Machine Tools 24-7
All The Used CNC and Manual Machine Tools You Need - All Of The Time
Office (352) 799-8398
Fax (352) 799-0315
Click Here to Email Us
Copyright © 2015 Machine Tools 24-7. All Rights Reserved.
Click Here to Bookmark this Site
All Machines Available By Type

You Can Sort The Table Below By Clicking on The Column Header (table pre-sorted by Mfg, Model, then Year)
Click On The Machine ID Number Below To View Machine Quote & Photos
ManufacturerModelYearMachine IDType MachineControlConditionU / PShortSpecsPhotosList
DaewooPuma-TT-1800 SY200616762LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBGoodYes Yes2006 Daewoo Puma-TT-1800 SY Fanuc 18iTB
DoosanPuma-TT-1500 SY200616675LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBGoodYes Yes2006 Doosan Puma-TT-1500 SY Fanuc 18iTB
DoosanPuma-TT-1800 SY201816791LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 31iBExcellentYes Yes2018 Doosan Puma-TT-1800 SY Fanuc 31iB
DoosanPuma-TT-2000 SY200516668LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBGoodYes Yes2005 Doosan Puma-TT-2000 SY Fanuc 18iTB
Hyundai-KiaSKT-250 TTSY201016415LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBVery GoodYes Yes2010 Hyundai-Kia SKT-250 TTSY Fanuc 18iTB
Hyundai-KiaSKT-250 TTSY201216315LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBVery GoodYes Yes2012 Hyundai-Kia SKT-250 TTSY Fanuc 18iTB
MazakHyper Quadrex-150 MSY201216267LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLE Very GoodYes14.3" Swing, 11.81" Turn Dia., 22.3" Centers, 5,000 RPM, 20 HP, 24 Sta. Turret, Collet Chuck, LNS Servo 80-S2 Bar Feed, Chip Conveyor, Parts Catcher, More..Yes2012 Mazak Hyper Quadrex-150 MSY
MazakHyper Quadrex-200 MSY201116751LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEMazatrol Matrix IIVery GoodYes14.67" Swing, 13.54" Turn Dia., 33" Centers, 5,000 RPM, 30 HP, 2 - 12 Sta. Turrets, 10" Collet Chuck Main and Sub, Bar Feed Interface, Bar Feed, More.Yes2011 Mazak Hyper Quadrex-200 MSY Mazatrol Matrix II
MazakIntegrex 200 III ST200416280LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEMazatrol Fusion 640 MT ProVery GoodYes Yes2004 Mazak Integrex 200 III ST Mazatrol Fusion 640 MT Pro
MazakIntegrex 200 IV ST200816537LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEMazatrol MatrixGoodYes Yes2008 Mazak Integrex 200 IV ST Mazatrol Matrix
MiyanoBNE-34S3200516367LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBExcellentYes15" Swing, 13" SOC, 5,000 RPM, 1.34" Bar Cap., 10 HP, 12 Sta. Turret, Collet Chuck on Main and Sub, Toolsetter, Parts Catcher, Bar Feed, MoreYes2005 Miyano BNE-34S3 Fanuc 18iTB
Mori-SeikiMT-2000 SZ200116512LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSG-501TA (Fanuc 18iT)Very GoodYes29.52" Swing, 21.6" Turn Dia., 50.47" Centers, 4,500 RPM, 40 HP, 40 ATC, 12 Sta. Turret, Collet Chucks, LNS Bar Feed, High Pressure Coolant, More..Yes2001 Mori-Seiki MT-2000 SZ Mori-Seiki MSG-501TA (Fanuc 18iT)
Mori-SeikiMT-2000 SZ200316683LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSG-501TA (Fanuc 18iT)GoodYesSwing 29.52", Swing Over C.S. 23.62", Maximum Turning Diameter 21.6", Length 40.15", 4,500 RPM, 2.5" Bar Cap., 20 HP, 12 Sta. Turret, 40 Sta. ATC, Coolant Through Spindle, More.Yes2003 Mori-Seiki MT-2000 SZ Mori-Seiki MSG-501TA (Fanuc 18iT)
Mori-SeikiMT-2500 SZ200516600LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEMori-Seiki MSX-501 (Fanuc 18iM)Very GoodYesSwing 35.8", Swing Over Cross Slide 23.62", Maximum Turning Diameter 21.1", Length 60.19", 2.99" Bar Cap., 4,500 RPM, 25 HP, 60 Sta. ATC, Chip Conveyor, Live Tooling, More..Yes2005 Mori-Seiki MT-2500 SZ Mori-Seiki MSX-501 (Fanuc 18iM)
Mori-SeikiZL-253B SMC200316187LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEMitsubishi MSC-501 (18iTA)GoodYesSwing 26.77", Swing Over C.S. 20.08", Maximum Turning Diameter 15.35", Length 16.22", 3,500 RPM, 2.97" Bar Cap., 25 HP, 12 & 8 Sta. Turret, Live Tool Holder, Tool Presetter, More.Yes2003 Mori-Seiki ZL-253B SMC Mitsubishi MSC-501 (18iTA)
