 26.8""","3,500","3""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Excel","SL-320 / 600","1996","LATHES, CNC, 2-AXIS, UNIVERSAL",11369,"Fanuc OT","Good","Yes","17.7"" Swg, 23.6"" BC, 25 HP, 4,000 RPM, 12 Sta. Turret, Chip Conv., Tooling, 10"" 3-Jaw Hydraulic Chuck, Chip Conveyor","1996 Excel SL-320 / 600 Fanuc OT","L2150","0","Yes","11.8""","7.12"" x 23.62""","4,000","2.76""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Gurutzpe","AT 600-Plus","1998","LATHES, CNC, 2-AXIS, UNIVERSAL",10674,"Fanuc OT","Good","Yes",,"1998 Gurutzpe AT 600-Plus Fanuc OT","L2150","-1","Yes","31.5""","18"" x 120""","1,000","4""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Haas","SL-20T","2000","LATHES, CNC, 2-AXIS, UNIVERSAL",11203,"Haas 32 BIT","Excellent","Yes",,"2000 Haas SL-20T Haas 32 BIT","L2150","0","Yes","20”","8.45"" x 20""","4,000","2""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Haas","SL-20T","2003","LATHES, CNC, 2-AXIS, UNIVERSAL",11258,"Haas 32 BIT","Very Good","Yes",,"2003 Haas SL-20T Haas 32 BIT","L2150","0","Yes","23""","8.45"" x 20""","4,000","2.06""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Haas","TL-1","2005","LATHES, CNC, 2-AXIS, UNIVERSAL",11628,"Haas 32 BIT","Very Good","Yes",,"2005 Haas TL-1 Haas 32 BIT","L2150","0","Yes","16""","8"" x 30""","2,000","2.31","4","Swing","Travels","RPM","Bar Cap.","Stations"
"Haas","ST-20","2010","LATHES, CNC, 2-AXIS, UNIVERSAL",11593,"Haas 32 BIT","Excellent","Yes",,"2010 Haas ST-20 Haas 32 BIT","L2150","0","Yes","31.75","9.3"" x 21""","4,000","2""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Haas","SL-20T","2005","LATHES, CNC, 2-AXIS, UNIVERSAL",11674,"Haas 32 BIT","Very Good","Yes",,"2005 Haas SL-20T Haas 32 BIT","L2150","0","Yes","23""","8.45"" x 20""","4,000","2.06""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Haas","SL-20T","2005","LATHES, CNC, 2-AXIS, UNIVERSAL",11565,"Haas 32 BIT","Very Good","Yes",,"2005 Haas SL-20T Haas 32 BIT","L2150","0","Yes","23""","8.45"" x 20""","4,000","2.06""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Haas","SL-40T","2000","LATHES, CNC, 2-AXIS, UNIVERSAL",11666,"Haas 32 BIT","Very Good","Yes",,"2000 Haas SL-40T Haas 32 BIT","L2150","0","Yes","40""","17"" x 44""","2,400","3.5""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Haas","HL-4","1998","LATHES, CNC, 2-AXIS, UNIVERSAL",11604,"Haas 32 BIT","Good","Yes",,"1998 Haas HL-4 Haas 32 BIT","L2150","0","Yes","24""","11.3"" x 34""","3,400","2.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Hardinge","Conquest T-42","1998","LATHES, CNC, 2-AXIS, UNIVERSAL",11429,"Fanuc 18T","Good","Yes",,"1998 Hardinge Conquest T-42 Fanuc 18T","L2150","0","On Way","21.2""","5.31"" x 13.9""","5,000","1.625""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Hitachi-Seiki","Hitec-Turn 20SII","1995","LATHES, CNC, 2-AXIS, UNIVERSAL",11702,"Yasnac I80","Good","Yes",,"1995 Hitachi-Seiki Hitec-Turn 20SII Yasnac I80","L2150","-1","Yes","18.1""","7.874"" x 15.75""","5,000","2""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Hwacheon","Mega 95","2002","LATHES, CNC, 2-AXIS, UNIVERSAL",11574,"Fanuc 21TB","Very Good","Yes",,"2002 Hwacheon Mega 95 Fanuc 21TB","L2150","0","Yes","36.8""","12.5"" x 195""","1,000","6""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Hyundai","HiT-15S","1997","LATHES, CNC, 2-AXIS, UNIVERSAL",11169,"Siemens 840C","Very Good","Yes","17.32"" Swing, 24"" Centers, 4,200 RPM, 20 HP, 8 Sta. Turret, 8"" 3-Jaw, Tailstock, Turbo Chip Conveyor, Tool Presetter","1997 Hyundai HiT-15S Siemens 840C","L2150","-1","Yes","17.32""","7.1"" x 20""","4,500","2""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Hyundai-Kia","SKT-21","2009","LATHES, CNC, 2-AXIS, UNIVERSAL",11195,"Fanuc OiT","Very Good","Yes",,"2009 Hyundai-Kia SKT-21 Fanuc OiT","L2150","0","Yes","21.7""","8.3"" x 16.9""","4,000","2.56""","15","Swing","Travels","RPM","Bar Cap.","Stations"
"Leadwell","LTC-30 CP","1998","LATHES, CNC, 2-AXIS, UNIVERSAL",11500,"Fanuc OTC","Very Good","Yes",,"1998 Leadwell LTC-30 CP Fanuc OTC","L2150","0","Yes","25.59""","10.6"" x 40.2""","2,000","4.5""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Quick Turn-18N","1993","LATHES, CNC, 2-AXIS, UNIVERSAL",11562,"Mazatrol T-32B","Very Good","Yes",,"1993 Mazak Quick Turn-18N Mazatrol T-32B","L2150","0","Yes","17.32""","7.09"" x 20.08""","3,600","2.75","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","M-5 / 1500","1984","LATHES, CNC, 2-AXIS, UNIVERSAL",10598,"Fanuc 6TB","Good","Yes",,"1984 Mazak M-5 / 1500 Fanuc 6TB","L2150","-1","Yes","24""","21.25"" x 60""","1,100","6.5""","8 + 6","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Quick Turn-20HP","1995","LATHES, CNC, 2-AXIS, UNIVERSAL",11687,"Mazatrol T-PLUS","Good","Yes",,"1995 Mazak Quick Turn-20HP Mazatrol T-PLUS","L2150","0","Yes","17.32""","7.125"" x 20.125""","4,000","2.75""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Super Quick Turn-10","1993","LATHES, CNC, 2-AXIS, UNIVERSAL",11443,"Mazatrol T-32B","Good","Yes",,"1993 Mazak Super Quick Turn-10 Mazatrol T-32B","L2150","0","Yes","17.13""","6.31"" x 17.93""","6,000","1.65""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Quick Turn Nexus-350 II","2010","LATHES, CNC, 2-AXIS, UNIVERSAL",11476,"Mazatrol Matrix","Very Good","Yes",,"2010 Mazak Quick Turn Nexus-350 II Mazatrol Matrix","L2150","0","Yes","26.77""","10.24"" x 63.58""","3,300","4""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","M-5 / 2000","1998","LATHES, CNC, 2-AXIS, UNIVERSAL",11248,"Mazatrol T-Plus","Very Good","Yes",,"1998 Mazak M-5 / 2000 Mazatrol T-Plus","L2150","0","Yes","24""","21.25"" x 88""","1,100","6.5""","8 / 6","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","M-5 / 2000","1981","LATHES, CNC, 2-AXIS, UNIVERSAL",11155,"Fanuc 6T","Good","Yes",,"1981 Mazak M-5 / 2000 Fanuc 6T","L2150","0","Yes","24""","21.2"" x 88""","1,100","6.5""","8 / 6","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Powermaster 3000","1984","LATHES, CNC, 2-AXIS, UNIVERSAL",11244,"Fanuc 6TA","Very Good","Yes",,"1984 Mazak Powermaster 3000 Fanuc 6TA","L2150","0","Yes","31.5""","9.8"" x 110""","1,200","9.5""","8 + 4","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Quick Turn-250","2002","LATHES, CNC, 2-AXIS, UNIVERSAL",11609,"Mazatrol Fusion 640 T","Good","Yes","23.65 Swing, 10.5"" SOC, 15.70 Turn Dia., 19.68"" Turn Length, 5,000 RPM, 2.75"" Bore, 20 HP, 12 Station Turret, 8"" 3-Jaw Hydraulic Chuck, Tailstock, Tool Eye, Conversational Programming, Parts Catcher, Chip Conveyor","2002 Mazak Quick Turn-250 Mazatrol Fusion 640 T","L2150","0","Yes","23.65""","8.46"" x 20.1""","5,000","2""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","M-5 / 2000","1984","LATHES, CNC, 2-AXIS, UNIVERSAL",10599,"Fanuc 6TB","Good","Yes",,"1984 Mazak M-5 / 2000 Fanuc 6TB","L2150","-1","Yes","24""","21.25"" x 80""","1,100","6.5""","8 + 6","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","M-4 / 1500","1979","LATHES, CNC, 2-AXIS, UNIVERSAL",10996,"Fanuc 6TB","Very Good","Yes",,"1979 Mazak M-4 / 1500 Fanuc 6TB","L2150","-1","On Way","22""","21.7"" x 62""","2,200","2.5""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","M-5 / 2500","1979/1997","LATHES, CNC, 2-AXIS, UNIVERSAL",10009,"Mitsubishi Meldas 500","Good","Yes",,"1979/1997 Mazak M-5 / 2500 Mitsubishi Meldas 500","L2150","0","Yes","24""","21.25' x 101""","1,000","6""","8 / 4","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Quick Turn-18N","1992","LATHES, CNC, 2-AXIS, UNIVERSAL",11424,"Mazatrol T-32-2","Good","Yes",,"1992 Mazak Quick Turn-18N Mazatrol T-32-2","L2150","0","Yes","17.32""","7.09"" x 20.08""","3,600","2.75""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","M-4N 1500","1998","LATHES, CNC, 2-AXIS, UNIVERSAL",11657,"Mazatrol M-Plus","Very Good","Yes",,"1998 Mazak M-4N 1500 Mazatrol M-Plus","L2150","0","Yes","22.05""","14.37"" x 60.2""","2,000","2.75""","8 / 6","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Quick Turn-250","1999","LATHES, CNC, 2-AXIS, UNIVERSAL",11374,"Mazatrol Fusion 640 T","Very Good","No","23.65 Swing, 10.5"" SOC, 15.70 Turn Dia., 19.68"" Turn Length, 5,000 RPM, 2.75 Bore, 20 HP, 12 Station Turret, 8"" 3-Jaw Hydraulic Chuck, Tailstock, Programmable Tool Eye, Conversational Programming, Programmable Tailstock Body & Quill, LNS Quick Load Servo 2 Bar Feed","1999 Mazak Quick Turn-250 Mazatrol Fusion 640 T","L2150","0","Yes","23.65""","8.46"" x 20.1""","5,000","2""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","M-5 / 2000","1982","LATHES, CNC, 2-AXIS, UNIVERSAL",11341,"Fanuc 6TB","Good","Yes",,"1982 Mazak M-5 / 2000 Fanuc 6TB","L2150","0","Yes","24""","22"" x 100""","1,200","4.1""","8 / 6","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Quick Turn-10N","1985","LATHES, CNC, 2-AXIS, UNIVERSAL",10127,"Mazatrol T-1","Fair","Yes",,"1985 Mazak Quick Turn-10N Mazatrol T-1","L2150","-1","On Way","17.6""","6.5"" x 21.4""","3,600","1.55""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Super Quick Turn-15M II","1996","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",11506,"Mazatrol T-PLUS","Very Good","Yes",,"1996 Mazak Super Quick Turn-15M II Mazatrol T-PLUS","L2150M","0","Yes","20.91""","7.125"" x 22.75""","5,000","2""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Integrex 300 Y","2000","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",11527,"Mazatrol Fusion 640 T","Good","Yes",,"2000 Mazak Integrex 300 Y Mazatrol Fusion 640 T","L2150M","0","Yes","24.01""","22.3"" x 44.41""","3,500","3""","40","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Slant Turn-40 N ATC M/C","1989","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",10340,"Fanuc 11T","Good","Yes",,"1989 Mazak Slant Turn-40 N ATC M/C Fanuc 11T","L2150M","0","Yes","21.25""","21.65"" x 83.4""","2,200","2.5""","80","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Quick Turn Nexus-350 II MY","2010","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",11688,"Mazatrol Matrix","Excellent","Yes",,"2010 Mazak Quick Turn Nexus-350 II MY Mazatrol Matrix","L2150M","0","Yes","26.77""","8.85"" x 63.38""","3,300","4""","24","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Integrex E-410 H","2006","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",11411,"Mazatrol Fusion 640 M Pro","Very Good","Yes",,"2006 Mazak Integrex E-410 H Mazatrol Fusion 640 M Pro","L2150M","0","Yes","24.01","29.1"" x 72.36"" x 16.14""","4,000","3.625""","40","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Slant Turn-60 Mill Center","1985","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",9542,"Mazatrol T-1","Good","Yes",,"1985 Mazak Slant Turn-60 Mill Center Mazatrol T-1","L2150M","0","Yes","36.02""","25.39"" x 80.12""","750","6""","15","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Slant Turn-35 N ATC M/C","1988","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",11103,"Mazatrol T-3","Good","Yes","18.1"" Swing, Max. Cut. 18.1"", 2,200 RPM, 30 HP, 16 Pos. ATC, Full C-Axis, Live Tools, 12"" 3-Jaw Hydraulic Chuck, Tool Eye, Chip Conveyor, Miscellaneous Tool Holder","1988 Mazak Slant Turn-35 N ATC M/C Mazatrol T-3","L2150M","0","Yes","18.1""","13.2"" x 59.37","2,200","2.65""","16","Swing","Travels","RPM","Bar Cap.","Stations"
