Machine Tools 24-7
All The Used CNC and Manual Machine Tools You Need - All Of The Time
Office (352) 799-8398
Fax (352) 799-0315
Click Here to Email Us
Copyright © 2015 Machine Tools 24-7. All Rights Reserved.
Click Here to Bookmark this Site

Machine Tools 24-7

Phone 352-799-8398 - Fax 352-799-0315

Quick Quote Request: Click Here to Request Quote

At Machine Tools 24-7 we never stop working to serve your machine tool needs

Machine Tools 24-7 Machine Quote - Click on the Machine ID Number Below to View Machine Photos Separately 

Below are the specs we have on file for this machine.  Please contact Machine Tools 24-7 if you have any questions.

Machine IDYearManufacturerModelControl
162722016Nakamura-TomeWT-100Fanuc 31iA

 DescriptionSpec Values
Capacity:Swing / Swing Over Cross Slide9.6" / 7.6"
 Maximum Cutting Diameter (turret one & turret two)6.89"
 Maximum Turning Length / Distance Between Spindles19.8" / 29"
Main Spindle:Speeds50 - 6,000 RPM
 Spindle Bore / Bar Cap / Spindle Nose2.8" / 1.65" / A2-5
 Motor (30 min. / cont.)15 / 10 HP
Sub-Spindle:Speeds50 - 6,000 RPM
 Spindle Bore / Bar Cap / Spindle Nose / Indexing2.8" / 1.65" / A2-5
 Motor (30 min. / cont.)15 / 10 HP
Turrets:Number of Positions (turret one / turret two) 12 Live x 212 / 12 Tools Each
Travels:X-Axis Travel (turret one X1 / turret two X2)5.31" / 5.31"
 Z-Axis Travel (turret one Z1 / turret two Z2)19.8" / 19.8" / 22.75"
 Y-Axis Travel1.33" +/-
 B-Axis Travel (sub-spindle)24.44"
Rotary Tools:Rotary Tool Speed100 - 6,000 RPM
 Rotary Tool Motor (30 min. / cont. turret one & turret two)10 / 5 HP
Rapids:Rapid Traverse (X & B / Z / Y / B)708 / 1,416 / 393 IPM
 Cutting Feed Rate188 IPM
Dimensions:Floor Space (L x W x H)110" x 80" x 80"
 Weight (approx)17,000 Lbs

 Equipped With
Additional Info.:Royal Quick Change Collet Chuck Main & Sub Spindle
 LNS Turbo HB Chip Conveyor
 Miscellaneous Tooling
 Bar Feed Interface
 High Pressure Coolant Through Both Spindle (2,000 psi)
 Gantry Loader
 Two (2) 6" 3-Jaw Chucks
 Helical Interpolation
 Conversational Control
 Seven (7) Live Holders
 Helical Interpolation
 FMB 5-55 Turbo Barfeed
 Rigid Tapping
 Two (2) USB Ports
Note:Machine Like New - 600 Cutting Hours

Click Here To Print Quote - 16272

Click Here to Email Request Quote

TERMS: Cash or Cashiers Check with order, and all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold "As Is, Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties, which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. -EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use, operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. - INDEMNIFICATION: Buyer/User agrees to Indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchasers responsibility to verify machine condition, specifications and pay any and all applicable taxes./span>


ManufacturerModelMachine IDMachine Photos
Nakamura-TomeWT-10016272 WT-100.jpg
Nakamura-TomeWT-10016272 WT-100 a.jpg
Nakamura-TomeWT-10016272 WT-100 b.jpg
Nakamura-TomeWT-10016272 WT-100 c.jpg
Nakamura-TomeWT-10016272 WT-100 d.jpg
Nakamura-TomeWT-10016272 WT-100 e.jpg
Nakamura-TomeWT-10016272 WT-100 f.jpg
Nakamura-TomeWT-10016272 WT-100 g.jpg
Nakamura-TomeWT-10016272 WT-100 h.jpg

Quick Links