Nakamura-TomeSuper NJTX200816284LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 31i AExcellentYes Yes2008 Nakamura-Tome Super NJTX Fanuc 31i A
Nakamura-TomeWT-100200316716LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 16iTBGoodYesSwing 18.9", Swing Over C.S. 12.2", Maximum Turning Diameter 12.2", Length 29", Y-Axis 2", 6,000 RPM, 20 HP, 3 - 12 Sta. Turrets, Sub Spindle, Full C-Axis, Iemca Bar Feed, More..Yes2003 Nakamura-Tome WT-100 Fanuc 16iTB
Nakamura-TomeWT-100201616272LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 31iAExcellentYesSwing 9.6", Swing Over C.S. 7.6", Maximum Turning Diameter 6.89", Length 19.8", Y-Axis, 6,000 RPM, 15 HP, 2 - 12 Sta. Turrets, Sub Spindle, Full C-Axis, Gantry Loader, More..Yes2016 Nakamura-Tome WT-100 Fanuc 31iA
Nakamura-TomeWT-150 MMY200515918LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBGoodYesSwing 10", Swing Over C.S. 7.48", Maximum Turning Diameter 7.48", Length 19.803", Y-Axis, 5,000 RPM, 15 HP, 2 - 12 Sta. Turrets, Sub Spindle, Full C-Axis, Collet Chuck Main Spindle and Sub Spindle, Parts Catcher, Chip ConveyorYes2005 Nakamura-Tome WT-150 MMY Fanuc 18iTB
Nakamura-TomeWT-300 MMY200516643LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBVery GoodYes12.2" Swing, 10.63" Turn Dia., 43.31" Centers, 4,500 RPM, 25 HP, 2 - 24 Sta. Turrets, 10" 3-Jaw Hydraulic Chuck Main and Sub, Bar Feed Interface, Bar Feed, Gantry Load, More....Yes2005 Nakamura-Tome WT-300 MMY Fanuc 18iTB
Nakamura-TomeWT-300 MMY200512637LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 18iTBVery GoodYes12.2" Swing, 10.63" Turn Dia., 43.31" Centers, 4,500 RPM, 25 HP, 2 - 24 Sta. Turrets, 10" 3-Jaw Hydraulic Chuck Main and Sub, Bar Feed Interface, Bar Feed, More....Yes2005 Nakamura-Tome WT-300 MMY Fanuc 18iTB
Nakamura-TomeWY-100 II201816709LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 31iAExcellentYesSwing 11.2"", Swing Over C.S. 9.6", Maximum Turning Diameter 7.48", Length 19.8", 2.44" Y-Axis, 6,000 RPM, 15 HP, 2 - 12 Sta. Turrets, Sub Spindle, Full C-Axis, ATS Collet Chuck Main and Sub Spindle, Chip Conveyor, More..Yes2018 Nakamura-Tome WY-100 II Fanuc 31iA
Nakamura-TomeWY-250 L201316565LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEFanuc 31iAExcellentYesSwing 11.2", Swing Over C.S. 9.84", Maximum Turning Diameter 8.9", Length 35.8", Y-Axis, 4,500 RPM, 25 HP, 2 - 24 Sta. Turrets, Sub Spindle, Full C-Axis, Collet Chucks Both Spindles, Chip Conveyor, Much More.Yes2013 Nakamura-Tome WY-250 L Fanuc 31iA
OkumaLT-200 MY200516629LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEOSP-P100LGoodYesSwing 15.75", Swing Over Cross Slide 12.2", Maximum Turning Diameter 8.27", Length 21.26", 2" Bar Cap., 4,500 RPM, 15 HP, Barfeed Interface, Chip Conveyor, Parts Catcher, Live Tooling, More..Yes2005 Okuma LT-200 MY OSP-P100L
OkumaLT-200 MY200916349LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEOSP-E100LVery GoodYes Yes2009 Okuma LT-200 MY OSP-E100L
OkumaLT-300 M200516691LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEOSP-P100LGoodYesSwing 21.65", Swing Over C.S. 18.9", Maximum Turning Diameter 13.78", Length 35", 3,800 RPM, 3" Bar Cap., 30 HP, 2-12 Sta. Turret, More.Yes2005 Okuma LT-300 M OSP-P100L
OkumaLT-3000 EX 2TMY BB201616518LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEOSP-P300LExcellentYesSwing Over Bed 21.65", Swing Over Cross Slide 16.3", Maximum Turning Diameter 13.78", Length 33.3", 4,200 RPM, 30 HP, 16 + 16 Sta. Turrets, 12.4" 3-Jaw Chuck Main, 10" 3-Jaw Sub, Tool Pre-Setter, More..Yes2016 Okuma LT-3000 EX 2TMY BB OSP-P300L
OkumaLU-15 MW BB199714472LATHES, CNC, 4-AXIS, W-MILLING and SUB-SPINDLEOSP-7000LGoodYes20.87" Swing, 14.7" Turn Dia., 3,800 RPM, 30 HP, 12 + 8 Sta. Turret, 10" 3-Jaw Hydraulic Chuck Main, Sub-Spindle, Parts Catcher, One (1) Live Tool Holder, Big Bore Option, IGF, Bar Feed Interface, More..Yes1997 Okuma LU-15 MW BB OSP-7000L