"Mighty Viper","VT-17L","2004","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",10785,,"Very Good","Yes",,"2004 Mighty Viper VT-17L ","L2150M","0","Yes","23.5""","8.15"" x 18.5""","5,000","2.04""","12 VDI","Swing","Travels","RPM","Bar Cap.","Stations"
"Milltronics","ML-26","2010","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",11464,"Centurion VII","Excellent","Yes",,"2010 Milltronics ML-26 Centurion VII","L2150M","0","Yes","27""","13"" x 70""","1,600","3.58""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","SL-25 MC / 500","1991","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",10957,"Fanuc OT","Good","Yes",,"1991 Mori-Seiki SL-25 MC / 500 Fanuc OT","L2150M","0","Yes","20.5""","6.3"" x 23.2""","3,000","2.7""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","NL-2500 MCY / 700","2009","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",11213,"Mori-Seiki MSX-850","Excellent","Yes",,"2009 Mori-Seiki NL-2500 MCY / 700 Mori-Seiki MSX-850","L2150M","0","Yes","36.37""","10.24"" x 31.3"" x 3.9""","4,000","3.1""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","NL-3000","2008","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",11672,"Mori-Seiki MSX-850 III","Excellent","Yes",,"2008 Mori-Seiki NL-3000 Mori-Seiki MSX-850 III","L2150M","0","Yes","39.2""","11"" x 32.3""","3,000","3.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","SL-154 Y","2003","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",11463,"Mitsubishi MSG-805","Very Good","Yes",,"2003 Mori-Seiki SL-154 Y Mitsubishi MSG-805","L2150M","0","Yes","26.8""","8.5"" x 19.3""","6,000","1.77""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","SL-253 BMC / 500","2000","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",11160,"Mitsubishi MSC-501 (18iTA)","Good","Yes",,"2000 Mori-Seiki SL-253 BMC / 500 Mitsubishi MSC-501 (18iTA)","L2150M","0","Yes","26.7""","11"" x 19.1""","3,500","2.9""","10","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","Captain L-370 M BB","2001","LATHES, CNC, 3-AXIS, UNIVERSAL W-MILLING",11594,"OSP-E100L","Very Good","Yes","Swing Over Bed 20.8"", Swing Over Saddle 16.54"", Maximum Turning Diameter 13.38"", Length 20"", 3,800 RPM, 30 HP, 12 Sta. Turret","2001 Okuma Captain L-370 M BB OSP-E100L","L2150M","0","Yes","20.08""","10.23"" x 20.47""","3,800","2.75""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Daewoo","Puma-2000 SLYGL","2005","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",10042,"Fanuc 18iT","Very Good","Yes",,"2005 Daewoo Puma-2000 SLYGL Fanuc 18iT","L2125MS","0","Yes","23.622""","10"" x 32.6"" x 3.94""","4,500","2.625""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Daewoo","Puma-230 MSB","2001","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",10436,"Fanuc 18i","Very Good","Yes",,"2001 Daewoo Puma-230 MSB Fanuc 18i","L2125MS","0","Yes","21.65""","8.07"" x 22.83""","6,000","2.56""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Haas","TL-25","2008","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11683,"Haas 32 BIT","Very Good","Yes",,"2008 Haas TL-25 Haas 32 BIT","L2125MS","0","Yes","30""","11.3"" x 36""","3,500","3""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Haas","TL-25","2007","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11631,"Haas 32 BIT","Very Good","Yes",,"2007 Haas TL-25 Haas 32 BIT","L2125MS","0","Yes","30""","11.3"" x 36""","3,500","3""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Haas","TL-15","2002","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",10827,"Haas 32 BIT","Very Good","Yes",,"2002 Haas TL-15 Haas 32 BIT","L2125MS","0","Yes","23""","7.5"" x 18.50","4,000","2""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Hardinge","Conquest T-42","1997","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11436,"Fanuc 18T","Good","Yes",,"1997 Hardinge Conquest T-42 Fanuc 18T","L2125MS","0","Yes","21.2""","5.31"" x 13.9""","4,400","2""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Hardinge","Conquest T-42","1995","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11449,"Fanuc 18T","Good","Yes",,"1995 Hardinge Conquest T-42 Fanuc 18T","L2125MS","0","Yes","21.2""","5.45"" x 13.65""","5,000","1.625""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Hwacheon","Cutex-240","2006","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11323,"Fanuc OiTC","Excellent","Yes",,"2006 Hwacheon Cutex-240 Fanuc OiTC","L2125MS","0","Yes","22.8""","8.46"" x 26.19""","5,000","2.5","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Hwacheon","Hi-Eco 21 HS","1999","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",10770,"Fanuc 18T","Good","Yes",,"1999 Hwacheon Hi-Eco 21 HS Fanuc 18T","L2125MS","0","Yes","23.6""","6.8"" x 17.9""","4,000","2""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Hwacheon","ECO 21HS-S-MC","2000","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",10045,"Fanuc 18T","Good","Yes",,"2000 Hwacheon ECO 21HS-S-MC Fanuc 18T","L2125MS","0","Yes","23.6""","6.8"" x 17.9""","4,000","2""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Kia","Super Kia Turn-15 LMS","2005","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11031,"Fanuc OiTB","Very Good","Yes",,"2005 Kia Super Kia Turn-15 LMS Fanuc OiTB","L2125MS","0","Yes","21.7""","8.7"" x 21.7""","6,000","1.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Kia","Super Kia Turn-21 LMS","2003","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11598,"Fanuc OiTB","Very Good","Yes",,"2003 Kia Super Kia Turn-21 LMS Fanuc OiTB","L2125MS","0","Yes","21.7""","8.7"" x 21.7""","4,000","2.56""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Integrex 100 SY","2001","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11336,"Mazatrol Fusion 640 MT","Very Good","Yes",,"2001 Mazak Integrex 100 SY Mazatrol Fusion 640 MT","L2125MS","-1","Yes","18""","16.14"" x 29""","6,000","2""","40","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Integrex 300 III SY","2004","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11402,"Mazatrol Fusion 640 MT Pro","Excellent","Yes",,"2004 Mazak Integrex 300 III SY Mazatrol Fusion 640 MT Pro","L2125MS","0","Yes","33.5""","24.8"" x 62.41"" x 4.53""","4,000","3""","40","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Integrex 200 SY","1999","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11394,"Mazatrol Fusion 640 MT","Very Good","Yes",,"1999 Mazak Integrex 200 SY Mazatrol Fusion 640 MT","L2125MS","-1","On Way","21.25""","20.87"" x 42""","5,000","1.99""","40","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Integrex 400 SY","2006","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11564,"Mazatrol Fusion 640 T","Very Good","Yes",,"2006 Mazak Integrex 400 SY Mazatrol Fusion 640 T","L2125MS","0","Yes","24.01""","22.83"" x 44.76""","3,500","3.03""","80","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Super Quick Turn-250MSY","1998","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11654,"Mazatrol Fusion 640 MT","Very Good","Yes","Swing 20.67"", Max. Turning 11.75"", 4,000 RPM, 25 HP, 2.5"" Bar Cap., 10"" 3-Jaw Hydraulic Chuck Main Spindle, Automatic Tool Eye, Chip Conveyor, Parts Catcher, Chip Conveyor, SMW Spacesaver 2100 Bar Feed","1998 Mazak Super Quick Turn-250MSY Mazatrol Fusion 640 MT","L2125MS","0","Yes","20.67""","7.12"" x 22.63""","4,000","2.51""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Super Quick Turn-18MS Mark II","1995","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11661,"Mazatrol T-PLUS","Good","Yes",,"1995 Mazak Super Quick Turn-18MS Mark II Mazatrol T-PLUS","L2125MS","0","Yes","20.90""","7.12"" x 22.75""","4,000","2.52""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Super Quick Turn-28MS","1995","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11692,"Mazatrol T-PLUS","Very Good","Yes",,"1995 Mazak Super Quick Turn-28MS Mazatrol T-PLUS","L2125MS","0","Yes","22.04""","9.625"" x 47.75""","3,500","3.03""","12 Stations","Swing","Travels","RPM","Bar Cap.","Stations"
"Mazak","Integrex 200 IV ST","2006","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11694,"Mazatrol Matrix","Very Good","Yes",,"2006 Mazak Integrex 200 IV ST Mazatrol Matrix","L2125MS","0","Yes","26""","22.83"" x 60.82""","5,000","2.5""","40","Swing","Travels","RPM","Bar Cap.","Stations"
"Miyano","BND-34S","1993","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",10941,"Fanuc 0TC","Good","Yes",,"1993 Miyano BND-34S Fanuc 0TC","L2125MS","0","Yes","1","5.50"" x 11.25""","5,000","1.375""","8","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","MT-3000 / 1500","2003","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11086,"Fanuc 18iTA","Very Good","Yes",,"2003 Mori-Seiki MT-3000 / 1500 Fanuc 18iTA","L2125MS","0","Yes","33.46""","22.2"" x 42.4""","4,500","2.5""","20","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","SL-204 SMC","2004","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11710,"Mori-Seiki MSG-805","Very Good","Yes",,"2004 Mori-Seiki SL-204 SMC Mori-Seiki MSG-805","L2125MS","0","Yes","26.8""","9.3"" x 20.5""","4,500","2.5""","12","Swing","Travels","RPM","Bar Cap.","Stations"
"Nakamura-Tome","Super NTY-3","2008","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",10936,"Fanuc 31i-TA","Excellent","Yes",,"2008 Nakamura-Tome Super NTY-3 Fanuc 31i-TA","L2125MS","0","Yes","17""","5.3"" x 9.6"" x 22.7""","6,000","1.65","36","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","MacTurn 30-W","2001","LATHES, CNC, 3-AXIS, W-MILLING and SUB-SPINDLE",11019,"OSP-U100L","Very Good","Yes",,"2001 Okuma MacTurn 30-W OSP-U100L","L2125MS","0","Yes","21.65""","18.70"" x 46.06""","5,000","2""","80","Swing","Travels","RPM","Bar Cap.","Stations"
"Amera-Seiki","TS-42","2006","LATHES, CNC, 4-AXIS, CHUCKER",10634,"Mitsubishi 64SM","New","Yes",,"2006 Amera-Seiki TS-42 Mitsubishi 64SM","L21254","-1","Yes","12.59""","5.65"" x 14.3""","4,000","1.625""","13","Swing","Travels","RPM","Bar Cap.","Stations"
"Kitako","MT4-170","1991","LATHES, CNC, 4-AXIS, CHUCKER",11613,"Fanuc 6T","Good","Yes",,"1991 Kitako MT4-170 Fanuc 6T","L21254","-1","Yes","6.7""","4.3"" x 9.84""","2,500","1.35""","4 x 2","Swing","Travels","RPM","Bar Cap.","Stations"
