Machine Tools 24-7

Phone 352-799-8398 - Fax 352-799-0315

At Machine Tools 24-7 we never stop working to serve your machine tool needs

Use Space Provided Below For Your Notes on This Machine Quote - When Ready - Click File - Then Print on your Browser

Machine Tools 24-7 Machine Quote - Click on the Machine ID Number Below to View Then Print Machine Photos 

Below are the specs we have on file for this machine.  Please contact Machine Tools 24-7 if you have any questions.

Machine IDYearManufacturerModelControl
167162003Nakamura-TomeWT-100Fanuc 16iTB

 DescriptionSpec Values
Capacity:Swing / Swing Over Cross Slide18.9" / 12.2"
 Maximum Cutting Diameter (turret one & turret two)12.2"
 Maximum Turning Length / Distance Between Spindles10.03" / 29"
Main Spindle:Speeds50 - 6,000 RPM
 Spindle Bore / Bar Cap / Spindle Nose2.8" / 1.65" / A2-5
 Motor (30 min. / cont.)20 / 15 HP
Sub-Spindle:Speeds50 - 8,000 RPM
 Spindle Bore / Bar Cap / Spindle Nose / Indexing2.8" / 1.65" / A2-5
 Motor (30 min. / cont.)20 / 15 HP
Turrets:Number of Positions (both upper turrets / lower turret)12 / 12 Tools Each
Travels:X-Axis Travel (both upper turrets / lower turret)8.16" / 8.16"
 Z-Axis Travel (both upper turrets / lower turret)11.81" / 31.49"
 Y-Axis Travel1" +/-
 B-Axis Travel (sub-spindle)34.44"
Rotary Tools:Rotary Tool Speed100 - 6,000 RPM
 Rotary Tool Motor (30 min. / cont. turret one & turret two)5 / 2.3 HP
Rapids:Rapid Traverse (X & B / Z / Y / B)708 / 1,416 / 393 IPM
 Cutting Feed Rate188 IPM
Dimensions:Floor Space (L x W x H)110" x 80" x 80"
 Weight (approx)22,000 Lbs

 Equipped With
Additional Info.:Collet Chuck On Main 6" 3-Jaw Chuck On Sub
 Chip Conveyor
 Miscellaneous Tooling
 Bar Feed Interface
 High Pressure Coolant
 Iemca Boss 545 Bar Feed
 Helical Interpolation
 Conversational Control

Type Your Notes About This Machine In The Space Below Before Printing

TERMS: Cash or Cashiers Check with order, and all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold "As Is, Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties, which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. -EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use, operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. - INDEMNIFICATION: Buyer/User agrees to Indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchasers responsibility to verify machine condition, specifications and pay any and all applicable taxes.