Below are the specs we have on file for this
machine. Please contact Machine Tools 24-7 if
you have any questions.
| Machine ID | Year | Manufacturer | Model | Control |
| 9320 | 2001 | Daewoo | DHP-630 | Fanuc 16iMB |
| | Description | Spec Values |
| Pallet: | Pallet Size (2 Pallets) | 24.8" x 24.8" |
| | Pallet Indexing / Table Load | 360,000° / 2,640 Lbs |
| Travels: | X-Axis Travel | 39.4" |
| | Y-Axis Travel | 33.46" |
| | Z-Axis Travel | 33.46" |
| Spindle: | Spindle Speeds Minimum - Maximum | 50 - 6,000 RPM |
| | Spindle Taper | 50 Taper |
| | Main Motor (30 min / continuous) | 40 / 29 HP |
| | Spindle Center to Table Top | 2" - 33.6" |
| Tool Changer: | Tool Changer Positions | 60 ATC |
| | Tool Change Time (Tool-to-Tool / Chip-to-Chip) | 1.3 / 3.9 Sec. |
| Rapids: | Rapid Traverse (X, Y & Z ) | 978 IPM |
| | Feed Rate | 0.01 - 472 IPM |
| Dimensions: | Floor Space (L x W x H) | 244" x 113" x 126" |
| | Weight (approx.) | 45,500 Lbs |
| | Equipped With |
| Additional Info.: | Rigid Tapping |
| | Coolant Through Spindle (220 psi) |
| | Coolant Filtration System |
| | Remote Jog Handle |
| | Chip Conveyor |
| | Spindle Chiller |
| | Auto Doors |
| Note: | Under 2,000 Hours On The Machine |
| Click Here To Print Quote - | 9320 |
| Click Here To Email Quote Request - | 9320 |
TERMS: Cash or Cashiers Check with order,
and all equipment is FOB on floor from sold location unless
otherwise stated. All equipment subject to prior sales and is
exclusive of any government tax. Equipment descriptions are intended
only as a guide and their accuracy is not guaranteed. CONDITIONS:
Item(s) are sold "As Is, Where Is" unless other arrangements have
been made and conveyed in writing. There are no warranties, which
extend beyond the description on the face hereof; quotation subject
to change without notice. All agreements and/or contracts made by
sales person are subject to approval. -EQUIPMENT SAFETY: It is the
buyer's/user's responsibility to provide proper safety devices and
equipment to safeguard persons from harm resulting from any
particular use, operation or set-up, and to adequately safeguard the
equipment conform to all Federal, State and Local Government Safety
Standards and all Industrial Standards. - INDEMNIFICATION:
Buyer/User agrees to Indemnify and hold harmless Seller and
Salespersons from any and all claims or liabilities caused by or
arising from the equipment on the face hereof. All equipment quoted
is subject to prior sale. It is purchasers responsibility to verify
machine condition, specifications and pay any and all applicable
taxes.