"Kitako","VT4-350","1999","LATHES, CNC, 4-AXIS, CHUCKER",11583,"Fanuc 18TB","Very Good","Yes","Maximum Turning Diameter 7.9"", Maximum Turning Length 7.9"", 4,000 RPM, 10 HP, Two 6 Station Turrets, Four (4) 8"" 3-Jaw Kitagawa Chucks with Actuators, RS-232, Spindle Orientation, Chip Conveyor, Coolant System","1999 Kitako VT4-350 Fanuc 18TB","L21254","0","Yes","13.8""","11.81"" x 17.72""","3,200",,"6 x 2","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LC-20 2ST","1987","LATHES, CNC, 4-AXIS, CHUCKER",11319,"OSP-5000L",,,"15.75"" Swg, 29.53 Centers, 30 HP, 4,200 RPM, Chip Conveyor","1987 Okuma LC-20 2ST OSP-5000L","L21254","-1","On Way","15.6""","6.89"" x 20.47""","3,500","2.65","8 + 8","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","ZL-200","2002","LATHES, CNC, 4-AXIS, UNIVERSAL",10952,"Mitsubishi MSC-501 (18iTA)","Very Good","Yes","26.8"" Swing, 20.1"" SOC, 16.7"" Turning Length, 4,000 RPM, 15 HP, Two Turrets","2002 Mori-Seiki ZL-200 Mitsubishi MSC-501 (18iTA)","L21504","0","Yes","26.8""","9.3"" x 20.5""","4,000","2""","12 / 8","Swing","Travels","RPM","Bar Cap.","Stations"
"OKK","HP-500 S","2005","MACHINING CENTERS, HORIZONTAL CNC",11349,"Fanuc I80i SMB","Very Good","Yes",,"2005 OKK HP-500 S Fanuc I80i SMB","M0130","0","Yes","19.69"" x 19.69""","360,000°","10,000","40","60","Pallets","Indexing","RPM","Taper","ATC"
"OKK","KCH-500","1994","MACHINING CENTERS, HORIZONTAL CNC",11482,"Mitsubishi Meldas 500","Good","Yes",,"1994 OKK KCH-500 Mitsubishi Meldas 500","M0130","-1","Yes","19.7"" X 19.7""","360,000°","6,000","50","42","Pallets","Indexing","RPM","Taper","ATC"
"OKK","HM-50 S","2000","MACHINING CENTERS, HORIZONTAL CNC",11350,"Fanuc 16iM","Very Good","Yes",,"2000 OKK HM-50 S Fanuc 16iM","M0130","0","Yes","19.68"" X 19.68""","1°","14,000","40","40","Pallets","Indexing","RPM","Taper","ATC"
"OKK","HM-500 S","2007","MACHINING CENTERS, HORIZONTAL CNC",11059,"Fanuc 310 iS","Excellent","Yes",,"2007 OKK HM-500 S Fanuc 310 iS","M0130","0","Yes","19.69"" X 19.69""","360,000°","15,000","40","120","Pallets","Indexing","RPM","Taper","ATC"
"OKK","HP-500 S","2005","MACHINING CENTERS, HORIZONTAL CNC",11712,"Fanuc I80i SMB","Very Good","Yes",,"2005 OKK HP-500 S Fanuc I80i SMB","M0130","0","Yes","19.69"" x 19.69""","360,000°","12,000","40","60","Pallets","Indexing","RPM","Taper","ATC"
"OKK","HM-60","2001","MACHINING CENTERS, HORIZONTAL CNC",10912,"Fanuc 16i","Good","Yes",,"2001 OKK HM-60 Fanuc 16i","M0130","0","Yes","23.6"" x 23.6""","360,000°","8,000","50","40","Pallets","Indexing","RPM","Taper","ATC"
"Okuma","MC-500H","1994","MACHINING CENTERS, HORIZONTAL CNC",9979,"OSP-5020M","Good","Yes",,"1994 Okuma MC-500H OSP-5020M","M0130","-1","Yes","19.69"" x 19.69""","360,000°","5,000","50","40","Pallets","Indexing","RPM","Taper","ATC"
"Scharmann","Salon 2","1989","MACHINING CENTERS, HORIZONTAL CNC",10006,,,"Yes",,"1989 Scharmann Salon 2 ","M0130","-1","On Way","31.5"" x 24.6""","360,000°","3,500","50","80","Pallets","Indexing","RPM","Taper","ATC"
"Sundstrand","OM-1","1979/2001","MACHINING CENTERS, HORIZONTAL CNC",11292,"Fagor 8055","Very Good","Yes",,"1979/2001 Sundstrand OM-1 Fagor 8055","M0130","0","Yes","20""","360,000°","6,000","50","60","Table","Indexing","RPM","Taper","ATC"
"Tongil","Elite MCH-40","1995","MACHINING CENTERS, HORIZONTAL CNC",11366,"Fanuc 15M","Good","Yes",,"1995 Tongil Elite MCH-40 Fanuc 15M","M0130","0","Yes","47"" x 47""","1°","5,000","50","40","Pallets","Indexing","RPM","Taper","ATC"
"Toshiba","BMC-100E","1996","MACHINING CENTERS, HORIZONTAL CNC",11618,"Tosnuc 800","Very Good","Yes","Ten 39.4"" X 39.4"" Pallets, 360,000° Indexing, 78"" x 59"" x 47"" Travels, 5,000 RPM, 50 Taper, 40 HP, 120 ATC, Coolant Through Spindle, Color Monitor, Chip Conveyor, Spindle Chiller","1996 Toshiba BMC-100E Tosnuc 800","M0130","0","Yes","39.4"" X 39.4""","1°","5,000","50","40","Pallets","Indexing","RPM","Taper","ATC"
"Mori-Seiki","ZL-25 / 500","1988","LATHES, CNC, 4-AXIS, UNIVERSAL",11097,"Fanuc MF-D6","Good","Yes",,"1988 Mori-Seiki ZL-25 / 500 Fanuc MF-D6","L21504","0","Yes","20.47""","6.3"" x 23.23""","3,500","2.8""","18","Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","ZL-25A / 500","1989","LATHES, CNC, 4-AXIS, UNIVERSAL",10741,"Fanuc 11TT","Very Good","Yes",,"1989 Mori-Seiki ZL-25A / 500 Fanuc 11TT","L21504","-1","Yes","20.47""","6.3"" x 23.23""","4,200","1.9""","12 / 8","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LU-35 2SC / 850","1995","LATHES, CNC, 4-AXIS, UNIVERSAL",11701,"OSP-7000L","Very Good","Yes",,"1995 Okuma LU-35 2SC / 850 OSP-7000L","L21504","0","Yes","29.13""","14.96"" x 36.22""","3,200","3.15""","12 / 10","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LR-15","1990","LATHES, CNC, 4-AXIS, UNIVERSAL",9743,"OSP-5020L","Good","No",,"1990 Okuma LR-15 OSP-5020L","L21504","-1","On Way","17.72""","8.5"" x 23.62""","3,800","2.75""","18","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LU-300 2SC / 600","2004","LATHES, CNC, 4-AXIS, UNIVERSAL",11080,"OSP-U100L","Good","Yes",,"2004 Okuma LU-300 2SC / 600 OSP-U100L","L21504","0","Yes","20.87""","10.23"" x 25.20""","3,800","2.75""","12 / 8","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LR-15","1991","LATHES, CNC, 4-AXIS, UNIVERSAL",10881,"OSP-5000LG","Fair","Yes",,"1991 Okuma LR-15 OSP-5000LG","L21504","0","Yes","17.72""","8.5"" x 23.62""","3,800","2.75""","18","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LU-400 BB / 1250","2008","LATHES, CNC, 4-AXIS, UNIVERSAL",11634,"OSP-P200L","Excellent","Yes",,"2008 Okuma LU-400 BB / 1250 OSP-P200L","L21504","0","Yes","25.59""","11.81"" x 52.17""","3,000","3.62""","12 / 10","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LU-35 2SC / 1500 BB","2010","LATHES, CNC, 4-AXIS, UNIVERSAL",11607,"OSP-P200L","Like New","Yes",,"2010 Okuma LU-35 2SC / 1500 BB OSP-P200L","L21504","0","Yes","29.13""","14.96"" x 61.81""","2,800","3.75""","12 / 10","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LR-15","1989","LATHES, CNC, 4-AXIS, UNIVERSAL",10880,"OSP-5000L","Fair","Yes",,"1989 Okuma LR-15 OSP-5000L","L21504","0","Yes","17.72""","8.5"" x 23.62""","3,800","2.75""","18","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LC-40M 2SC","1989","LATHES, CNC, 4-AXIS, W-MILLING",11665,"OSP-5000L","Good","Yes",,"1989 Okuma LC-40M 2SC OSP-5000L","L21254M","0","Yes","23.62""","11.22"" x 21.65""","2,500","2.75""","20","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","MacTurn 350-BBW 2S / 1500","2005","LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE",11521,"OSP-E100L","Very Good","Yes",,"2005 Okuma MacTurn 350-BBW 2S / 1500 OSP-E100L","L21256MS","0","Yes","21.65""","19.88"" x 65.75""","5,000","2.8""","120 ATC","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LT-15 MY","1996","LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE",11065,"OSP-5020LG","Good","Yes",,"1996 Okuma LT-15 MY OSP-5020LG","L21256MS","0","Yes","21.81""","8.9"" x 35.4""","4,500","3.75""","24","Swing","Travels","RPM","Bar Cap.","Stations"
"Okuma","LT-15 M","1995","LATHES, CNC, 6-AXIS, W-MILLING and SUB-SPINDLE",11568,"OSP-5020L","Good","Yes",,"1995 Okuma LT-15 M OSP-5020L","L21256MS","0","Yes","21.65""","7.1"" x 18.1""","4,500","1.87","24","Swing","Travels","RPM","Bar Cap.","Stations"
"Amera-Seiki","GT-32","1996","LATHES, CNC, GANG STYLE",8436,"Fanuc OTC","Good","Yes","14.3"" Swing, 10.8"" OCS, 4"" Turning Dia., 11.8"" Turn Length, 1.57"" Spindle Bore, 10 HP, 12"" x 20.8"" Gang Slide, 16C Collet Closure","1996 Amera-Seiki GT-32 Fanuc OTC","L2125G","-1","Yes","14.3""","11.81"" x 9.45""","6,000","1.26""",,"Swing","Travels","RPM","Bar Cap.","Stations"
"Mori-Seiki","DL-151 MC","2000","LATHES, CNC, OPPOSING SPINDLES W-MILLING",11116,"Fanuc 18TT","Good","Yes",,"2000 Mori-Seiki DL-151 MC Fanuc 18TT","L2125TM","0","Yes","16.5""","9.3"" x 9.8""","5,000","1.7""","24","Swing","Travels","RPM","Bar Cap.","Stations"
"American","44"" x 276""",,"LATHES, ENGINE",7590,,"Good","Yes",," American 44"" x 276"" ","L3000","0","Yes","44.5""","56""","157",,"Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"American","64"" x 498""","1987","LATHES, ENGINE",10918,,"Very Good","Yes",,"1987 American 64"" x 498"" ","L3000","0","Yes","64""","498""","157","2 1/2""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"American","52"" x 120""",,"LATHES, ENGINE",10883,,"Very Good","Yes",," American 52"" x 120"" ","L3000","0","Yes","52""","120""","157","2 1/2""",,"Swing","Centers","RPM","Bar Cap.","Threading"
"American","44"" x 156""",,"LATHES, ENGINE",10917,,"Good","Yes",," American 44"" x 156"" ","L3000","0","Yes","44""","156""","260","2 7/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Axelson","41"" x 72""","1962","LATHES, ENGINE",11502,,"Good","Yes",,"1962 Axelson 41"" x 72"" ","L3000","0","Yes","41 1/8""","72""","467","2 5/16""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Axelson","34"" x 144""",,"LATHES, ENGINE",11039,,"Good","Yes",," Axelson 34"" x 144"" ","L3000","0","Yes","34.5""","144""","555","2 3/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Bertram","76"" x 444""",,"LATHES, ENGINE",11714,,"Very Good","Yes",," Bertram 76"" x 444"" ","L3000","0","Yes","75""","360""","101","1 3/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Clausing-Colchester","Series 8000","1980","LATHES, ENGINE",11004,,"Good","Yes",,"1980 Clausing-Colchester Series 8000 ","L3000","0","Yes","17""","80""","2,000","3""",,"Swing","Centers","RPM","Bar Cap.","Threading"
"Clausing-Colchester","15"" x 50""","1987","LATHES, ENGINE",9161,,"Good","Yes",,"1987 Clausing-Colchester 15"" x 50"" ","L3000","0","Yes","15""","50""","2,000","1 3/4""","No","Swing","Centers","RPM","Bar Cap.","Threading"
"Clovis","43"" x 240""","1952","LATHES, ENGINE",7430,,"Good","Yes",,"1952 Clovis 43"" x 240"" ","L3000","0","Yes","43""","240""","520","3.5""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Craven","112"" x 312""",,"LATHES, ENGINE",7980,,"Good","Yes",," Craven 112"" x 312"" ","L3000","0","Yes","112""","312""","36","1 3/4""","No","Swing","Centers","RPM","Bar Cap.","Threading"
"Geminis","GE-1200-S-3G","1982","LATHES, ENGINE",9972,,"Very Good","Yes",,"1982 Geminis GE-1200-S-3G ","L3000","0","Yes","47.24""","315""","280","6""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Hahn and Kolb","28"" x 60""","1966","LATHES, ENGINE",10707,,"Good","Yes",,"1966 Hahn and Kolb 28"" x 60"" ","L3000","0","Yes","26""","60""","710","3 1/2","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Hermes","34"" x 200""","1993","LATHES, ENGINE",9991,,"Very Good","Yes",,"1993 Hermes 34"" x 200"" ","L3000","0","Yes","34""","200""","670","6 1/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Kingston","HLC-1860","1978","LATHES, ENGINE",7996,,"Very Good","Yes",,"1978 Kingston HLC-1860 ","L3000","-1","Yes","18""","60""","1,500","3.14""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Kingston","HL-2000","1981","LATHES, ENGINE",10825,,"Very Good","Yes",,"1981 Kingston HL-2000 ","L3000","-1","On Way","21""","80""","1,500","3 1/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Leblond","Regal","1966","LATHES, ENGINE",10871,,"Very Good","Yes",,"1966 Leblond Regal ","L3000","0","Yes","26""","144""","1,200","5 1/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Leblond","Regal Servo-Shift","1956","LATHES, ENGINE",9522,,"Very Good","Yes","Swing Over Bed 19"", Swing Over Saddle 11 1/4"", Maximum Turning Length 78"", 1,800 RPM, 5 HP, Tailstock, 12"" 4-Jaw Chuck, 10"" 3-Jaw Chuck, 16"" Face Plate, Flex Collet Head, Follow Rest, Inch / Metric Threading, Servo Shift Controls, Aloris Tool Post, Trav-a-Dial","1956 Leblond Regal Servo-Shift ","L3000","-1","Yes","19""","78""","1,800","1 3/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Leblond","NK 4025","1975","LATHES, ENGINE",10994,,"Good","Yes",,"1975 Leblond NK 4025 ","L3000","0","Yes","39""","180""","213","13""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Lehmann","36"" x 240""","1955","LATHES, ENGINE",10935,,"Good","Yes",,"1955 Lehmann 36"" x 240"" ","L3000","0","Yes","36""","240""","150","13 1/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Lehmann","36","1945","LATHES, ENGINE",11534,,"Good","Yes",,"1945 Lehmann 36 ","L3000","0","Yes","48""","96""","195","2 1/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Lehmann","Hydratrol 34"" x 360""","1962","LATHES, ENGINE",11216,,"Good","Yes",,"1962 Lehmann Hydratrol 34"" x 360"" ","L3000","-1","Yes","34""","360""","150","7.8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Lodge and Shipley","3220 Magna Turn","1965","LATHES, ENGINE",7742,,"Good","Yes",,"1965 Lodge and Shipley 3220 Magna Turn ","L3000","0","No","38""","240""","875","3 5/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Mazak","HD-34",,"LATHES, ENGINE",9871,,"Very Good","Yes",," Mazak HD-34 ","L3000","0","Yes","34""","120""","1,200","4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Monarch","15"" x 78""","1943","LATHES, ENGINE",11205,,"Fair","Yes",,"1943 Monarch 15"" x 78"" ","L3000","-1","Yes","18.5""","78""","487","1 1/2""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Monarch","Model 60","1949","LATHES, ENGINE",11002,,"Good","Yes",,"1949 Monarch Model 60 ","L3000","-1","Yes","18.5""","78""","2,000","1 3/4""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Ryazan","16K40","1997","LATHES, ENGINE",9867,,"Very Good","Yes",,"1997 Ryazan 16K40 ","L3000","0","Yes","33.07""","118""","1,250","4.13""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Stanko","K3TC","1980","LATHES, ENGINE",11706,,"Good","Yes",,"1980 Stanko K3TC ","L3000","0","Yes","84""","420""","114",,"Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Victor","Model 2080","1997","LATHES, ENGINE",11416,,,,"20"" Swg, 80"" Centers, 10 HP, 1,500 RPM, 12"" Chuck, Steady Rest, Inch / Metric Threading","1997 Victor Model 2080 ","L3000","-1",,"20""","80""","2,400","4 1/8""","Yes","Swing","Centers","RPM","Bar Cap.","Threading"
"Gisholt","#5","1965","LATHES, TURRET - RAM TYPE",11507,,"Good","Yes",,"1965 Gisholt #5 ","L6249","-1","On Way","20""",,"1,500","1.5""","6 + 4","Swing","Travels","RPM","Bar Cap.","Stations"
"Gisholt","1L","1964","LATHES, TURRET - SADDLE TYPE",11508,,"Good","Yes",,"1964 Gisholt 1L ","L6304","-1","On Way","20""","7 3/4"" x 46 1/2""","1,000","3 1/2""","6 / 4","Swing","Travels","RPM","Bar Cap.","Stations"
"Amera-Seiki","VB-3","2011","MACHINING CENTERS, GANTRY TYPE, NC-CNC",11154,"Fanuc 21iMB","New","Yes",,"2011 Amera-Seiki VB-3 Fanuc 21iMB","M0120","-1","Yes","126"" x 65""","126"" x 79"" x 35""","6,000","50","32","Table","Travels","RPM","Taper","ATC"
"Amera-Seiki","VB-2","2011","MACHINING CENTERS, GANTRY TYPE, NC-CNC",11153,"Fanuc 0iMD","New","Yes",,"2011 Amera-Seiki VB-2 Fanuc 0iMD","M0120","-1","Yes","86.5"" x 65""","87"" x 79"" x 35""","6,000","50","32","Table","Travels","RPM","Taper","ATC"
"Ingersoll",,"1985","MACHINING CENTERS, GANTRY TYPE, NC-CNC",11076,"Fidia M20","Good","Yes",,"1985 Ingersoll Fidia M20","M0120","0","Yes","196.7"" x 98.4""","236.2"" x 118.1"" x 53.4""","24,000","63","60","Table","Travels","RPM","Taper","ATC"
"Johnford","DMC-3100 SH-5A","2005","MACHINING CENTERS, GANTRY TYPE, NC-CNC",11417,"Fanuc 18iMB","Very Good","Yes",,"2005 Johnford DMC-3100 SH-5A Fanuc 18iMB","M0120","0","Yes","126"" x 59""","122"" x 70"" x 31.5""","10,000","50","40","Table","Travels","RPM","Taper","ATC"
"Masco","Bridgemax","2001","MACHINING CENTERS, GANTRY TYPE, NC-CNC",7624,"Fanuc 16i","Very Good","Yes",,"2001 Masco Bridgemax Fanuc 16i","M0120","0","Yes","120"" x 72""","185"" x 100"" x 50""","3,750","50","52","Table","Travels","RPM","Taper","ATC"
"Mori-Seiki","VS-100 50","2005","MACHINING CENTERS, GANTRY TYPE, NC-CNC",11294,"Fanuc 21iMB","Very Good","Yes",,"2005 Mori-Seiki VS-100 50 Fanuc 21iMB","M0120","0","Yes","88.6"" x 39.4""","81"" x 40"" x 17.7","10,000","50","90","Table","Travels","RPM","Taper","ATC"
"SNK","RB-2N","1984","MACHINING CENTERS, GANTRY TYPE, NC-CNC",10796,"Fanuc 9M","Good","Yes","48"" x 110"" Table, 111"" x 67"" x 15.4"" Travels, 2,000 RPM, 50 Taper, 24 ATC, Right Angle Head (Nikken), 12.5"" Rotary Table, Flood Coolant","1984 SNK RB-2N Fanuc 9M","M0120","-1","Yes","48"" x 110""","111"" x 67"" x 15.4""","2,000","50","24","Table","Travels","RPM","Taper","ATC"
"SNK","PM-6B Profiler","1999","MACHINING CENTERS, GANTRY TYPE, NC-CNC",11050,"Fanuc 15M","Very Good","Yes","133' x 120"" Table, 132"" Distance Between Columns, Travel of Each Gantry 97', 120' x 120"" x 32"" Travels, +/- 25° A & B, 7,000 RPM, 50 Taper, 40 HP, Twin Gantry Machine with Three (3) Spindle Each","1999 SNK PM-6B Profiler Fanuc 15M","M0120","-1","Yes","133"" x 120""","120"" x 120"" x 32""","7,000","50",,"Table","Travels","RPM","Taper","ATC"
"Toshiba","MPF-2114","1998","MACHINING CENTERS, GANTRY TYPE, NC-CNC",11478,"Tosnuc 888","Good","Yes",,"1998 Toshiba MPF-2114 Tosnuc 888","M0120","0","Yes","70.9"" x 55.1""","82.7"" x 55.1"" x 28.1""","8,000","50","24","Table","Travels","RPM","Taper","ATC"
"Toshiba","MPF-2140","1999","MACHINING CENTERS, GANTRY TYPE, NC-CNC",11648,"Tosnuc 888","Very Good","Yes",,"1999 Toshiba MPF-2140 Tosnuc 888","M0120","-1","Yes","157.5"" x 70.9""","177"" x 82.7"" x 23.6""","12,000","50","24","Table","Travels","RPM","Taper","ATC"
"Cincinnati","HMC-410 EP","1997","MACHINING CENTERS, HORIZONTAL CNC",10951,"Acramatic 2100","Good","Yes",,"1997 Cincinnati HMC-410 EP Acramatic 2100","M0130","0","On W?ay","15.75"" x 15.75""","360,000°","10,000","40","40","Pallets","Indexing","RPM","Taper","ATC"
"Cincinnati","Maxim-630","1999","MACHINING CENTERS, HORIZONTAL CNC",11320,"Acramatic 2100E","Very Good","No",,"1999 Cincinnati Maxim-630 Acramatic 2100E","M0130","-1","Yes","24.8"" x 24.8""","360,000°","10,000","50","80","Pallets","Indexing","RPM","Taper","ATC"
"Mitsubishi","M-H500","1998","MACHINING CENTERS, HORIZONTAL CNC",10662,"Meldas 500","Good","Yes",,"1998 Mitsubishi M-H500 Meldas 500","M0130","0","Yes","19.7"" x 19.7""","360,000°","6,000","50","60","Pallets","Indexing","RPM","Taper","ATC"
"Mitsui-Seiki","HT-4A","1997","MACHINING CENTERS, HORIZONTAL CNC",11726,"Fanuc 15M","Good","Yes",,"1997 Mitsui-Seiki HT-4A Fanuc 15M","M0130","0","Yes","19.69"" x 19.69""","1°","12,000","50","60","Pallets","Indexing","RPM","Taper","ATC"
"Mitsui-Seiki","HJ-100A","1999","MACHINING CENTERS, HORIZONTAL CNC",11045,"Fanuc 15M","Very Good","Yes",,"1999 Mitsui-Seiki HJ-100A Fanuc 15M","M0130","0","Yes","39.4"" x 39.4""","360,000°","8,000","50","240","Pallets","Indexing","RPM","Taper","ATC"
"Mitsui-Seiki","HU-63A","1999","MACHINING CENTERS, HORIZONTAL CNC",11523,"Fanuc 16MC","Very Good","Yes",,"1999 Mitsui-Seiki HU-63A Fanuc 16MC","M0130","0","Yes","24.8"" x 24.8""","1°","12,000","50","90","Pallets","Indexing","RPM","Taper","ATC"
"Mitsui-Seiki","JIDIC-H6C","1993","MACHINING CENTERS, HORIZONTAL CNC",11656,"Fanuc 15M","Very Good","Yes",,"1993 Mitsui-Seiki JIDIC-H6C Fanuc 15M","M0130","-1","Yes","31.5"" x 31.5""","360,000°","3,150","50","120","Pallets","Indexing","RPM","Taper","ATC"
"Mori-Seiki","NH-5000 / 40","2003","MACHINING CENTERS, HORIZONTAL CNC",11232,"Mori-Seiki MSG-501","Good","Yes",,"2003 Mori-Seiki NH-5000 / 40 Mori-Seiki MSG-501","M0130","0","Yes","19.7"" x 19.7""","1°","14,000","40","30","Pallets","Indexing","RPM","Taper","ATC"
"Mori-Seiki","SH-50","1997","MACHINING CENTERS, HORIZONTAL CNC",10656,"Fanuc 16M","Very Good","Yes",,"1997 Mori-Seiki SH-50 Fanuc 16M","M0130","0","Yes","19.7"" x 19.7""","1°","12,000","40","40","Pallets","Indexing","RPM","Taper","ATC"
"Mori-Seiki","SH-500 / 40","1998","MACHINING CENTERS, HORIZONTAL CNC",10655,"Fanuc 16M","Very Good","Yes",,"1998 Mori-Seiki SH-500 / 40 Fanuc 16M","M0130","0","Yes","19.7"" x 19.7""","1°","12,000","40","60","Pallets","Indexing","RPM","Taper","ATC"
"Mori-Seiki","HVM-630","2005","MACHINING CENTERS, HORIZONTAL CNC",11528,"Mori-Seiki MSG-502","Very Good","Yes",,"2005 Mori-Seiki HVM-630 Mori-Seiki MSG-502","M0130","0","Yes","24.8"" x 24.8""","360,000°","20,000","63 HSK","60","Pallets","Indexing","RPM","Taper","ATC"
"Mori-Seiki","SH-630","1998","MACHINING CENTERS, HORIZONTAL CNC",11725,"Fanuc 16iMA","Good","Yes",,"1998 Mori-Seiki SH-630 Fanuc 16iMA","M0130","0","Yes","24.8"" x 24.8""","1°","10,000","50","60","Pallets","Indexing","RPM","Taper","ATC"
"Mori-Seiki","MH-63","1996","MACHINING CENTERS, HORIZONTAL CNC",11399,"Fanuc 18M","Good","Yes",,"1996 Mori-Seiki MH-63 Fanuc 18M","M0130","0","Yes","24.8"" x 24.8""","1°","15,000","50","120","Pallets","Indexing","RPM","Taper","ATC"
"Mori-Seiki","SH-500 / 40","1999","MACHINING CENTERS, HORIZONTAL CNC",10877,"Fanuc MSG-502","Very Good","Yes",,"1999 Mori-Seiki SH-500 / 40 Fanuc MSG-502","M0130","0","Yes","19.7"" x 19.7""","360,000°","12,000","40","40","Pallets","Indexing","RPM","Taper","ATC"
"Mori-Seiki","SH-50","1997","MACHINING CENTERS, HORIZONTAL CNC",11636,"Mitsubishi MSC-516","Very Good","Yes",,"1997 Mori-Seiki SH-50 Mitsubishi MSC-516","M0130","0","Yes","19.7"" x 19.7""","1°","12,000","40","120","Pallets (17)","Indexing","RPM","Taper","ATC"
"Niigata","SPN-50","1996","MACHINING CENTERS, HORIZONTAL CNC",10919,"Fanuc 16M","Good","Yes",,"1996 Niigata SPN-50 Fanuc 16M","M0130","0","Yes","19.7"" x 19.7""","360,000°","12,000","50","178","Pallets","Indexing","RPM","Taper","ATC"
"Niigata","HN-80C","1993","MACHINING CENTERS, HORIZONTAL CNC",10336,"Fanuc 15MA","Good","Yes",,"1993 Niigata HN-80C Fanuc 15MA","M0130","0","Yes","31.5"" x 31.5""","360,000°","6,000","50","240","Pallets","Indexing","RPM","Taper","ATC"
"Niigata","HN-80C","1996","MACHINING CENTERS, HORIZONTAL CNC",11367,"Fanuc 18iM","Good","Yes",,"1996 Niigata HN-80C Fanuc 18iM","M0130","0","Yes","31.5"" x 31.5""","360,000°","12,000","50","126","Pallets","Indexing","RPM","Taper","ATC"
"Niigata","SPN-50","1995","MACHINING CENTERS, HORIZONTAL CNC",8959,"Fanuc 16M","Very Good","Yes",,"1995 Niigata SPN-50 Fanuc 16M","M0130","-1","Yes","19.7"" x 19.7""","360,000°","12,000","50","178","Pallets","Indexing","RPM","Taper","ATC"
"Niigata","HN-80C","1996","MACHINING CENTERS, HORIZONTAL CNC",11490,"Fanuc 15M","Good","Yes",,"1996 Niigata HN-80C Fanuc 15M","M0130","0","Yes","31.5"" x 31.5""","360,000°","12,000","50","126","Pallets","Indexing","RPM","Taper","ATC"
"OKK","HM-60","2001","MACHINING CENTERS, HORIZONTAL CNC",11427,"Fanuc 16i","Fair","Yes",,"2001 OKK HM-60 Fanuc 16i","M0130","0","Yes","23.6"" x 23.6""","360,000°","8,000","50","40","Pallets","Indexing","RPM","Taper","ATC"
"OKK","HM-800S","2008","MACHINING CENTERS, HORIZONTAL CNC",11316,"Fanuc 310iS","Very Good","Yes",,"2008 OKK HM-800S Fanuc 310iS","M0130","0","Yes","31.49"" x 31.49""","360,000°","12,000","50","116","Pallets","Indexing","RPM","Taper","ATC"
"OKK","HM-80S","1999","MACHINING CENTERS, HORIZONTAL CNC",9778,"Fanuc 160iM","Good","Yes",,"1999 OKK HM-80S Fanuc 160iM","M0130","0","Yes","31.49"" x 31.49""","1°","12,000","50","40","Pallets","Indexing","RPM","Taper","ATC"
"Toshiba","BMC-80E","1984","MACHINING CENTERS, HORIZONTAL CNC",9978,"Tosnuc 600M","Good","Yes",,"1984 Toshiba BMC-80E Tosnuc 600M","M0130","-1","Yes","31.5"" x 31.5""","360,000°","5,000","50","60","Pallets","Indexing","RPM","Taper","ATC"
"Toshiba","BMC-800","1999","MACHINING CENTERS, HORIZONTAL CNC",11428,"Tosnuc 888","Good","Yes",,"1999 Toshiba BMC-800 Tosnuc 888","M0130","0","Yes","31.5"" x 31.5""","360,000°","10,000","50","60","Pallets","Indexing","RPM","Taper","ATC"
"Toshiba","BMC-500","1997","MACHINING CENTERS, HORIZONTAL CNC",10807,"Tosnuc 800","Good","Yes",,"1997 Toshiba BMC-500 Tosnuc 800","M0130","0","Yes","19.7"" x 19.7""","360,000°","5,000","50","60","Pallets","Indexing","RPM","Taper","ATC"
"Toshiba","BMC-630","1997","MACHINING CENTERS, HORIZONTAL CNC",10970,"Tosnuc 888","Good","Yes",,"1997 Toshiba BMC-630 Tosnuc 888","M0130","0","Yes","24.75"" x 24.75""","360,000°","5,000","50","60","Pallets","Indexing","RPM","Taper","ATC"
"Toshiba","BMC-500","1996","MACHINING CENTERS, HORIZONTAL CNC",10942,"Tosnuc 800","Good","Yes",,"1996 Toshiba BMC-500 Tosnuc 800","M0130","0","Yes","19.7"" x 19.7""","360,000°","5,000","50","60","Pallets","Indexing","RPM","Taper","ATC"
"Toyoda","FH-55","1992","MACHINING CENTERS, HORIZONTAL CNC",11441,"Fanuc 15M","Good","Yes",,"1992 Toyoda FH-55 Fanuc 15M","M0130","0","Yes","21.7"" x 21.7""","360,000°","5,000","50","120","Pallets","Indexing","RPM","Taper","ATC"
"Toyoda","FH-100","1989","MACHINING CENTERS, HORIZONTAL CNC",11370,"Fanuc 15M","Fair","Yes",,"1989 Toyoda FH-100 Fanuc 15M","M0130","0","Yes","39.4"" x 39.4""","360,000°","63"" x 47.2"" x 43.3","50","60","Pallets","Indexing","RPM","Taper","ATC"
"Toyoda","FH-55","1990","MACHINING CENTERS, HORIZONTAL CNC",11413,"Fanuc 15M","Needs Repair","No",,"1990 Toyoda FH-55 Fanuc 15M","M0130","-1","On Way","21.7"" x 21.7""","360,000°","12,000","50","48","Pallets","Indexing","RPM","Taper","ATC"
"Akira-Seiki","Performa V-3CXP","2005","MACHINING CENTERS, VERTICAL, CNC",11334,,"Very Good","Yes",,"2005 Akira-Seiki Performa V-3CXP ","M0185","-1","Yes","35"" x 20.08""","32"" x 20"" x 20'","10,000","40","22","Table","Travels","RPM","Taper","ATC"
"Amera-Seiki","VX5-3","2011","MACHINING CENTERS, VERTICAL, CNC",10636,"Fanuc 31iMA","New",,,"2011 Amera-Seiki VX5-3 Fanuc 31iMA","M0185","-1","Yes","128"" x 31.5""","118"" x 39.4"" x 29.5""","12,000","50","32","Table","Travels","RPM","Taper","ATC"
"Cincinnati","20V-120","1989/2007","MACHINING CENTERS, VERTICAL, CNC",9203,"Centroid M 400","Very Good","Yes","122"" x 29.92"" Table, 120"" x 30"" x 24"" Travels, +/- 29° A / B Travels, 3,600 RPM, 50 Taper, 25 HP, Coolant System, Full Five Axis Control, Machine Retrofitted With New Servos and Centroid Control in 2007","1989/2007 Cincinnati 20V-120 Centroid M 400","M0185","-1","Yes","122"" x 29.92""","120"" x 30"" x 24""","3,600","50",,"Table","Travels","RPM","Taper","ATC"
"Cincinnati","20V-80","1985/06","MACHINING CENTERS, VERTICAL, CNC",9204,"Centroid M 400","Very Good","Yes","84.05"" x 29.92"" Table, 78.74"" x 29.94"" x 24"" Travels, +/- 25° A / B Travels, 3,600 RPM, 50 Taper, 25 HP, Coolant System, Full Five Axis Control, Machine Retrofitted With New Servos and Centroid Control in 2007","1985/06 Cincinnati 20V-80 Centroid M 400","M0185","-1","On Way","84.05""x 29.92""","78.74"" x 29.94"" x 24""","3,600","50",,"Table","Travels","RPM","Taper","ATC"
"Daewoo","DMV-650 / 50","1998","MACHINING CENTERS, VERTICAL, CNC",11396,"Fanuc 18MC","Good","Yes",,"1998 Daewoo DMV-650 / 50 Fanuc 18MC","M0185","0","Yes","55.1"" x 27.6""","49.6"" x 25.6"" x 22.9""","8,000","50","40","Table","Travels","RPM","Taper","ATC"
"Daewoo","DMV-500","1998","MACHINING CENTERS, VERTICAL, CNC",11439,"Mitsubishi 520M","Very Good","Yes",,"1998 Daewoo DMV-500 Mitsubishi 520M","M0185","0","Yes","47.2"" x 19.7""","40.2"" x 19.7"" x 20.1""","10,000","40","30","Table","Travels","RPM","Taper","ATC"
"Daewoo","Ace V-50","1997","MACHINING CENTERS, VERTICAL, CNC",11377,"Fanuc OMC","Very Good","Yes",,"1997 Daewoo Ace V-50 Fanuc OMC","M0185","0","Yes","47.2"" x 19.7""","40"" x 20"" x 20.1""","8,000","40","30","Table","Travels","RPM","Taper","ATC"
"Daewoo","DMV-5025","2005","MACHINING CENTERS, VERTICAL, CNC",11605,"Fanuc 21iMB","Very Good","Yes",,"2005 Daewoo DMV-5025 Fanuc 21iMB","M0185","0","Yes","55.1"" x 25.6""","51"" x 25.5"" x 24.6""","12,000","40","24","Table","Travels","RPM","Taper","ATC"
"Daewoo","DMV-500","1999","MACHINING CENTERS, VERTICAL, CNC",11590,"Mitsubishi Meldas 520M","Good","Yes",,"1999 Daewoo DMV-500 Mitsubishi Meldas 520M","M0185","0","Yes","47.2"" x 19.7""","40"" x 19.7"" x 20.1""","8,000","40","30","Table","Travels","RPM","Taper","ATC"
"Daewoo","DMV-650 / 50","1998","MACHINING CENTERS, VERTICAL, CNC",11231,"Fanuc 18MC","Good","Yes",,"1998 Daewoo DMV-650 / 50 Fanuc 18MC","M0185","0","Yes","55.1"" x 27.6""","49.6"" x 25.6"" x 22.9""","6,000","50","30","Table","Travels","RPM","Taper","ATC"
"Enshu","EV-650 VX","1994","MACHINING CENTERS, VERTICAL, CNC",11149,"Yasnac I80","Good","Yes","78.7"" x 25.6"" Table, 63"" x 25.6"" x 25.9"" Travels, 6,000 RPM, 20 HP, 50 Taper, 30 ATC, Coolant Through Spindle","1994 Enshu EV-650 VX Yasnac I80","M0185","0","Yes","78.7” x 25.6”","63"" x 25.6"" x 25.9""","6,000","50","30","Table","Travels","RPM","Taper","ATC"
"Fadal","VMC-8030 HT","1997","MACHINING CENTERS, VERTICAL, CNC",10606,"Fadal 88HS","Very Good","Yes","82.5"" x 30"" Table, 80"" x 30"" x 30"" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 21 ATC, Coolant System, High Torque, Coolant System, Remote Jog Handle","1997 Fadal VMC-8030 HT Fadal 88HS","M0185","0","Yes","82.5"" x 30""","80"" x 30"" x 30""","10,000","40","21","Table","Travels","RPM","Taper","ATC"
"Fadal","VMC-8030 HT","1999","MACHINING CENTERS, VERTICAL, CNC",11290,"Fadal 88HS","Good","Yes",,"1999 Fadal VMC-8030 HT Fadal 88HS","M0185","0","Yes","82.5"" x 30""","80"" x 30"" x 30""","10,000","40","21","Table","Travels","RPM","Taper","ATC"
"Fadal","VMC-3016","1996","MACHINING CENTERS, VERTICAL, CNC",11446,"Fadal 88HS","Good","Yes",,"1996 Fadal VMC-3016 Fadal 88HS","M0185","0","Yes","39"" x 16""","30"" x 16"" x 20""","10,000","40","21","Table","Travels","RPM","Taper","ATC"
"Fadal","VMC-4020 HT","2006","MACHINING CENTERS, VERTICAL, CNC",11713,"Fanuc 18iMB5","Excellent",,"47"" x 20"" Table, 40"" x 20"" x 28"" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 30 ATC, Rigid Tapping, High Torque, Graphics, 422 K Memory, Cool Power","2006 Fadal VMC-4020 HT Fanuc 18iMB5","M0185","-1","Yes","47"" x 20""","40"" x 20"" x 20""","10,000","40","24","Table","Travels","RPM","Taper","ATC"
"Fadal","VMC-15 XT","1997","MACHINING CENTERS, VERTICAL, CNC",11130,"Fadal 88HS","Very Good","Yes",,"1997 Fadal VMC-15 XT Fadal 88HS","M0185","0","Yes","38.5"" x 16""","30"" x 16"" x 28""","7,500","40","21","Table","Travels","RPM","Taper","ATC"
"Fadal","VMC-2216","2000","MACHINING CENTERS, VERTICAL, CNC",11348,"Fadal 32MP CNC","Good","Yes",,"2000 Fadal VMC-2216 Fadal 32MP CNC","M0185","0","Yes","39"" x 16""","22"" x 16"" x 20""","10,000","40","21","Table","Travels","RPM","Taper","ATC"
"Fadal","VMC-6030 HT","2005","MACHINING CENTERS, VERTICAL, CNC",11678,"Fadal 32MP CNC","Excellent","Yes",,"2005 Fadal VMC-6030 HT Fadal 32MP CNC","M0185","0","Yes","62.5"" x 30""","60"" x 30"" x 30""","10,000","40","21","Table","Travels","RPM","Taper","ATC"
"Fadal","VMC-4020 HT","1997","MACHINING CENTERS, VERTICAL, CNC",11331,"Fadal 88HS","Good","Yes","47"" x 20"" Table, 40"" x 20"" x 28"" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 30 ATC, Rigid Tapping, High Torque, RS-232 Port, Remote Jog Handle, 4th Axis Pre-Wired, Graphics","1997 Fadal VMC-4020 HT Fadal 88HS","M0185","0","Yes","47.94"" x 20""","40"" x 20"" x 28""","10,000","40","21","Table","Travels","RPM","Taper","ATC"
"Fadal","VMC-8030 HT","1999","MACHINING CENTERS, VERTICAL, CNC",11431,"Fadal 32MP CNC","Good","Yes","82.5"" x 30"" Table, 80"" x 30"" x 30"" Travels, 10,000 RPM, 22.5 HP, 40 Taper, 21 ATC, Coolant Through Spindle, Rigid Tapping, Remote Jog Handle, High Torque Motor, Coolant System, Chip Conveyor","1999 Fadal VMC-8030 HT Fadal 32MP CNC","M0185","0","Yes","82.5"" x 30""","80"" x 30"" x 30""","10,000","40","30","Table","Travels","RPM","Taper","ATC"
"Fadal","VMC-4020","1995","MACHINING CENTERS, VERTICAL, CNC",11696,"Fadal 88HS","Good","Yes","47"" x 20"" Table, 40"" x 20"" x 28"" Travels, 10,000 RPM, 40 Taper, 15 HP, 21 ATC, Rigid Tapping, Extended Z-Travel, 4th Axis Pre-Wired","1995 Fadal VMC-4020 Fadal 88HS","M0185","-1","Yes","47"" x 20""","40"" x 20"" x 20""","10,000","40","21","Table","Travels","RPM","Taper","ATC"
"Fadal","VMC-6030 HT","2009","MACHINING CENTERS, VERTICAL, CNC",11582,"Fanuc 18iMB","Very Good","Yes",,"2009 Fadal VMC-6030 HT Fanuc 18iMB","M0185","0","Yes","62.5"" x 30""","60"" x 30"" x 28""","10,000","40","24","Table","Travels","RPM","Taper","ATC"
"Haas","VF-2","1999","MACHINING CENTERS, VERTICAL, CNC",11730,"Haas 32 BIT","Very Good","Yes",,"1999 Haas VF-2 Haas 32 BIT","M0185","0","Yes","36"" x 14""","30"" x 16"" x 20""","7,500","40","20","Table","Travels","RPM","Taper","ATC"
"Haas","VF-4","1994","MACHINING CENTERS, VERTICAL, CNC",11123,"Haas 32 BIT","Fair","Yes",,"1994 Haas VF-4 Haas 32 BIT","M0185","0","Yes","52"" x 18""","50"" x 20"" x 25""","7,500","40","20","Table","Travels","RPM","Taper","ATC"
"Haas","VF-3","1993","MACHINING CENTERS, VERTICAL, CNC",11122,"Haas 32 BIT","Fair","Yes",,"1993 Haas VF-3 Haas 32 BIT","M0185","0","Yes","48"" x 18""","40"" x 20"" x 25""","7,500","40","20","Table","Travels","RPM","Taper","ATC"
"Haas","VF-1","1995","MACHINING CENTERS, VERTICAL, CNC",11384,"Haas 32 BIT","Good","Yes",,"1995 Haas VF-1 Haas 32 BIT","M0185","0","Yes","26"" x 14""","20"" x 16"" x 20""","7,500","40","20","Table","Travels","RPM","Taper","ATC"
"Haas","VF-5/50","1999","MACHINING CENTERS, VERTICAL, CNC",11567,"Haas 32 BIT","Good","Yes","52"" x 23"" Table, 50"" x 26"" x 25"" Travels, 5,000 RPM, 50 Taper, 30 HP, 20 ATC, Programmable Coolant, Rigid Tapping, Remote Pulse Generator, Geared Head, 4th Axis Drive, Quick Code, Coolant Through Spindle (300 psi)","1999 Haas VF-5/50 Haas 32 BIT","M0185","0","Yes","52"" x 23""","50"" x 26"" x 25""","5,000","50","20","Table","Travels","RPM","Taper","ATC"
"Haas","VF-2 SS","2004","MACHINING CENTERS, VERTICAL, CNC",11664,"Haas 32 BIT","Very Good","Yes",,"2004 Haas VF-2 SS Haas 32 BIT","M0185","0","Yes","36"" x 14""","30"" x 16"" x 20""","12,000","40","25","Table","Travels","RPM","Taper","ATC"
"Haas","VF-O","2001","MACHINING CENTERS, VERTICAL, CNC",11468,"Haas 32 BIT","Very Good","Yes",,"2001 Haas VF-O Haas 32 BIT","M0185","0","Yes","26"" x 14""","20"" x 16"" x 20""","10,000","40","24","Table","Travels","RPM","Taper","ATC"
"Haas","VF-6/40","2003","MACHINING CENTERS, VERTICAL, CNC",11642,"Haas 32 BIT","Very Good","Yes",,"2003 Haas VF-6/40 Haas 32 BIT","M0185","0","Yes","64"" x 28""","64"" x 32"" x 30""","10,000","40","24","Table","Travels","RPM","Taper","ATC"
"Haas","VF-OE","2001","MACHINING CENTERS, VERTICAL, CNC",11608,"Haas 32 BIT","Very Good","Yes","36"" x 14"" Table, 30"" x 16"" x 20"" Travels, 7,500 RPM, 40 Taper, 20 HP, 20 ATC, Chip Auger, Rigid Tapping, RS-232 Port, 4th Axis Ready, Programmable Coolant, 3.5"" Floppy Drive","2001 Haas VF-OE Haas 32 BIT","M0185","0","Yes","36"" x 14""","30"" x 16"" x 20""","7,500","40","20","Table","Travels","RPM","Taper","ATC"
"Haas","VF-3","2002","MACHINING CENTERS, VERTICAL, CNC",11602,"Haas 32 BIT","Very Good","Yes",,"2002 Haas VF-3 Haas 32 BIT","M0185","0","Yes","48"" x 18""","40"" x 20"" x 25""","7,500","40","24","Table","Travels","RPM","Taper","ATC"
"Haas","VF-4","1999","MACHINING CENTERS, VERTICAL, CNC",11495,"Haas 32 BIT","Very Good","Yes",,"1999 Haas VF-4 Haas 32 BIT","M0185","0","Yes","52"" x 18""","50"" x 20"" x 25""","7,500","40","20","Table","Travels","RPM","Taper","ATC"
"Haas","VF-3 SS","2004","MACHINING CENTERS, VERTICAL, CNC",11447,"Haas 32 BIT","Very Good","Yes",,"2004 Haas VF-3 SS Haas 32 BIT","M0185","0","Yes","48” X 18”","40"" x 20"" x 20""","12,000","40","24","Table","Travels","RPM","Taper","ATC"
"Haas","VF-2","1999","MACHINING CENTERS, VERTICAL, CNC",11497,"Haas 32 BIT","Fair","Yes",,"1999 Haas VF-2 Haas 32 BIT","M0185","0","Yes","36"" x 14""","30"" x 16"" x 20""","10,000","40","21","Table","Travels","RPM","Taper","ATC"
"Haas","TM-1","2008","MACHINING CENTERS, VERTICAL, CNC",11393,"Haas 32 BIT","Excellent","Yes",,"2008 Haas TM-1 Haas 32 BIT","M0185","-1","Yes","47.75"" x 10.5""","30"" x 12"" x 16""","4,000","40","10","Table","Travels","RPM","Taper","ATC"
"Haas","VF-4","1994","MACHINING CENTERS, VERTICAL, CNC",11295,"Haas 32 BIT","Good","Yes","52"" x 18"" Table, 50"" x 20"" x 25"" Travels, 7,500 RPM, 15 HP, 21 ATC, 4th Axis Interface, Quick Code, Rigid Tapping, Chip Auger, 3.5"" Floppy Drive, Two Speed Geared Head, Programmable Coolant, RS-232 Port, 4th Axis Ready (no table)","1994 Haas VF-4 Haas 32 BIT","M0185","0","Yes","52"" x 18""","50"" x 20"" x 25""","7,500","40","21","Table","Travels","RPM","Taper","ATC"
"Haas","VF-5/40","1999","MACHINING CENTERS, VERTICAL, CNC",11673,"Haas 32 BIT","Good","Yes",,"1999 Haas VF-5/40 Haas 32 BIT","M0185","0","Yes","52"" x 23""","50"" x 26"" x 25""","7,500","40","20","Table","Travels","RPM","Taper","ATC"
"Haas","VF-2 SS","2008","MACHINING CENTERS, VERTICAL, CNC",11615,"Haas 32 BIT","Very Good","Yes",,"2008 Haas VF-2 SS Haas 32 BIT","M0185","0","Yes","36"" x 14""","30"" x 16"" x 20""","12,000","40","25","Table","Travels","RPM","Taper","ATC"
"Haas","TM-1","2001","MACHINING CENTERS, VERTICAL, CNC",10954,"Haas 32 BIT","Very Good","Yes",,"2001 Haas TM-1 Haas 32 BIT","M0185","0","Yes","47.75"" x 10.5""","30"" x 12"" x 16""","4,000","40","0","Table","Travels","RPM","Taper","ATC"
"Haas","VF-4","1995","MACHINING CENTERS, VERTICAL, CNC",10855,"Haas 32 BIT","Good","Yes","52"" x 18"" Table, 50"" x 20"" x 25"" Travels, 7,500 RPM, 15 HP, 21 ATC, 4th Axis Interface, Rigid Tapping, Chip Auger, 3.5"" Floppy Drive, Two (2) Speed Geared Head, Programmable Coolant, RS-232 Port, 4th Axis Ready","1995 Haas VF-4 Haas 32 BIT","M0185","0","Yes","52"" x 18""","50"" x 20"" x 25""","7,500","40","21","Table","Travels","RPM","Taper","ATC"
"Haas","VF-2","1997","MACHINING CENTERS, VERTICAL, CNC",11691,"Haas 32 BIT","Good","Yes",,"1997 Haas VF-2 Haas 32 BIT","M0185","0","Yes","36"" x 14""","30"" x 16"" x 20""","7,500","40","21","Table","Travels","RPM","Taper","ATC"
"Haas","VF-6/50","1997","MACHINING CENTERS, VERTICAL, CNC",11627,"Haas 32 BIT","Good","Yes",,"1997 Haas VF-6/50 Haas 32 BIT","M0185","0","Yes","64"" x 28""","64"" x 32"" x 30""","5,000","50","20","Table","Travels","RPM","Taper","ATC"
"Haas","VF-5/50","2007","MACHINING CENTERS, VERTICAL, CNC",11513,"Haas 32 BIT","Very Good","Yes","52"" x 23"" Table, 50"" x 26"" x 25"" Travels, 7,500 RPM, 50 Taper, 30 HP, 24 ATC, Programmable Coolant, Rigid Tapping, Chip Auger, 4th Axis Interface (Brushless), External High-Voltage Isolation Transformer, Remote Jog Handle, USB Port, Two (2) Speed Geared Head, Quick Code, Tool Holders, Haas HRT-310 Rotary Table","2007 Haas VF-5/50 Haas 32 BIT","M0185","0","Yes","52"" x 23""","50"" x 26"" x 25""","7,500","50","24","Table","Travels","RPM","Taper","ATC"
"Haas","VF-4","1997","MACHINING CENTERS, VERTICAL, CNC",11679,"Haas 32 BIT","Good","Yes",,"1997 Haas VF-4 Haas 32 BIT","M0185","0","Yes","52"" x 18""","50"" x 20"" x 25""","7,500","40","20","Table","Travels","RPM","Taper","ATC"
"Haas","VF-2","1997","MACHINING CENTERS, VERTICAL, CNC",11581,"Haas 32 BIT","Good","Yes",,"1997 Haas VF-2 Haas 32 BIT","M0185","0","Yes","36"" x 14""","30"" x 16"" x 20""","7,500","40","21","Table","Travels","RPM","Taper","ATC"
"Haas","VR-11B","2007","MACHINING CENTERS, VERTICAL, CNC",11202,"Haas 32 BIT","Very Good","Yes",,"2007 Haas VR-11B Haas 32 BIT","M0185","0","Yes","120"" x 28""","120"" x 40"" x 30""","10,000","40","32","Table","Travels","RPM","Taper","ATC"
"Hitachi-Seiki","VK-45","1988","MACHINING CENTERS, VERTICAL, CNC",10747,"Seicos MII","Very Good","Yes","44"" X 19"" Table, 6,000 RPM, 10 HP, 40 Taper, 30 ATC, Rigid Tapping, Spindle Nose Air Knife, Remote Jog Handle, 10"" 4th Axis Rotary Table, Quick Change Table, Seicos MII Control, Parts, Electrical and Operation Manuals, Full Enclosure","1988 Hitachi-Seiki VK-45 Seicos MII","M0185","-1","Yes","44"" X 19""","30"" x 19.6"" x 19.6""","6,000","40","30","Table","Travels","RPM","Taper","ATC"
"Hurco","VM-1","2003","MACHINING CENTERS, VERTICAL, CNC",11708,"Ultramax WinMax 4","Very Good","Yes","28"" x 14"" Table, 26"" x 14"" x 18.18"" Travels, 8,000 RPM, 40 Taper, 15 HP, 16 ATC, Ultramax WinMax 4, Flood Coolant, Rigid Tapping, Max Classic Upgrade","2003 Hurco VM-1 Ultramax WinMax 4","M0185","0","Yes","30"" x 14""","26"" x 14"" x 18.18""","8,000","40","16","Table","Travels","RPM","Taper","ATC"
"Hurco","BMC-4020 HT","1998","MACHINING CENTERS, VERTICAL, CNC",9435,"Ultramax SSM","Good","Yes","47"" x 19.7"" Table, 40"" x 20"" x 24"" Travels, 8,000 RPM's, 40 Taper, 20 HP, 24 ATC, Rigid Tapping, RS-232 Port","1998 Hurco BMC-4020 HT Ultramax SSM","M0185","-1","Yes","47"" x 19.7""","40"" x 20"" x 24""","8,000","40","24","Table","Travels","RPM","Taper","ATC"
"Hurco","BMC-30","1997","MACHINING CENTERS, VERTICAL, CNC",11317,"Ultramax SSM","Good","Yes",,"1997 Hurco BMC-30 Ultramax SSM","M0185","0","Yes","40.1"" x 15.7""","30"" x 18"" x 24""","8,000","40","24","Table","Travels","RPM","Taper","ATC"
"Hurco","BMC-30","1997","MACHINING CENTERS, VERTICAL, CNC",11317,"Ultramax SSM","Good","Yes",,"1997 Hurco BMC-30 Ultramax SSM","M0185","0","Yes","40.1"" x 15.7""","30"" x 18"" x 24""","8,000","40","24","Table","Travels","RPM","Taper","ATC"
"Hyundai","SPT-V100","2000","MACHINING CENTERS, VERTICAL, CNC",11485,"Yasnac J-50M","Very Good","Yes","43.3"" x 18.1"" Table, 31.5"" x 18.1"" x 24.41"" Travels, 10,000 RPM, 15 HP, 40 Taper, 24 ATC, Rigid Tapping, RS-232 Port","2000 Hyundai SPT-V100 Yasnac J-50M","M0185","0","Yes","43.3"" x 18.1""","31.5"" x 18.1"" x 24.41""","10,000","40","24","Table","Travels","RPM","Taper","ATC"
"Johnford","DMC-1300 HD","1998","MACHINING CENTERS, VERTICAL, CNC",11390,"Fanuc OM","Good","Yes",,"1998 Johnford DMC-1300 HD Fanuc OM","M0185","0","Yes","55.1"" x 28""","51"" x 33.5"" x 28""","4,500","50","20","Table","Travels","RPM","Taper","ATC"
"Kitamura","Mycenter-7X / 50","1998","MACHINING CENTERS, VERTICAL, CNC",7619,"Yasnac I80","Good","Yes",,"1998 Kitamura Mycenter-7X / 50 Yasnac I80","M0185","0","Yes","66.9"" x 25.6""","60.2"" x 25.6"" x 27""","5,000","50","30","Table","Travels","RPM","Taper","ATC"
"Kitamura","Bridge Center 8","1995","MACHINING CENTERS, VERTICAL, CNC",11084,"Fanuc 15M","Good","Yes",,"1995 Kitamura Bridge Center 8 Fanuc 15M","M0185","0","Yes","98.4"" x 35.4""","80"" x 42.7"" x 27.9""","6,000","50","30","Table","Travels","RPM","Taper","ATC"
"Kitamura","Mycenter-2","1989","MACHINING CENTERS, VERTICAL, CNC",10909,"Fanuc OM","Good","Yes",,"1989 Kitamura Mycenter-2 Fanuc OM","M0185","-1","Yes","35.4"" x 16.1""","23"" x 16.9"" x 18""","7,000","40","20","Table","Travels","RPM","Taper","ATC"
"Makino","S33","2002","MACHINING CENTERS, VERTICAL, CNC",11173,"Fanuc Pro 3","Very Good","Yes",,"2002 Makino S33 Fanuc Pro 3","M0185","0","Yes","23.6"" x 15.7""","25.8"" x 19.7"" x 17.7""","13,000","40","30","Table","Travels","RPM","Taper","ATC"
"Makino","S56","2003","MACHINING CENTERS, VERTICAL, CNC",9391,"Makino Pro 3","Very Good","Yes",,"2003 Makino S56 Makino Pro 3","M0185","0","Yes","39.4"" x 19.7""","35.4"" x 19.7"" x 17.7""","13,000","40","20","Table","Travels","RPM","Taper","ATC"
"Makino","Max 65S","2001","MACHINING CENTERS, VERTICAL, CNC",10499,"Makino Pro 3","Very Good","Yes",,"2001 Makino Max 65S Makino Pro 3","M0185","0","Yes","33.46"" x 17.72""","25.59"" x 15.75"" x 15.75""","12,000","40","20","Table","Travels","RPM","Taper","ATC"
"Matsuura","MC-800V","1986","MACHINING CENTERS, VERTICAL, CNC",11347,"Yasnac MX-2","Need Repair","Yes",,"1986 Matsuura MC-800V Yasnac MX-2","M0185","-1","Yes","46"" x 18""","40"" x 18"" x 20""","4,500","40","30","Table","Travels","RPM","Taper","ATC"
"Matsuura","ES-800V","2005","MACHINING CENTERS, VERTICAL, CNC",11364,,"Very Good","Yes",,"2005 Matsuura ES-800V ","M0185","0","Yes","45.27"" x 21.65""","31.49"" x 21.65"" x 19.68""","12,000","40","30","Table","Travels","RPM","Taper","ATC"
"Matsuura","MC-600 V","1989","MACHINING CENTERS, VERTICAL, CNC",11619,"Yasnac I80","Good","Yes",,"1989 Matsuura MC-600 V Yasnac I80","M0185","-1","Yes","34.6"" x 15.7""","23.62"" x 16.14"" x 18.5""","8,000","40","30","Table","Travels","RPM","Taper","ATC"
"Matsuura","ES-800V","2005","MACHINING CENTERS, VERTICAL, CNC",11364,,"Very Good","Yes",,"2005 Matsuura ES-800V ","M0185","0","Yes","45.27"" x 21.65""","31.49"" x 21.65"" x 19.68""","12,000","40","30","Table","Travels","RPM","Taper","ATC"
"Matsuura","MC-1000V","1983/1997","MACHINING CENTERS, VERTICAL, CNC",11414,"Centurion 6","Good","Yes",,"1983/1997 Matsuura MC-1000V Centurion 6","M0185","-1","Yes","43.3"" x 19.7""","40"" x 20"" x 18.1""","3,600","45","15","Table","Travels","RPM","Taper","ATC"
"Mazak","VTC-20B","1997","MACHINING CENTERS, VERTICAL, CNC",9832,"Mazatrol M-Plus","Good","Yes",,"1997 Mazak VTC-20B Mazatrol M-Plus","M0185","0","Yes","57.4"" x 20.08""","44.09"" x 20.08"" x 20.08""","7,000","40","24","Table","Travels","RPM","Taper","ATC"
"Mazak","VTC-30C","1996","MACHINING CENTERS, VERTICAL, CNC",11438,"Mazatrol M-Plus","Very Good","Yes",,"1996 Mazak VTC-30C Mazatrol M-Plus","M0185","0","Yes","78.74"" x 29.9""","65.35"" x 29.92"" x 26""","8,000","40","24","Table","Travels","RPM","Taper","ATC"
"Mazak","VTC-20B","1995","MACHINING CENTERS, VERTICAL, CNC",11406,"Mazatrol M-32B","Good","Yes",,"1995 Mazak VTC-20B Mazatrol M-32B","M0185","0","Yes","57.48"" x 20.08""","44.09"" x 20.08"" x 20.08""","7,000","40","24","Table","Travels","RPM","Taper","ATC"
"Mazak","MTV-515 / 50","1998","MACHINING CENTERS, VERTICAL, CNC",11460,"Mazatrol Fusion 640 M","Good","Yes",,"1998 Mazak MTV-515 / 50 Mazatrol Fusion 640 M","M0185","0","Yes","51.18"" x 21.65""","40"" x 20"" x 22""","6,000","50","30","Table","Travels","RPM","Taper","ATC"
"Mazak","VTC-200B","2000","MACHINING CENTERS, VERTICAL, CNC",11718,"Mazatrol Fusion 640M","GA","Yes",,"2000 Mazak VTC-200B Mazatrol Fusion 640M","M0185","-1","On Way","57.48"" x 20.08""","44.09"" x 20.08"" x 20.08""","10,000","40","24","Table","Travels","RPM","Taper","ATC"
"Mighty Comet","VMC-1100 PH","1996","MACHINING CENTERS, VERTICAL, CNC",10380,"Mitsubishi 500M","Good","Yes",,"1996 Mighty Comet VMC-1100 PH Mitsubishi 500M","M0185","-1","Yes","49"" x 24""","42"" x 22"" x 25""","8,000","40","24","Table","Travels","RPM","Taper","ATC"
"Milltronics","CSS-1000 CGI","2000","MACHINING CENTERS, VERTICAL, CNC",9763,"Centurion 6 SLS","Very Good","Yes","45"" x 16"" Table, 30"" x 16"" x 16"" Travels, 8,000 RPM, 24 HP, 20 ATC, Reverse Engineering","2000 Milltronics CSS-1000 CGI Centurion 6 SLS","M0185","-1","Yes","45"" x 16""","30"" x 16"" x 20""","8,000","40","20","Table","Travels","RPM","Taper","ATC"
"Monarch","VMC-150B","1994","MACHINING CENTERS, VERTICAL, CNC",10701,"Fanuc 15M","Good","Yes",,"1994 Monarch VMC-150B Fanuc 15M","M0185","0","Yes","84.5"" x 36""","74"" x 36"" x 24""","6,000","50","30","Table","Travels","RPM","Taper","ATC"
"Monarch","VMC-150 E","1982/2001","MACHINING CENTERS, VERTICAL, CNC",11421,"Fanuc OM","Good","Yes",,"1982/2001 Monarch VMC-150 E Fanuc OM","M0185","0","Yes","65"" x 35""","74"" x 36"" x 32""","3,500","45","20","Table","Travels","RPM","Taper","ATC"
"Monarch","VMC-175B","1998","MACHINING CENTERS, VERTICAL, CNC",11459,"Fanuc 18M","Very Good",,,"1998 Monarch VMC-175B Fanuc 18M","M0185","0","On Way","84"" x 30""","76"" x 44"" x 36""","6,000","50","30","Table","Travels","RPM","Taper","ATC"
"Mori-Seiki","NV-5000A / 50","2003","MACHINING CENTERS, VERTICAL, CNC",9392,"Mitsubishi MSC-501 (18iMA)","Very Good","Yes",,"2003 Mori-Seiki NV-5000A / 50 Mitsubishi MSC-501 (18iMA)","M0185","0","Yes","43.3"" x 23.6""","31.5"" x 27.95"" x 20.1""","8,000","50","30","Table","Travels","RPM","Taper","ATC"
"Mori-Seiki","NV-5000A / 50","2003","MACHINING CENTERS, VERTICAL, CNC",11704,"Mitsubishi MSC-501 (18iMA)","Very Good","Yes",,"2003 Mori-Seiki NV-5000A / 50 Mitsubishi MSC-501 (18iMA)","M0185","0","Yes","43.3"" x 23.6""","31.5"" x 20.1"" x 29.1""","8,000","50","30","Table","Travels","RPM","Taper","ATC"
"Mori-Seiki","SV-503 B / 40","2000","MACHINING CENTERS, VERTICAL, CNC",11663,"Mori-Seiki MSG-501","Very Good","Yes","52"" x 23.6"" Table, 31.5"" x 20.1"" x 20.1"" Travels, 10,000 RPM's, 40 Taper, 30 HP, 30 ATC, 1,653 Rapids","2000 Mori-Seiki SV-503 B / 40 Mori-Seiki MSG-501","M0185","0","On Way","43.3"" x 23.6""","31.5"" x 20.1"" x 20.1""","10,000","50","30","Table","Travels","RPM","Taper","ATC"
"Mori-Seiki","VS-100 / 50","2005","MACHINING CENTERS, VERTICAL, CNC",11151,"Mori-Seiki MSX-701M","Excellent","Yes",,"2005 Mori-Seiki VS-100 / 50 Mori-Seiki MSX-701M","M0185","0","Yes","88.6"" x 39.4""","81"" x 40"" x 17.7""","10,000","50","90","Table","Travels","RPM","Taper","ATC"
"Mori-Seiki","SV-500 / 50","1998","MACHINING CENTERS, VERTICAL, CNC",11157,"Mitsubishi MSC-518M","Very Good","Yes","43.31"" x 23.62"" Table, 31.5"" x 20.08"" x 20.08"" Travels, 6,000 RPM, 22 HP, 30 ATC, 50 Taper","1998 Mori-Seiki SV-500 / 50 Mitsubishi MSC-518M","M0185","0","Yes","43.31"" x 23.62""","31.5"" x 20.08"" x 20.08""","10,000","40","30","Table","Travels","RPM","Taper","ATC"
"Mori-Seiki","MV-40","1992","MACHINING CENTERS, VERTICAL, CNC",11163,"Fanuc MF-OMC","Very Good","Yes","35.3"" x 18"" Table, 22"" x 16.15"" x 18.12"" Travels, 8,000 RPM, 40 Taper, 10 HP,","1992 Mori-Seiki MV-40 Fanuc MF-OMC","M0185","0","Yes","38"" x 15""","31.5"" x 16.15"" x 20.1","8,000","40","20","Table","Travels","RPM","Taper","ATC"
"Mori-Seiki","SV-500 B / 40","2000","MACHINING CENTERS, VERTICAL, CNC",11638,"Mitsubishi MSC-501 (18iTA)","Good","Yes","43.31"" x 23.62"" Table, 31.5"" x 20.08"" x 20.08"" Travels, 10,000 RPM, 22 HP, 30 ATC, Rigid Tapping, Helical Interpolation","2000 Mori-Seiki SV-500 B / 40 Mitsubishi MSC-501 (18iTA)","M0185","0","On Way","52"" x 23.62""","40.2"" x 20.08"" x 20.08""","10,000","40","30","Table","Travels","RPM","Taper","ATC"
"Mori-Seiki","NV-5000 B / 40","2002","MACHINING CENTERS, VERTICAL, CNC",11637,"Mori-Seiki MSG-501","Very Good","Yes",,"2002 Mori-Seiki NV-5000 B / 40 Mori-Seiki MSG-501","M0185","0","Yes","52"" x 23.6""","40.2"" x 20.1"" x 20.1""","12,000","40","30","Table","Travels","RPM","Taper","ATC"
"Mori-Seiki","MV-55/50","1995","MACHINING CENTERS, VERTICAL, CNC",11578,"Fanuc MF-M4","Good","Yes",,"1995 Mori-Seiki MV-55/50 Fanuc MF-M4","M0185","0","Yes","55.1"" x 21.7""","41.3"" x 21.6"" x 22""","4,000","50","40","Table","Travels","RPM","Taper","ATC"
"Mori-Seiki","MV-55/50","1992","MACHINING CENTERS, VERTICAL, CNC",11422,"Fanuc OMC","Good","Yes",,"1992 Mori-Seiki MV-55/50 Fanuc OMC","M0185","0","Yes","55.1"" x 21.7""","41.3"" x 21.6"" x 22""","4,000","50","30","Table","Travels","RPM","Taper","ATC"
"Mori-Seiki","MV-JR","1986","MACHINING CENTERS, VERTICAL, CNC",11426,"Fanuc 10M","Good","Yes",,"1986 Mori-Seiki MV-JR Fanuc 10M","M0185","0","Yes","35"" x 17""","22"" x 16"" x 18""","6,000","40","16","Table","Travels","RPM","Taper","ATC"
"Mori-Seiki","SV-500 / 50","1998","MACHINING CENTERS, VERTICAL, CNC",11448,"Mitsubishi MSC-518M","Good","Yes","43.31"" x 23.62"" Table, 31.5"" x 20.08"" x 20.08"" Travels, 6,000 RPM, 22 HP, 30 ATC, Rigid Tapping, Helical Interpolation","1998 Mori-Seiki SV-500 / 50 Mitsubishi MSC-518M","M0185","0","Yes","43.31"" x 23.62""","31.5"" x 20.08"" x 20.08""","6,000","50","30","Table","Travels","RPM","Taper","ATC"
"Okada","GMC-654","1996","MACHINING CENTERS, VERTICAL, CNC",9003,"Fanuc 160MC","Good","Yes",,"1996 Okada GMC-654 Fanuc 160MC","M0185","0","Yes","23.6"" x 19.7""","23.6"" x 19.7"" x 15.7""","25,000","30","8","Table","Travels","RPM","Taper","ATC"
"OKK","VM-5 II","2000","MACHINING CENTERS, VERTICAL, CNC",11289,"OKK NeoMatic 635","Good","Yes",,"2000 OKK VM-5 II OKK NeoMatic 635","M0185","0","Yes","41.34"" x 22.05""","40.16"" x 20.08"" x 20.08""","8,000","40","20","Table","Travels","RPM","Taper","ATC"
"Okuma","Millac 1052-V","2006","MACHINING CENTERS, VERTICAL, CNC",11164,"Fanuc 16iMB","Very Good","Yes",,"2006 Okuma Millac 1052-V Fanuc 16iMB","M0185","0","Yes","126"" x 41.3""","120.03"" x 41.3"" x 31.5""","6,000","50","54","Table","Travels","RPM","Taper","ATC"
"Okuma","MX-45 VAE","1998","MACHINING CENTERS, VERTICAL, CNC",11058,"OSP-700M","Very Good","Yes",,"1998 Okuma MX-45 VAE OSP-700M","M0185","0","Yes","39.37"" x 18.11""","30"" x 18.11"" x 17.72""","7,000","40","20","Table","Travels","RPM","Taper","ATC"
"Okuma","Cadet Mate V-4020","1999","MACHINING CENTERS, VERTICAL, CNC",11376,"OSP-700M","Very Good","Yes",,"1999 Okuma Cadet Mate V-4020 OSP-700M","M0185","0","Yes","47.24"" x 20.08""","40"" x 20"" x 20""","8,000","40","20","Table","Travels","RPM","Taper","ATC"
"Okuma","Cadet Mate V-4020","1996","MACHINING CENTERS, VERTICAL, CNC",11246,"OSP-5020M","Good","Yes",,"1996 Okuma Cadet Mate V-4020 OSP-5020M","M0185","0","Yes","47.24"" x 20.08""","40"" x 20"" x 20""","8,000","40","20","Table","Travels","RPM","Taper","ATC"
"Okuma","Cadet Mate V-4020","1998","MACHINING CENTERS, VERTICAL, CNC",11477,"OSP-700M","Very Good","Yes",,"1998 Okuma Cadet Mate V-4020 OSP-700M","M0185","0","Yes","47.24"" x 20.08""","40"" x 20"" x 20""","8,000","40","20","Table","Travels","RPM","Taper","ATC"
"Okuma","MC-60 VAE","1997","MACHINING CENTERS, VERTICAL, CNC",11681,"OSP-7000M","Good","Yes",,"1997 Okuma MC-60 VAE OSP-7000M","M0185","0","Yes","70.87"" x 30.71""","59"" x 24.8"" x 24""","5,000","50","20","Table","Travels","RPM","Taper","ATC"
"Okuma and Howa","Millac 438V","2000","MACHINING CENTERS, VERTICAL, CNC",11176,"Fanuc 18iMC","Very Good","Yes",,"2000 Okuma and Howa Millac 438V Fanuc 18iMC","M0185","0","Yes","41.3"" x 16.1""","32.3"" x 16.9"" x 17.7""","10,000","40","20","Table","Travels","RPM","Taper","ATC"
"Okuma and Howa","Millac 438V","2000","MACHINING CENTERS, VERTICAL, CNC",11176,"Fanuc 18iMC","Very Good","Yes",,"2000 Okuma and Howa Millac 438V Fanuc 18iMC","M0185","0","Yes","41.3"" x 16.1""","32.3"" x 16.9"" x 17.7""","10,000","40","20","Table","Travels","RPM","Taper","ATC"
"Rambaudi","Rammatic 1400","1990/05","MACHINING CENTERS, VERTICAL, CNC",11051,"Siemens 802D","Good","Yes",,"1990/05 Rambaudi Rammatic 1400 Siemens 802D","M0185","-1","Yes","240"" x 55""","240"" x 50"" x 50""","3,500","50",,"Table","Travels","RPM","Taper","ATC"
"Tree","VMC-1260 EZ 32","1998","MACHINING CENTERS, VERTICAL, CNC",11466,"Vickers PC-2100","Good","Yes",,"1998 Tree VMC-1260 EZ 32 Vickers PC-2100","M0185","0","Yes","56.9"" x 23.2""","50"" x 24"" x 30""","6,000","50","32","Table","Travels","RPM","Taper","ATC"
"Tree","VMC-760","1994","MACHINING CENTERS, VERTICAL, CNC",11070,"Yasnac MX-3","Fair","Yes",,"1994 Tree VMC-760 Yasnac MX-3","M0185","-1","Yes","36.2"" x 18.5""","30"" x 16"" x 25""","8,000","40","20","Table","Travels","RPM","Taper","ATC"
"Yang","SMV-1000","1998","MACHINING CENTERS, VERTICAL, CNC",11599,"Fanuc OM","Very Good","Yes",,"1998 Yang SMV-1000 Fanuc OM","M0185","0","Yes","42.1"" x 19.6""","40"" x 20"" x 20""","8,000","40","20","Table","Travels","RPM","Taper","ATC"
"Daewoo","DMV-400 APC","1999","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",10803,"Fanuc 18M","Good","Yes",,"1999 Daewoo DMV-400 APC Fanuc 18M","M0185P","0","Yes","25.6"" x 17.7""","22"" x 15.7"" x 22.4""","10,000","40","30","Table","Travels","RPM","Taper","ATC"
"Fadal","VMC-4020 HT APC","2001","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",11686,"Fadal 88HS","Very Good","Yes","47"" x 20"" Table, 40"" x 20"" x 28"" Travels, 10,000 RPM, 40 Taper, 22.5 HP, 30 ATC, Rigid Tapping, High Torque, RS-232 Port","2001 Fadal VMC-4020 HT APC Fadal 88HS","M0185P","0","Yes","47.94"" x 20""","40"" x 20"" x 28""","10,000","40","30","Table","Travels","RPM","Taper","ATC"
"Fadal","VMC-4020 HT APC","1996","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",11465,"Fadal 88HS","Very Good","Yes",,"1996 Fadal VMC-4020 HT APC Fadal 88HS","M0185P","0","Yes","52"" x 18""","40"" x 20"" x 28""","10,000","40","30","Table","Travels","RPM","Taper","ATC"
"Hyundai-Kia","KV-25P","2008","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",11728,"Fanuc OiT","Very Good","Yes",,"2008 Hyundai-Kia KV-25P Fanuc OiT","M0185P","0","Yes","25.36"" x 11.8""","19.7"" x 11"" x 15""","12,000","30","16","Table","Travels","RPM","Taper","ATC"
"Kitamura","Mycenter-1 APC","1992","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",11174,"Fanuc OM","Very Good","Yes",,"1992 Kitamura Mycenter-1 APC Fanuc OM","M0185P","0","Yes","19.7"" x 11.8""","19.1"" x 13"" x 16""","13,000","35","20","Table","Travels","RPM","Taper","ATC"
"Kitamura","Mycenter-1 APC","1999","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",11717,"Yasnac I80","Very Good","Yes",,"1999 Kitamura Mycenter-1 APC Yasnac I80","M0185P","0","Yes","30.94"" x 13.97""","20"" x 14"" x 16""","13,000","35","20","Table","Travels","RPM","Taper","ATC"
"Makino","SNC-106 A30","1998","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",8486,"Fanuc Pro 3","Very Good","Yes",,"1998 Makino SNC-106 A30 Fanuc Pro 3","M0185P","0","Yes","43.3"" x 23.62""","39.37"" x 23.62"" x 15.75""","15,000","40","30","Table","Travels","RPM","Taper","ATC"
"Matsuura","RA-1G","1998","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",11458,"Yasnac I80","Very Good","Yes",,"1998 Matsuura RA-1G Yasnac I80","M0185P","0","Yes","24.9"" x 14.9""","20"" x 15.7"" x 18.1""","6,000","40","30","Table","Travels","RPM","Taper","ATC"
"Matsuura","RA-5","1993","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",11180,"Fanuc OMC","Excellent","Yes",,"1993 Matsuura RA-5 Fanuc OMC","M0185P","-1","Yes","43.3"" x 21.2""","41.34"" x 22.05"" x 22.05""","4,500","50","30","Table","Travels","RPM","Taper","ATC"
"Matsuura","RA-IIF","1998","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",11457,"Yasnac I80","Very Good","Yes",,"1998 Matsuura RA-IIF Yasnac I80","M0185P","0","Yes","23.6"" x 14.9""","23.62"" x 16.14"" x 18.5""","8,000","40","30","Table","Travels","RPM","Taper","ATC"
"Monarch","VMC-75B APC","1995","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",11425,"Fanuc 15MB","Good","Yes","49"" x 21"" Table, 40"" x 20"" x 24"" Travels, 6,000 RPM, 20 HP, 26 ATC, Coolant Through Spindle, Probing, Heidenhain Scales","1995 Monarch VMC-75B APC Fanuc 15MB","M0185P","0","Yes","49.25"" x 21""","40"" x 24"" x 24""","10,000","45","55","Table","Travels","RPM","Taper","ATC"
"Mori-Seiki","MV-40 APC","1991","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",11474,"Fanuc MF-M4","Very Good","Yes","35.3"" x 18"" Table, 22"" x 16.15"" x 18.12"" Travels, 8,000 RPM, 40 Taper, 22 HP, Very Low Hours","1991 Mori-Seiki MV-40 APC Fanuc MF-M4","M0185P","0","Yes","35.3"" x 15""","31.5"" x 16.15"" x 20.1""","7,500","40","20","Table","Travels","RPM","Taper","ATC"
"Mori-Seiki","MV-653/40 APC","2008","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",11538,"Fanuc 16MA","Excellent","Yes",,"2008 Mori-Seiki MV-653/40 APC Fanuc 16MA","M0185P","-1","Yes","66.93"" x 25.59""","60"" x 26"" x 25.6""","12,000","40","40","Table","Travels","RPM","Taper","ATC"
"Mori-Seiki","MV-40 APC","1993","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",10375,"Fanuc OMC","Good","Yes","35.3"" x 18"" Table, 22"" x 16.15"" x 18.12"" Travels, 8,000 RPM, 40 Taper, 22 HP, Very Low Hours","1993 Mori-Seiki MV-40 APC Fanuc OMC","M0185P","0","Yes","43.3"" x 17.7""","31.5"" x 16.15"" x 20.1""","8,000","40","30","Table","Travels","RPM","Taper","ATC"
"NTC","NV4G","1999","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",11378,"Fanuc 21iM","Good","Yes",,"1999 NTC NV4G Fanuc 21iM","M0185P","0","Yes","20.5"" x 18.5""","19.68"" x 17.73"" x 17.73""","10,000","40","24","Table","Travels","RPM","Taper","ATC"
"NTC","NV4G","1999","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",11328,"Fanuc 21iM","Very Good","Yes",,"1999 NTC NV4G Fanuc 21iM","M0185P","-1","Yes","20.5"" x 18.5""","19.68"" x 17.73"" x 17.73""","10,000","40","24","Pallets","Travels","RPM","Taper","ATC"
"Stama","MC-326 Twin","2001","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",11699,"Fanuc 16i","Very Good","Yes",,"2001 Stama MC-326 Twin Fanuc 16i","M0185P","-1","Yes","27.5"" x 15.7""","20.74"" x 14.17"" x 13.78""","10,000","40","48","Table","Travels","RPM","Taper","ATC"
"Stama","MC-326 Twin","2001","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",11699,"Fanuc 16i","Very Good","Yes",,"2001 Stama MC-326 Twin Fanuc 16i","M0185P","-1","Yes","27.5"" x 15.7""","20.74"" x 14.17"" x 13.78""","12,000","40","48","Table","Travels","RPM","Taper","ATC"
"Supermax","FV-56A","2001","MACHINING CENTERS, VERTICAL, CNC W-PALLETS",10782,"Fanuc 18M","Very Good","Yes",,"2001 Supermax FV-56A Fanuc 18M","M0185P","0","Yes","27.55"" x 16.53""","22.04"" x 16.14"" x 17.71""","12,000","40","20","Table","Travels","RPM","Taper","ATC"
"Futurmill","72"" x 240""",,"MILLERS, PLANER TYPE, OPENSIDE",9877,,"Very Good","Yes",," Futurmill 72"" x 240"" ","M2050O","0","Yes","72"" x 240""","84"" x 72"" x 240""","566","30","50","Table","Travels","RPM","HP","Taper"
"Bridgeport","Series I","1982","MILLERS, UNIVERSAL",5758,,"Fair","Yes",,"1982 Bridgeport Series I ","M2680","-1","Yes","48"" x 9""","36"" x 12"" x 16""","4,200","2",,"Table","Travels","RPM","HP","Taper"
"Lagun","FTV-3","1982","MILLERS, UNIVERSAL",11379,"Anilam Crusader II","Very Good","Yes",,"1982 Lagun FTV-3 Anilam Crusader II","M2680","0","Yes","54"" x 11""","15"" x 16"" x 15","4,000","5","40","Table","Travels","RPM","HP","Taper"
"Chevalier","2040B","2002","MILLERS, VERT-UNIVERSAL NC and CNC",11516,"Dynapath Delta 30","Very Good","Yes",,"2002 Chevalier 2040B Dynapath Delta 30","M2833","0","Yes","50"" x 20""","40"" x 20"" x 15""","4,000","7.5","40","Table","Travels","RPM","HP","Taper"
"Fryer","MB-11","1992","MILLERS, VERT-UNIVERSAL NC and CNC",11551,"Anilam 1100","Good",,,"1992 Fryer MB-11 Anilam 1100","M2833","-1","Yes","50"" x 10""","30"" x 18"" x 20""","4,200","5","40 Taper","Table","Travels","RPM","HP","Taper"
"Beckwood","4P-500F-300P-4848","1999","PRESSES, HYDRAULIC",10697,,"Very Good","Yes",,"1999 Beckwood 4P-500F-300P-4848 ","P5102","-1","Yes","500","48"" x 48""","21""","210","75","Tons","Bed","Ram","SPM","HP"
"Minster","Hummingbird","1980/2005","PRESSES, O.B.I.",10587,,"Very Good","Yes",,"1980/2005 Minster Hummingbird ","P6150","-1","Yes","30","31"" x 20""","1.26""","1,300","15","Tons","Bed","Ram","SPM","HP"
"USI-Clearing","75 Ton","19??","PRESSES, O.B.I.",10933,,"Very Good","Yes",,"19?? USI-Clearing 75 Ton ","P6150","-1","On Way","75","25"" x 36""","3","45","15","Tons","Bed","Ram","SPM","HP"
"USI-Clearing","110 Ton","19??","PRESSES, O.B.I.",10932,,"Very Good","Yes",,"19?? USI-Clearing 110 Ton ","P6150","-1","On Way","110","30"" x 39""","5""","40","15","Tons","Bed","Ram","SPM","HP"
"Warco","110 Ton","19??","PRESSES, O.B.I.",10934,,"Very Good","Yes",,"19?? Warco 110 Ton ","P6150","-1","On Way","110","11"" x 16""","2""","48","15","Tons","Bed","Ram","SPM","HP"
"Roundo","R-13-S","1996","ROLLS, ANGLE BENDING",11322,,"Very Good","Yes","Angle Bend Capacity - 8"" x 8"" x 1 - 1/4"", Diameter of Bending Rolls 32"", 108 HP, Large Selection of Dies For Pipe and Beams, Large Selection of Spacers, Oversized Shaft, Motors & Drive, Hydraulically Controlled Guide Rolls - Up / Down / In & Out, Full Pendant Control, Five (5) Sets of Pipe Rolls","1996 Roundo R-13-S ","R4704","-1","Yes","8"" x 8"" x 1 - 1/4""","16"" x 2-3/8""","10 1/2""",,"108","Angle Out","Flat","Round","FPM","HP"
"Steco","SBM/4",,"ROLLS, ANGLE BENDING",10981,,"Good","Yes",," Steco SBM/4 ","R4704","-1","Yes","4"" x 4"" x 3/4""","8"" x 3"" @ 16#","2 3/4""","15","12","Angle Out","Flat","Round","FPM","HP"
"Kulma Pulmax","PV7H",,"ROLLS, PLATE BENDING, PYRAMID TYPE",10980,,"Very Good","Yes",," Kulma Pulmax PV7H ","R5610","-1","Yes","160""","1/2 @ 13.6'","15""","15""","15","Length","Thickness","Roll Dia. Top","Roll Dia. Bot","HP"
"Pope","16-2",,"ROLLS, PLATE BENDING, PYRAMID TYPE",11524,,"Good","Yes",," Pope 16-2 ","R5610","0","Yes","16'","1""","18.25""","13.25""","50","Length","Thickness","Roll Dia. Top","Roll Dia. Bot","HP"
"Thermwood","M-67","2002","ROUTERS, NC and CNC",11351,"Thermwood 9100 Control","Very Good","Yes",,"2002 Thermwood M-67 Thermwood 9100 Control","R8906","0","Yes","60"" x 120""","120"" x 60"" x 24""","20,000","30","10","Table","Travels","RPM","Taper","HP"
"Amada","HA-250","1991","SAWS, BAND, HORIZONTAL",11303,,"Good","Yes","10"" x 11"" Rectangle Capacity, 10"" Round Cap., 1"" x .037"" x 138"" Blade, 3 HP, Auto Feed w/Roller Conveyor, Fully Hydraulic, Variable Blade Speed, Coolant Pump","1991 Amada HA-250 ","S0653","0","Yes","10"" X 11""","11""","1"" x .037"" x 138""","262","3","Square","Round","Blade","FPM","HP"
"Behringer","HBP-430A","1997","SAWS, BAND, HORIZONTAL",8733,,"Very Good","Yes",,"1997 Behringer HBP-430A ","S0653","0","Yes","16.93"" x 16.93""","16.93""","1.97"" x .050"" x 228""","55 - 360","10","Square","Round","Blade","FPM","HP"
"Behringer","HBP-400","1982","SAWS, BAND, HORIZONTAL",11572,,"Good","Yes",,"1982 Behringer HBP-400 ","S0653","0","Yes","16"" x 18""","16""","1 1/2” x .050” x 228""","360","7","Square","Round","Blade","FPM","HP"
"Do-All","C-305A","2006","SAWS, BAND, HORIZONTAL",11311,"DoAll NC Control","Very Good","Yes",,"2006 Do-All C-305A DoAll NC Control","S0653","0","Yes","12"" x 12""","12""","1 1/42"" x .042"" x 144""","350","5","Square","Round","Blade","FPM","HP"
"Do-All","C-410A","1992","SAWS, BAND, HORIZONTAL",11221,,"Very Good","Yes",,"1992 Do-All C-410A ","S0653","0","Yes","14"" X 14""","16""","1 1/2"" x .032"" x 186""","360","7.5","Square","Round","Blade","FPM","HP"
"HEM","DC-20 HA","2004","SAWS, BAND, HORIZONTAL",11243,,"Very Good","Yes",,"2004 HEM DC-20 HA ","S0653","0","Yes","20"" x 20""","20""","1.5"" x .050"" x 236""","370","10","Square","Round","Blade","FPM","HP"
"Hyd-Mech","S-23A","2008","SAWS, BAND, HORIZONTAL",10840,,"Excellent","Yes",,"2008 Hyd-Mech S-23A ","S0653","0","Yes","18""","16""","1 1/4"" x .035"" x 15’ 6""","350","5","Square","Round","Blade","FPM","HP"
"Kasto","SBA-320","1998","SAWS, BAND, HORIZONTAL",11573,,"Very Good","Yes",,"1998 Kasto SBA-320 ","S0653","0","Yes","14"" x 16""","14""","1 1/4"" x .05"" x 210""","425","7","Square","Round","Blade","FPM","HP"
"Peerless","HB-915A","1988","SAWS, BAND, HORIZONTAL",9764,,"Good","Yes",,"1988 Peerless HB-915A ","S0653","-1","Yes","9"" x 15""","15""","1 1/2"" x .050"" x 180""","80 - 400","7.5","Square","Round","Blade","FPM","HP"
"Voortman","VB-1050","2006","SAWS, BAND, HORIZONTAL",10892,,"Excellent","Yes",,"2006 Voortman VB-1050 ","S0653","0","Yes","20"" x 20""","20""","2"" x .063"" x 377""","400","10","Square","Round","Blade","FPM","HP"
"Wells","F-1620-3U","1998","SAWS, BAND, HORIZONTAL",11227,,"Good","Yes",,"1998 Wells F-1620-3U ","S0653","0","Yes","16"" X 16""","16""","1 1/2"" x .042"" x 214""","430","10","Square","Round","Blade","FPM","HP"
"Do-All","TF2020M","1980","SAWS, BAND, VERTICAL",8910,,"Fair","Yes",,"1980 Do-All TF2020M ","S0690","0","Yes","1","20""","192"" / 1.5"" / .042""","300","10","Throat","Max. Height","Blade","FPM","HP"
"Peerless","VB1820XL","1992","SAWS, BAND, VERTICAL",8909,,"Fair","Yes",,"1992 Peerless VB1820XL ","S0690","0","Yes","1","18""","174"" / 1"" / .035""","400","5","Throat","Max. Height","Blade","FPM","HP"